City metro tunnels are usually constructed as twin-parallel tunnels and their adjacent construction may lead to surface deformation,affecting the surface environment and the safety of the tunnels.Due to its strong dis...City metro tunnels are usually constructed as twin-parallel tunnels and their adjacent construction may lead to surface deformation,affecting the surface environment and the safety of the tunnels.Due to its strong dispersion,sandy cobble strata can be easily disturbed by shield tunneling.Based on the project of the Chengdu Metro Line 1,field and model tests were carried out to study the surface settlement caused by shield tunneling in sandy cobble strata by measuring surface settlement curves,ground loss ratios and construction influence zones.The discrete element method(DEM) was used to study the factors affecting the formation of ground arches in sandy cobble strata at the microscopic level.Results show that the shape of the surface settlement curve in sandy cobble strata is different from that in soft soil.The buried depth and clear spacing of the two tunnels had a significant impact on the formation of ground arches.展开更多
The flow fields surrounding two parallel moving bubbles rising from two identical orifices submerged in non-Newtonian fluid of carboxymethylcellulose （CMC） solution of three different mass concentration were measure...The flow fields surrounding two parallel moving bubbles rising from two identical orifices submerged in non-Newtonian fluid of carboxymethylcellulose （CMC） solution of three different mass concentration were measured experimentally by the use of particle image velocimetry （PIV）. The influences of gas flowrate, solution mass concentration, orifice interval and the angle between two bubble centers line and vertical direction on the flow field surrounding bubbles were discussed respectively by analyzing the velocity vector, velocity contours as well as individual velocity components. The results show that the liquid velocity both in front of two bubbles and behind increases with gas flowrate duo to shear-thinning effect of previous bubbles, whereas decreases with the increase of CMC concentration due to the increase of drag force acting on bubbles. The effect of the orifice interval on the flow field around two moving bubbles becomes gradually obvious as the interval becomes closer. Moreover, two adjacent side-by-side bubbles repulse each other during rising, leading to the practical interval between them increased somewhat above the orifice interval. When the distance between bubbles is less than the orifice interval 10 mm, the interaction between two neighboring bubbles changed from mutual repellence to attraction with the decrease of the angle of the line of linking two bubble centers to the vertical direction.展开更多
A model fermion has been produced in a theory of quantum gravity that establishes the existence of a mass gap and half-integral spin. The third requirement for the fermion is electric charge. We herein develop a duali...A model fermion has been produced in a theory of quantum gravity that establishes the existence of a mass gap and half-integral spin. The third requirement for the fermion is electric charge. We herein develop a dualism-based analysis that explains the origin of charge at the fermion scale in a primordial field theory of quantum gravity.展开更多
Since the invention of lasers,spatial-light-modulated laser processing has become a powerful tool for various applications.It enables multidimensional and dynamic modulation of the laser beam,which significantly impro...Since the invention of lasers,spatial-light-modulated laser processing has become a powerful tool for various applications.It enables multidimensional and dynamic modulation of the laser beam,which significantly improves the processing efficiency,accuracy,and flexibility,and presents wider prospects over traditional mechanical technologies for machining three-dimensional,hard,brittle,or transparent materials.In this review,we introduce:(1)The role of spatial light modulation technology in the development of femtosecond laser manufacturing;(2)the structured light generated by spatial light modulation and its generation methods;and(3)representative applications of spatial-light-modulated femtosecond laser manufacturing,including aberration correction,parallel processing,focal field engineering,and polarization control.Finally,we summarize the present challenges in the field and possible future research.展开更多
基金Project supported by the National Basic Research (973) Program of China (No. 2010CB732105)the National Natural Science Foundation of China (Nos. 50908193,50925830,and 51208432)
文摘City metro tunnels are usually constructed as twin-parallel tunnels and their adjacent construction may lead to surface deformation,affecting the surface environment and the safety of the tunnels.Due to its strong dispersion,sandy cobble strata can be easily disturbed by shield tunneling.Based on the project of the Chengdu Metro Line 1,field and model tests were carried out to study the surface settlement caused by shield tunneling in sandy cobble strata by measuring surface settlement curves,ground loss ratios and construction influence zones.The discrete element method(DEM) was used to study the factors affecting the formation of ground arches in sandy cobble strata at the microscopic level.Results show that the shape of the surface settlement curve in sandy cobble strata is different from that in soft soil.The buried depth and clear spacing of the two tunnels had a significant impact on the formation of ground arches.
基金Supported by the National Natural Science Foundation of China （20476073）, the State Key Laboratory of Chemical Engineering （SKL-ChE-08B03） and the Programs of Introducing Talents of Discipline to Universities 0306006）.
文摘The flow fields surrounding two parallel moving bubbles rising from two identical orifices submerged in non-Newtonian fluid of carboxymethylcellulose （CMC） solution of three different mass concentration were measured experimentally by the use of particle image velocimetry （PIV）. The influences of gas flowrate, solution mass concentration, orifice interval and the angle between two bubble centers line and vertical direction on the flow field surrounding bubbles were discussed respectively by analyzing the velocity vector, velocity contours as well as individual velocity components. The results show that the liquid velocity both in front of two bubbles and behind increases with gas flowrate duo to shear-thinning effect of previous bubbles, whereas decreases with the increase of CMC concentration due to the increase of drag force acting on bubbles. The effect of the orifice interval on the flow field around two moving bubbles becomes gradually obvious as the interval becomes closer. Moreover, two adjacent side-by-side bubbles repulse each other during rising, leading to the practical interval between them increased somewhat above the orifice interval. When the distance between bubbles is less than the orifice interval 10 mm, the interaction between two neighboring bubbles changed from mutual repellence to attraction with the decrease of the angle of the line of linking two bubble centers to the vertical direction.
文摘A model fermion has been produced in a theory of quantum gravity that establishes the existence of a mass gap and half-integral spin. The third requirement for the fermion is electric charge. We herein develop a dualism-based analysis that explains the origin of charge at the fermion scale in a primordial field theory of quantum gravity.
基金This work was supported by the National Key R&D Program of China(Grant No.2021YFB2802000)the National Natural Science Foundation of China(Grant Nos.61827826,62175086,62131018)+1 种基金the Natural Science Foundation of Jilin Province(Grant No.20220101107JC)the Education Department of Jilin Province(Grant No.JJKH20221003KJ).
文摘Since the invention of lasers,spatial-light-modulated laser processing has become a powerful tool for various applications.It enables multidimensional and dynamic modulation of the laser beam,which significantly improves the processing efficiency,accuracy,and flexibility,and presents wider prospects over traditional mechanical technologies for machining three-dimensional,hard,brittle,or transparent materials.In this review,we introduce:(1)The role of spatial light modulation technology in the development of femtosecond laser manufacturing;(2)the structured light generated by spatial light modulation and its generation methods;and(3)representative applications of spatial-light-modulated femtosecond laser manufacturing,including aberration correction,parallel processing,focal field engineering,and polarization control.Finally,we summarize the present challenges in the field and possible future research.
