In quartzo-feldspathic continental crust with moderate-to-high heat flow,seismic activity extends to depths of 10-20 km,bounded by isotherms in the 350-450 C range.Fluid overpressuring above hydrostatic in seismogenic...In quartzo-feldspathic continental crust with moderate-to-high heat flow,seismic activity extends to depths of 10-20 km,bounded by isotherms in the 350-450 C range.Fluid overpressuring above hydrostatic in seismogenic crust,is heterogeneous but tends to develop in the lower seismogenic zone(basal seismogenic zone reservoir=b.s.z.reservoir) where the transition between hydrostatically pressured and overpressured crust is likely an irregular,time-dependent.3-D interface with overpressuring concentrated around active faults and their ductile shear zone roots.The term Arterial Fault is applied to fault structures that root in portions of the crust where pore fluids are overpressured(i.e.at> hydrostatic pressure) and serve as feeders for such fluids and their contained solutes into overlying parts of the crust.While arterial flow may occur on any type of fault,it is most likely to be associated with reverse faults in areas of horizontal compression where fluid overpressuring is most easily sustained.Frictional stability and flow permeability of faults are both affected by the state of stress on the fault(shear stress,τ;normal stress,σn),the level of pore-fluid pressure,Pf,and episodes of fault slip,allowing for a complex interplay between fault movement and fluid flow.For seismically active faults the time dependence of permeability is critical,leading to fault-valve behaviour whereby overpressures accumulate at depth during interseismic intervals with fluid discharged along enhanced fault-fracture permeability following each rupture event.Patterns of mineralization also suggest that flow along faults is non-uniform,concentrating along tortuous pathways within the fault surface.Equivalent hydrostatic head above ground level for near-lithostatic overpressures at depth(<1.65×depth of zone) provides a measure of arterial potential.Settings for arterial faults include fault systems developed in compacting sedimentary basins,faults penetrating zones of active plutonic intrusion that encounter overpressured fluids exsolv展开更多
In paper the role of excess pressures in cata- genic processes of the South-Caspian basin (SCB) is considered. The results of the carried out researches taking into account world ex- perience on the given problem allo...In paper the role of excess pressures in cata- genic processes of the South-Caspian basin (SCB) is considered. The results of the carried out researches taking into account world ex- perience on the given problem allow to con- clude, that SCB (mainly its deep-water part), as well as a number of other basins of the world with overpressures, is characterized by retarda- tion of processes cracking of kerogen and oil, and also reaction of transformation of clay minerals. Periodic intensification of these pro- cesses can provoke development of diapirs and mud volcanoes, which are the centers of pulse unloading of a hydrocarbon products from sys- tem. The conclusion about high prospects of revealing of hydrocarbon accumulations in deep buried deposits in overpressured basins is made.展开更多
Growth of ln0.52Al0.48As epitaxial layers on lnP(100) substrates by molecular beam epitaxy at a wide range of arsenic overpressures (V/III flux ratios from 30 to 300) has been carried out. Analysis performed using low...Growth of ln0.52Al0.48As epitaxial layers on lnP(100) substrates by molecular beam epitaxy at a wide range of arsenic overpressures (V/III flux ratios from 30 to 300) has been carried out. Analysis performed using low-temperature photoluminescence (PL) and double-axis X-ray diffraction (XRD) shows a strong and prominent dependence of the PL and XRD linewidths on the V/III flux ratio. Under our growth conditions, both the PL and XRD linewidths exhibit a minimum point at a V/III flux ratio of 150 which corresponds to a maximum in the PL intensity and XRD intensity ratio. Flux ratios exceeding 150 result in an increase in both the PL and XRD linewidths corresponding to a reduction in their associated intensities. Room temperature Raman scattering measurements show a narrowing in the lnAs-like and AlAs-like longitudinal-optic (LO)phonon linewidths which broaden at high flux ratios, while the LO phonon frequencies exhibit a gradual reduction as the flux ratio is increased. PL spectra taken at increasing temperatures show a quenching of the main emission peak followed by the evolution of a broad lower energy emission which is possibly associated with deep lying centres. This effect is more prominent in samples grown at lower V/III flux ratios. Hall effect measurements show a gradual reduction in the mobility in correspondence to an increase in the electron concentration as the flux ratio is increased.展开更多
Carbonate cemented zones are normally adjacent to the top overpressured surface in the central Junggar Basin,NW China.Stable carbon and oxygen isotopic compositions and petrological investigations of carbonate cements...Carbonate cemented zones are normally adjacent to the top overpressured surface in the central Junggar Basin,NW China.Stable carbon and oxygen isotopic compositions and petrological investigations of carbonate cements in the carbonate cemented zones indicate that:(1) carbonate cements are composed dominantly of ferrocalcite,ferroan dolomite,and ankerite;(2) carbonate cements are formed under a high temperature circumstance in the subsurface,and organic fluid migration has an important effect on the formation of them;and(3) carbon and oxygen ions in the carbonate cements migrate from the underlying overpressured system.This suggests that the occurrence of carbonate cemented zones in this region results from multiple phases of organic fluid expulsion out of the overpressure compartment through geological time.This study provides a plausible mechanism of the formation of carbonate cemented zones adjacent to the top overpressured surface in the clastic sedimentary basins,and has an important implication for understanding the internal correlation between the formation of carbonate cemented zones adjacent to top overpressured surface and geofluids expulsion out of overpressured system.展开更多
