Nano-particles which can largely improve the microstructure and oxidation resistance of materials are often used as a strengthening component in metal matrix composites. However, few studies were reported on its appli...Nano-particles which can largely improve the microstructure and oxidation resistance of materials are often used as a strengthening component in metal matrix composites. However, few studies were reported on its application in the bond coat of duplex structure thermal barrier coating（TBC）. Three kinds of NiCoCrAlY coatings strengthened by different nano-particles with the same addition （1%, mass fraction） were prepared by the laser cladding technique on Ni-based superalloy substrates, aiming to study the effects of the nano-particles on microstructure and oxidation resistance of NiCoCrAlY coatings （the bond coat of the duplex structure thermal barrier coatings）. Scanning electron microscope （SEM）, X-ray diffractometer（XRD） and thermogravimetry were employed to investigate their morphologies, phases and cyclic oxidation behaviors in atmosphere at 1 050℃, compared with the coating without nano-particles. With the addition of nano-particles, the growth pattern of the grains at the interface changed from epitaxial growth to non-epitaxial growth or part-epitaxial growth; slender dendrites were broken and cellularized; cracks and pores were restrained; and the oxidation weight-gain and the stripping resistance of the oxide scale were improved as well. Among the three kinds of nano-particles, the SiC nano-particles showed the most improvement on microstructure, while the CeO2 nano-particles were insufficient, but its effects on the oxidation resistance are the same as those of the SiC nano-particles. Based on the discussions of the influence mechanism, it is believed that CeO2 nano-particles would show better improvement than SiC nano-particles if the proper amount is added and the proper preparation technique of micro-nanometer composite powders is adopted, with the synergistic action of nanometer effect and reactive element effect.展开更多
By analyzing previous studies on activation energy of coal oxidation at low temperatures, a theoretical calculation model of apparent activation energy is established. Yield of CO is measured by using the characterist...By analyzing previous studies on activation energy of coal oxidation at low temperatures, a theoretical calculation model of apparent activation energy is established. Yield of CO is measured by using the characteristic detector of coal oxidation at 30-90 ℃. The impact of parameters, such as airflow and particle size, on activation energies is analyzed. Finally, agreement was obtained between activation energies and the dynamic oxygen absorbed in order to test the accuracy of the model. The results show that： 1） a positive exponential relation between concentration of CO and temperature in the process of the experiment is obtained： increases are almost identical and the initial CO is low; 2） the apparent activation energies increase gradually with the sizes of particle at the same airflow, but the gradients increase at a decreasing rate; 3） the apparent activation energies increase linearly with airflow. For the five coal particles, the differences among the energies are relatively high when the airflow was low, but the differences were low when the airflow was high; 4） the optimum sizes of particle, 0.125-0.25 ram, and the optimum volume of airflow, 100 mL/min, are determined from the model; 5） the apparent activation energies decrease with an increase in oxygen absorbed. A negative exponential relation between the two is obtained,展开更多
ZrO2/TiO2 composite photocatalytic film was produced on the pure titanium substrate using in-situ Zr（OH）4 colloidal particle by the micro-arc oxidation technique and characterized by scanning electron microscope （...ZrO2/TiO2 composite photocatalytic film was produced on the pure titanium substrate using in-situ Zr（OH）4 colloidal particle by the micro-arc oxidation technique and characterized by scanning electron microscope （SEM）, energy dispersive X-ray （EDX）, X-ray diffraction （XRD） and ultraviolet-visible （UV-Vis） spectrophotometer. The composite film shows a lamellar and porous structure which consists of anatase, futile and ZrO2 phases. The optical absorption edge of film is shifted to longer wavelength when ZrO2 is introduced to TiO2. Furthermore, the photocatalytic reaction rate constants of degradation of rhodamine B solution with ZrO2/TiO2 composite film and pure TiO2 film under ultraviolet irradiation are measured as 0.0442 and 0.0186 h 1, respectively.展开更多
