In this paper,a novel efficient continuous piecewise nonlinear companding scheme is proposed for reducing the peak-to-average power ratio(PAPR)of orthogonal frequency division multiplexing(OFDM)systems.In the proposed...In this paper,a novel efficient continuous piecewise nonlinear companding scheme is proposed for reducing the peak-to-average power ratio(PAPR)of orthogonal frequency division multiplexing(OFDM)systems.In the proposed companding transform,signal samples with large amplitudes is clipped for peak power reduction,and the signal samples with medium amplitudes is nonlinear transformed with power compensation.While the signal samples with small amplitudes remain unchanged.The whole companding function is continuous and smooth in the range of positive numbers,which is beneficial for guaranteeing the bit error rate(BER)and power spectral density(PSD)performance.This scheme can achieve a significant reduction in PAPR.And at the same time,it cause little increment in BER and PSD performance.Simulation results indicate the superiority of the proposed scheme over existing companding schemes.展开更多
Many safety-critical applications that utilize the global navigation satellite system (GNSS) demand highly accurate positioning information, as well as highly integrity and reliability. Due to GNSS signals are easily ...Many safety-critical applications that utilize the global navigation satellite system (GNSS) demand highly accurate positioning information, as well as highly integrity and reliability. Due to GNSS signals are easily distorted by the interferences or disturbances, the signal quality monitoring (SQM) is necessary to detect the presence of dangerous signal distortions. In this paper, we developed an SQM software for binary offset carrier (BOC) modulated navigation signals. Firstly, the models of BOC signal with ideal and distortion are presented respectively. Then the architecture of SQM software is proposed. Moreover, the effect of the white gaussian noise (WGN) and the front-end filter on the correlation peak of the receiver is analyzed. Finally, the biases induced by the signal distortion are evaluated. The experiments simulate the relationships between the code phase shift and the normalized correlation value in the case of the signal digital distortion and the analog distortion. The simulation results demonstrate that the proposed SQM method can effectively monitor the signal distortion and accurately estimate the correlation peak deviation caused by the distortion.展开更多
正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)信号具有较高的峰均功率比(Peak to Average Power Ratio,PAPR),不仅影响功率放大器(High Power Amplifier,HPA)的工作效率,而且HPA使得OFDM信号产生严重的非线性失真,...正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)信号具有较高的峰均功率比(Peak to Average Power Ratio,PAPR),不仅影响功率放大器(High Power Amplifier,HPA)的工作效率,而且HPA使得OFDM信号产生严重的非线性失真,导致系统的误比特率(Bite Error Rate,BER)增大.本文基于限幅和压缩感知(Compressive Sensing,CS)提出了改进的补偿算法,发送端采用限幅降低信号的PAPR,接收端首先采用改进的逆模型方式减小HPA引入的非线性失真,再采用CS抵消由限幅引入的信号失真.仿真表明,所提方法不仅明显降低了OFDM信号的PAPR,而且有效提高了系统的BER性能.展开更多
正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)系统的主要缺点之一就是有较高的峰均功率比(Peak to Average Power Ratio,PAPR),降低了功率放大器(High Power Amplifier,HPA)的工作效率,同时HPA引入的非线性失真,恶...正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)系统的主要缺点之一就是有较高的峰均功率比(Peak to Average Power Ratio,PAPR),降低了功率放大器(High Power Amplifier,HPA)的工作效率,同时HPA引入的非线性失真,恶化了系统的误比特率(Bite Error Rate,BER)性能.本文所提算法将限幅和HPA引入的非线性失真视为一个整体来考虑,利用与限幅噪声在时域上的近似稀疏性,对整个非线性过程进行建模.发送端通过限幅降低了OFDM信号的PAPR,在接收端,选取受噪声干扰小的可靠性观测向量,最小化信道噪声的影响,基于非线性模型计算得到的参数,利用压缩感知(Compressive Sensing,CS)算法能有效地恢复总的非线性失真信号,提升了系统的BER性能.展开更多
正交频分复用技术(OFDM,Orthogonal Frequency Division Multiplexing)是一种有效的并行多载波传输方案,然而,OFDM技术存在一个主要缺点,即发送信号存在较高的峰值平均功率比(PAPR,Peak-to-Average Power Ratio)。研究表明高带宽效率的...正交频分复用技术(OFDM,Orthogonal Frequency Division Multiplexing)是一种有效的并行多载波传输方案,然而,OFDM技术存在一个主要缺点,即发送信号存在较高的峰值平均功率比(PAPR,Peak-to-Average Power Ratio)。研究表明高带宽效率的限幅类技术着眼于直接降低OFDM信号的峰均比,而幅度和相位预失真方法则是从放大器的角度出发,对放大器进行预失真处理,增大功率放大器的线性范围。这里提出将限幅类技术和预失真处理进行联合实现,从而在系统PAPR减小、失真补偿和误码率之间取得较好的折中。展开更多
On-line partial discharge(PD)detection still remains a very challenging task because of the strong electromagnetic interferences.In this paper,a new method of de-noising,using complex Daubechies wavelet(CDW)transform,...On-line partial discharge(PD)detection still remains a very challenging task because of the strong electromagnetic interferences.In this paper,a new method of de-noising,using complex Daubechies wavelet(CDW)transform,has been proposed.It is a relatively recent enhancement to the real-valued wavelet transform because of tow important properties,which are nearly shift-invariant and availability of phase information.Those properties give CDW transform superiority over other real-valued wavelet transform,and then the construction algorithm of CDW is introduced in detail.Secondly,based on the real threshold algorithm of real-valued wavelet transform,complex threshold algorithm is devised.This algorithm take the different characteristics of real part and imaginary part of complex wavelet coefficients into account,it modifies the real and imaginary parts of complex wavelet coefficients respectively.Thirdly,to obtain a real de-noised signal,new combined information series is devised.By applying different combination of real part and imaginary part of de-noised complex signal,a real de-noised signal can be restored with higher peak signal-to-noise ratio(PSNR)and less distortion of original signals.Finally,On-site applications of extracting PD signals from noisy background by the optimal de-noising scheme based on CDW are illustrated.The on-site experimental results show that the optimal de-noising scheme is an effective way to suppress white noise in PD measurement.展开更多
基金supported in part by the National Natural Science Foundation of China(No.61821001)。
文摘In this paper,a novel efficient continuous piecewise nonlinear companding scheme is proposed for reducing the peak-to-average power ratio(PAPR)of orthogonal frequency division multiplexing(OFDM)systems.In the proposed companding transform,signal samples with large amplitudes is clipped for peak power reduction,and the signal samples with medium amplitudes is nonlinear transformed with power compensation.While the signal samples with small amplitudes remain unchanged.The whole companding function is continuous and smooth in the range of positive numbers,which is beneficial for guaranteeing the bit error rate(BER)and power spectral density(PSD)performance.This scheme can achieve a significant reduction in PAPR.And at the same time,it cause little increment in BER and PSD performance.Simulation results indicate the superiority of the proposed scheme over existing companding schemes.
