A sequence of laboratory experiments using solitary waves was performed to model the effect of leading form of three types of tsunamis（a bore,an impinging wave and an overtopping wave）on a seawall on a sloping beach...A sequence of laboratory experiments using solitary waves was performed to model the effect of leading form of three types of tsunamis（a bore,an impinging wave and an overtopping wave）on a seawall on a sloping beach.The wave evolution process,impinging pressure along the seawall surface,total overtopping discharge behind the seawall and the maximum run-up height on the rear slope were measured and compared.Laboratory data were employed to re-examine relevant empirical formulae in the literature.The effect of the presence of the seawall in reducing maximum run-up height using the present setup was briefly discussed.The present data can be used for calibrating numerical and mathematical models.展开更多
Based on the filtered Navier-Stokes equations and Smagorinsky turbulence model, a numerical wave flume is developed to investigate the overtopping process of irregular waves over smooth sea dikes. Simulations of fully...Based on the filtered Navier-Stokes equations and Smagorinsky turbulence model, a numerical wave flume is developed to investigate the overtopping process of irregular waves over smooth sea dikes. Simulations of fully nonlinear standing wave and regular wave＇s run-up on a sea dike are carried out to validate the implementation of the numerical wave flume with wave generation and absorbing modules. To model stationary ergodic stochastic processes, several cases with different random seeds are computed for each specified irregular wave spectrum. It turns out that the statistical mean overtopping discharge shows good agreement with empirical formulas, other numerical results and experimental data.展开更多
In the context of global climate change,the impact of group-occurring ocean dynamic disasters on China's offshore areas is becoming more and more intense.The study of the effect of existing ocean dynamic disasters...In the context of global climate change,the impact of group-occurring ocean dynamic disasters on China's offshore areas is becoming more and more intense.The study of the effect of existing ocean dynamic disasters on offshore hazard-bearing bodies mostly focuses on the effect of single disaster-causing factors,and it is still insufficient to study storm surge and dynamic wave coupling&reinforcement effects as well as the process of the dynamic response of such hazard-bearing bodies as seawalls.This study firstly realized the synchronous process of water level and wave through continuous tide generation and wave generation by the wave maker and tide generating device,so as to realize the dynamic coupling simulation of storm surge and wave in the laboratory.Then the physical model test of the typical seawall section was carried out under the dynamic coupling of storm surge and wave as well as at a conventional fixed water level respectively.In the process of test wave overtopping discharge and the damage process of the levee crown and backwall of seawalls were observed and compared,and their damage mechanism was also studied.展开更多
In this article, the use of a high-order Boussinesq-type model and sets of laboratory experiments in a large scale flume of breaking solitary waves climbing up slopes with two inclinations are presented to study the s...In this article, the use of a high-order Boussinesq-type model and sets of laboratory experiments in a large scale flume of breaking solitary waves climbing up slopes with two inclinations are presented to study the shoreline behavior of breaking and non-breaking solitary waves on plane slopes. The scale effect on run-up height is briefly discussed. The model simulation capability is well validated against the available laboratory data and present experiments. Then, serial numerical tests are conducted to study the shoreline motion correlated with the effects of beach slope and wave nonlinearity for breaking and non-breaking waves. The empirical formula proposed by Hsiao et al. for predicting the maximum run-up height of a breaking solitary wave on plane slopes with a wide range of slope inclinations is confirmed to be cautious. Furthermore, solitary waves impacting and overtopping an impermeable sloping seawall at various water depths are investigated. Laboratory data of run-up height, shoreline motion, free surface elevation and overtopping discharge are presented. Comparisons of run-up, run-down, shoreline trajectory and wave overtopping discharge are made. A fairly good agreement is seen between numerical results and experimental data. It elucidates that the present depth-integrated model can be used as an efficient tool for predicting a wide spectrum of coastal problems.展开更多
As the Armor shape has a significant effect on the reduction of wave overtopping, this study compares the performance of various shapes of concrete armored blocks of X block and Tetrapod as the most suitable armors. I...As the Armor shape has a significant effect on the reduction of wave overtopping, this study compares the performance of various shapes of concrete armored blocks of X block and Tetrapod as the most suitable armors. In this study, a three-dimensional numerical model was used for simulation of the effects of waves on the armors of Tetrapod and X Block breakwaters. In this regard, in order to calibrate the numerical model, a sample of conventional stone armor has been selected and using available experimental data on the design of armor such as wave overtopping, wave height, period of waves and energy density of the required spectral range of wave verification was conducted on a numerical model. In this regard, it is necessary to calibrate all the conditions of the model including boundary conditions, numerical modeling, initial conditions, numerical solvers and other parameters in the numerical model and simulation error rate is determined. The maximum error of the numerical model for the relative height values of the impact waves on the structure of breakwater is 7.87% for different conditions. Accordingly, the maximum error of the numerical model in determining overtopping values is 7.81%. The average fluctuation value of overtopping in the X block armor has dropped by about 31% compared to the tetrapod armor.展开更多
基金support from the National Science Council of Taiwan(Grant No.NSC100-2628-E-006-017)supports from the Tainan Hydraulics Laboratory
文摘A sequence of laboratory experiments using solitary waves was performed to model the effect of leading form of three types of tsunamis（a bore,an impinging wave and an overtopping wave）on a seawall on a sloping beach.The wave evolution process,impinging pressure along the seawall surface,total overtopping discharge behind the seawall and the maximum run-up height on the rear slope were measured and compared.Laboratory data were employed to re-examine relevant empirical formulae in the literature.The effect of the presence of the seawall in reducing maximum run-up height using the present setup was briefly discussed.The present data can be used for calibrating numerical and mathematical models.