The kinetics of oxidation roasting of molybdenum concentrate was studied by differential thermal−gravimetric experiments and non-isothermal analysis methods.The results show that high temperature is beneficial for oxi...The kinetics of oxidation roasting of molybdenum concentrate was studied by differential thermal−gravimetric experiments and non-isothermal analysis methods.The results show that high temperature is beneficial for oxidation of molybdenum concentrate.The initial oxidation temperature of the molybdenum concentrate is 450℃,and the rapid oxidation occurs above 500℃.The oxidation process conforms to the unreacted shrinking nucleus model.The early stage of the oxidation is controlled by chemical reaction with the apparent activation energy of 123.180 kJ/mol,while the later stage is controlled by internal diffusion with the apparent activation energy of 80.175 kJ/mol.Moreover,the oxidation rate is closely related to particle size of the concentrate.The smaller the particle size is,the larger the oxidation rate is.展开更多
The feasibility of decomplexation removal of typical contaminants in electroplating wastewater,complexed Cu(Ⅱ)with 1-hydroxyethylidene-1,1-diphosphonic acid(Cu-HEDP),was first performed by a three-dimensional electro...The feasibility of decomplexation removal of typical contaminants in electroplating wastewater,complexed Cu(Ⅱ)with 1-hydroxyethylidene-1,1-diphosphonic acid(Cu-HEDP),was first performed by a three-dimensional electrode reactor with activated biochar as particle electrodes.For the case of 50 mg/L Cu-HEDP,Cu(Ⅱ)removal(90.7%)and PO_(4)^(3−)conversion(34.9%)were achieved under the conditions of electric current 40 mA,initial pH 7,acid-treated almond shell biochar(AASB)addition 20 g/L,and reaction time 180 min,with second-order rate constants of 1.10×10^(−3) and 1.94×10^(−5) min^(−1) respectively.The growing chelating effect between Cu(II)and HEDP and the comprehensive actions of adsorptive accumulation,direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP,even though the mineralization of HEDP was mainly dependent on anode oxidation.The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction,especially acidic carboxylic groups and quinones on particle electrodes,which decreased from 446.74 to 291.48μmol/g,and 377.55 to 247.71μmol/g,respectively.Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H_(2)O_(2) and reactive oxygen species(e.g.,•OH),a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.展开更多
基金supported by Specialized Research Fund for Doctoral Program of Higher Education of China (Grant No. 20060287019)Opening Research Fund of Jiangsu Provincial Key Laboratory of Tribology of China (Grant No. kjsmcx07001)Jiangsu Provincial Graduate Innovation Foundation of China (Grant No. CX08B-039Z)
文摘Nano-particles which can largely improve the microstructure and oxidation resistance of materials are often used as a strengthening component in metal matrix composites. However, few studies were reported on its application in the bond coat of duplex structure thermal barrier coating（TBC）. Three kinds of NiCoCrAlY coatings strengthened by different nano-particles with the same addition （1%, mass fraction） were prepared by the laser cladding technique on Ni-based superalloy substrates, aiming to study the effects of the nano-particles on microstructure and oxidation resistance of NiCoCrAlY coatings （the bond coat of the duplex structure thermal barrier coatings）. Scanning electron microscope （SEM）, X-ray diffractometer（XRD） and thermogravimetry were employed to investigate their morphologies, phases and cyclic oxidation behaviors in atmosphere at 1 050℃, compared with the coating without nano-particles. With the addition of nano-particles, the growth pattern of the grains at the interface changed from epitaxial growth to non-epitaxial growth or part-epitaxial growth; slender dendrites were broken and cellularized; cracks and pores were restrained; and the oxidation weight-gain and the stripping resistance of the oxide scale were improved as well. Among the three kinds of nano-particles, the SiC nano-particles showed the most improvement on microstructure, while the CeO2 nano-particles were insufficient, but its effects on the oxidation resistance are the same as those of the SiC nano-particles. Based on the discussions of the influence mechanism, it is believed that CeO2 nano-particles would show better improvement than SiC nano-particles if the proper amount is added and the proper preparation technique of micro-nanometer composite powders is adopted, with the synergistic action of nanometer effect and reactive element effect.