基金supported by the National Natural Science Foundation of China(61771393 61571368)
文摘Many safety-critical applications that utilize the global navigation satellite system (GNSS) demand highly accurate positioning information, as well as highly integrity and reliability. Due to GNSS signals are easily distorted by the interferences or disturbances, the signal quality monitoring (SQM) is necessary to detect the presence of dangerous signal distortions. In this paper, we developed an SQM software for binary offset carrier (BOC) modulated navigation signals. Firstly, the models of BOC signal with ideal and distortion are presented respectively. Then the architecture of SQM software is proposed. Moreover, the effect of the white gaussian noise (WGN) and the front-end filter on the correlation peak of the receiver is analyzed. Finally, the biases induced by the signal distortion are evaluated. The experiments simulate the relationships between the code phase shift and the normalized correlation value in the case of the signal digital distortion and the analog distortion. The simulation results demonstrate that the proposed SQM method can effectively monitor the signal distortion and accurately estimate the correlation peak deviation caused by the distortion.
文摘正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)信号具有较高的峰均功率比(Peak to Average Power Ratio,PAPR),不仅影响功率放大器(High Power Amplifier,HPA)的工作效率,而且HPA使得OFDM信号产生严重的非线性失真,导致系统的误比特率(Bite Error Rate,BER)增大.本文基于限幅和压缩感知(Compressive Sensing,CS)提出了改进的补偿算法,发送端采用限幅降低信号的PAPR,接收端首先采用改进的逆模型方式减小HPA引入的非线性失真,再采用CS抵消由限幅引入的信号失真.仿真表明,所提方法不仅明显降低了OFDM信号的PAPR,而且有效提高了系统的BER性能.
文摘正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)系统的主要缺点之一就是有较高的峰均功率比(Peak to Average Power Ratio,PAPR),降低了功率放大器(High Power Amplifier,HPA)的工作效率,同时HPA引入的非线性失真,恶化了系统的误比特率(Bite Error Rate,BER)性能.本文所提算法将限幅和HPA引入的非线性失真视为一个整体来考虑,利用与限幅噪声在时域上的近似稀疏性,对整个非线性过程进行建模.发送端通过限幅降低了OFDM信号的PAPR,在接收端,选取受噪声干扰小的可靠性观测向量,最小化信道噪声的影响,基于非线性模型计算得到的参数,利用压缩感知(Compressive Sensing,CS)算法能有效地恢复总的非线性失真信号,提升了系统的BER性能.
文摘正交频分复用技术(OFDM,Orthogonal Frequency Division Multiplexing)是一种有效的并行多载波传输方案,然而,OFDM技术存在一个主要缺点,即发送信号存在较高的峰值平均功率比(PAPR,Peak-to-Average Power Ratio)。研究表明高带宽效率的限幅类技术着眼于直接降低OFDM信号的峰均比,而幅度和相位预失真方法则是从放大器的角度出发,对放大器进行预失真处理,增大功率放大器的线性范围。这里提出将限幅类技术和预失真处理进行联合实现,从而在系统PAPR减小、失真补偿和误码率之间取得较好的折中。
基金Project Supported by National Natural Science Foundation China（50577069）, National Grid Company （2004-SGKJ）.
文摘On-line partial discharge(PD)detection still remains a very challenging task because of the strong electromagnetic interferences.In this paper,a new method of de-noising,using complex Daubechies wavelet(CDW)transform,has been proposed.It is a relatively recent enhancement to the real-valued wavelet transform because of tow important properties,which are nearly shift-invariant and availability of phase information.Those properties give CDW transform superiority over other real-valued wavelet transform,and then the construction algorithm of CDW is introduced in detail.Secondly,based on the real threshold algorithm of real-valued wavelet transform,complex threshold algorithm is devised.This algorithm take the different characteristics of real part and imaginary part of complex wavelet coefficients into account,it modifies the real and imaginary parts of complex wavelet coefficients respectively.Thirdly,to obtain a real de-noised signal,new combined information series is devised.By applying different combination of real part and imaginary part of de-noised complex signal,a real de-noised signal can be restored with higher peak signal-to-noise ratio(PSNR)and less distortion of original signals.Finally,On-site applications of extracting PD signals from noisy background by the optimal de-noising scheme based on CDW are illustrated.The on-site experimental results show that the optimal de-noising scheme is an effective way to suppress white noise in PD measurement.