基金supported by the National Natural Science Foundation of China (Grant No. 10972138)the Natural Science Foundation of Shanghai Municipality (Grant No. 11ZR1418200)+1 种基金Key Project of Science and Technology Commission of Shanghai Municipality (Grant No. 09231203402)Key Doctoral Programme Foundation of Shanghai Municipality (Grant No. B206)
文摘Based on the filtered Navier-Stokes equations and Smagorinsky turbulence model, a numerical wave flume is developed to investigate the overtopping process of irregular waves over smooth sea dikes. Simulations of fully nonlinear standing wave and regular wave＇s run-up on a sea dike are carried out to validate the implementation of the numerical wave flume with wave generation and absorbing modules. To model stationary ergodic stochastic processes, several cases with different random seeds are computed for each specified irregular wave spectrum. It turns out that the statistical mean overtopping discharge shows good agreement with empirical formulas, other numerical results and experimental data.
基金Supported by the National Key R&D Program of China(No.2016YFC1402002)the Fifteenth Session Program between China and Bulgaria Scientific and Technological Cooperation Committee(No.15-13)the Major Project of Nanjing Hydraulic Research Institute Funds(Nos.Y218005,Y218006)
文摘In the context of global climate change,the impact of group-occurring ocean dynamic disasters on China's offshore areas is becoming more and more intense.The study of the effect of existing ocean dynamic disasters on offshore hazard-bearing bodies mostly focuses on the effect of single disaster-causing factors,and it is still insufficient to study storm surge and dynamic wave coupling&reinforcement effects as well as the process of the dynamic response of such hazard-bearing bodies as seawalls.This study firstly realized the synchronous process of water level and wave through continuous tide generation and wave generation by the wave maker and tide generating device,so as to realize the dynamic coupling simulation of storm surge and wave in the laboratory.Then the physical model test of the typical seawall section was carried out under the dynamic coupling of storm surge and wave as well as at a conventional fixed water level respectively.In the process of test wave overtopping discharge and the damage process of the levee crown and backwall of seawalls were observed and compared,and their damage mechanism was also studied.
基金financially supported by the National Science Council(Grant NSC101-2628-E-015-MY3)
文摘In this article, the use of a high-order Boussinesq-type model and sets of laboratory experiments in a large scale flume of breaking solitary waves climbing up slopes with two inclinations are presented to study the shoreline behavior of breaking and non-breaking solitary waves on plane slopes. The scale effect on run-up height is briefly discussed. The model simulation capability is well validated against the available laboratory data and present experiments. Then, serial numerical tests are conducted to study the shoreline motion correlated with the effects of beach slope and wave nonlinearity for breaking and non-breaking waves. The empirical formula proposed by Hsiao et al. for predicting the maximum run-up height of a breaking solitary wave on plane slopes with a wide range of slope inclinations is confirmed to be cautious. Furthermore, solitary waves impacting and overtopping an impermeable sloping seawall at various water depths are investigated. Laboratory data of run-up height, shoreline motion, free surface elevation and overtopping discharge are presented. Comparisons of run-up, run-down, shoreline trajectory and wave overtopping discharge are made. A fairly good agreement is seen between numerical results and experimental data. It elucidates that the present depth-integrated model can be used as an efficient tool for predicting a wide spectrum of coastal problems.
文摘As the Armor shape has a significant effect on the reduction of wave overtopping, this study compares the performance of various shapes of concrete armored blocks of X block and Tetrapod as the most suitable armors. In this study, a three-dimensional numerical model was used for simulation of the effects of waves on the armors of Tetrapod and X Block breakwaters. In this regard, in order to calibrate the numerical model, a sample of conventional stone armor has been selected and using available experimental data on the design of armor such as wave overtopping, wave height, period of waves and energy density of the required spectral range of wave verification was conducted on a numerical model. In this regard, it is necessary to calibrate all the conditions of the model including boundary conditions, numerical modeling, initial conditions, numerical solvers and other parameters in the numerical model and simulation error rate is determined. The maximum error of the numerical model for the relative height values of the impact waves on the structure of breakwater is 7.87% for different conditions. Accordingly, the maximum error of the numerical model in determining overtopping values is 7.81%. The average fluctuation value of overtopping in the X block armor has dropped by about 31% compared to the tetrapod armor.