基金Project 50474067 supported by National Natural Science Foundation of China
文摘By analyzing previous studies on activation energy of coal oxidation at low temperatures, a theoretical calculation model of apparent activation energy is established. Yield of CO is measured by using the characteristic detector of coal oxidation at 30-90 ℃. The impact of parameters, such as airflow and particle size, on activation energies is analyzed. Finally, agreement was obtained between activation energies and the dynamic oxygen absorbed in order to test the accuracy of the model. The results show that： 1） a positive exponential relation between concentration of CO and temperature in the process of the experiment is obtained： increases are almost identical and the initial CO is low; 2） the apparent activation energies increase gradually with the sizes of particle at the same airflow, but the gradients increase at a decreasing rate; 3） the apparent activation energies increase linearly with airflow. For the five coal particles, the differences among the energies are relatively high when the airflow was low, but the differences were low when the airflow was high; 4） the optimum sizes of particle, 0.125-0.25 ram, and the optimum volume of airflow, 100 mL/min, are determined from the model; 5） the apparent activation energies decrease with an increase in oxygen absorbed. A negative exponential relation between the two is obtained,
基金Project(gf200901002)supported by the Open Research Fund of National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology of Nanchang Hangkong University,China
文摘ZrO2/TiO2 composite photocatalytic film was produced on the pure titanium substrate using in-situ Zr（OH）4 colloidal particle by the micro-arc oxidation technique and characterized by scanning electron microscope （SEM）, energy dispersive X-ray （EDX）, X-ray diffraction （XRD） and ultraviolet-visible （UV-Vis） spectrophotometer. The composite film shows a lamellar and porous structure which consists of anatase, futile and ZrO2 phases. The optical absorption edge of film is shifted to longer wavelength when ZrO2 is introduced to TiO2. Furthermore, the photocatalytic reaction rate constants of degradation of rhodamine B solution with ZrO2/TiO2 composite film and pure TiO2 film under ultraviolet irradiation are measured as 0.0442 and 0.0186 h 1, respectively.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(52074364).
文摘The kinetics of oxidation roasting of molybdenum concentrate was studied by differential thermal−gravimetric experiments and non-isothermal analysis methods.The results show that high temperature is beneficial for oxidation of molybdenum concentrate.The initial oxidation temperature of the molybdenum concentrate is 450℃,and the rapid oxidation occurs above 500℃.The oxidation process conforms to the unreacted shrinking nucleus model.The early stage of the oxidation is controlled by chemical reaction with the apparent activation energy of 123.180 kJ/mol,while the later stage is controlled by internal diffusion with the apparent activation energy of 80.175 kJ/mol.Moreover,the oxidation rate is closely related to particle size of the concentrate.The smaller the particle size is,the larger the oxidation rate is.
基金supported by the support from Youth Program of National Natural Science Foundation of China (No.52000051)Initial Scientific Research Foundation of Overseas High-level Talents of Harbin Institute of Technology (Shenzhen)(No.FA11409004)Natural Science Foundation of Guangdong Province (No.2017A030310670)
文摘The feasibility of decomplexation removal of typical contaminants in electroplating wastewater,complexed Cu(Ⅱ)with 1-hydroxyethylidene-1,1-diphosphonic acid(Cu-HEDP),was first performed by a three-dimensional electrode reactor with activated biochar as particle electrodes.For the case of 50 mg/L Cu-HEDP,Cu(Ⅱ)removal(90.7%)and PO_(4)^(3−)conversion(34.9%)were achieved under the conditions of electric current 40 mA,initial pH 7,acid-treated almond shell biochar(AASB)addition 20 g/L,and reaction time 180 min,with second-order rate constants of 1.10×10^(−3) and 1.94×10^(−5) min^(−1) respectively.The growing chelating effect between Cu(II)and HEDP and the comprehensive actions of adsorptive accumulation,direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP,even though the mineralization of HEDP was mainly dependent on anode oxidation.The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction,especially acidic carboxylic groups and quinones on particle electrodes,which decreased from 446.74 to 291.48μmol/g,and 377.55 to 247.71μmol/g,respectively.Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H_(2)O_(2) and reactive oxygen species(e.g.,•OH),a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.