The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa （pressure coefficient=l.91） ...The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa （pressure coefficient=l.91） and the temperature is as high as 143°C （geothermal gradient 4.36°C/100 m）, indicating that it is a typical high-temperature and overpressured gas reservoir. The natural gas is interpreted to be coal-type gas derived from the Miocene mature source rocks containing type Ⅱ2-Ⅲ kero- gens as evidenced by high dryness index of up to 0.98 and heavy carbon isotopes, i.e., the δ13C2 ranging from -30.76%o to -37.52%o and δ13C2 ranging from -25.02%o to -25.62%o. The high temperature and overpressured Miocene petroleum system is related mainly to diapir in the Yinggehai Basin and contains more pore water in the overpressured reservoirs due to under- compaction process. The experimental and calculated results show that the solubility of natural gas in formation water is as high as 10.5 m3/m3 under the temperature and pressure conditions of the Sanya Formation, indicating that at least part of the gas may migrate in the form of water-soluble phase. Meanwhile, the abundant gas source in the Basin makes it possible for the rapid saturation of natural gas in formation water and exsolution of soluble gas. Therefore, the main elements controlling formation of the Dongfang 13-1 gas pool include that （1） the diapir activities and accompanying changes in temperature and pressure accelerate the water-soluble gas exsolution and release a lot of free gas; （2） submarine fan fine sandstone in the Huangliu Formation provides good gas-water segregation and accumulation space; and （3） the overlying overpressured mud rocks act as effective caps. The accumulation mechanism reveals that the high temperatural and high pressure structure belt near the diapir structures has a good potential for large and medium-sized gas field exploration.展开更多
This study examined the geochemical features of pore water in the diapiric area of the Yinggehai Basin, northwestern South China Sea, and illuminated the origin and evolution of basin fluids. Pore water with low salin...This study examined the geochemical features of pore water in the diapiric area of the Yinggehai Basin, northwestern South China Sea, and illuminated the origin and evolution of basin fluids. Pore water with low salinity occurs in marine sediments in the diapiric area even without meteoric water infiltration. The presence of low-salinity water within deep, overpressured compartments is assumed to be due to smectite-illite transformation. Howerver, in shallow portions（less than 2 000 m） of diapiric areas with normal pressure, pore water has a much wider variation and much lower salinity than that in the overpressured intervals. Its total dissolved solid（TDS） content is ~5 336 to 35 939 mg/L. Moreover, smectite and chlorite content sharply decreases as kaolinite and illite content increase in shallower intervals. The geochemical variation of pore water in diapiric structures indicates the expulsion of low-salinity, overpressured fluids along vertical faults. Strong injection of hot fluids from deep overpressured sediments results in rapid clay mineral transformation in shallow reservoirs. Consequently, fluid mixing due to fluid expulsion from deeper overpressured deposits leads to variation in salinity and ionic composition as well as some diagenetic reactions. This includes transformation of clay minerals caused by the higher temperatur of deeper hot fluids, e.g., the transfromation of smectite to illite and chlorite to kaolinite. Therefore, variations in salinity and ionic compositions in various pressured systems provide a clue to flow pathways and associated diagenetic reactions.展开更多
The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on pet...The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on petroleum accumulation. (1) The overpressured fluid flow has enhanced the maturation of shallow-buried source rocks, which has caused the source rocks that would have remained immature under the conduction background to be mature for hydrocarbon generation. As a result, the overpressured fluid flow has increased the volume and interval of mature source rocks. (2) The overpressured fluid flow has strong extraction effects on the immature or low-mature source rocks in the shallow parts. This has increased, to some extent, the expulsion efficiency of the source rocks. More importantly, the extraction effects have strongly limited the effectiveness of biomarker parameters from oil and condensate in reflecting the source and maturity of the oil and gas. (3) The flow has caused the sandstones in the shallow parts to get into the late diagenesis stage, and significantly reduced the porosity and permeability of the sandstones. This study confirms that even in sedimentary basins in which no topography-driven groundwater flow systems have ever developed, the cross-formation migration of overpressured fluids and the resultant energy conduction and material exchange can significantly affect the thermal regime, source rock maturation and sandstone diagenesis. As a result, the effects of overpressured fluid flow must be taken into account in analyzing the mechanism of petroleum accumulation.展开更多
Based on the analyses of generation, migration and accumulation of oil and gas in the structures of Kela 1, Kela 2 and Kela 3 in Kasangtuokai anticlinal belt using a series of geological and geochemical evidence, this...Based on the analyses of generation, migration and accumulation of oil and gas in the structures of Kela 1, Kela 2 and Kela 3 in Kasangtuokai anticlinal belt using a series of geological and geochemical evidence, this paper proposes that the rapid rate of hydrocarbon generation, main drain path for over-pressured fluid flow and converging conduit system are indispensable conditions for the rapid, late-stage gas accumulation in the Kelasu thrust belt in the Kuqa depression. Due to structural over-lapping and the resultant rapid burial, the maturity of the source rocks had been increased rapidly from 1.3 to 2.5% Ro within 2.3 Ma, with an average rate of Ro increase up to 0.539% Ro/Ma. The rapid matura-tion of the source rocks had provided sufficient gases for late-stage gas accumulation. The kelasu structural belt has a variety of faults, but only the fault that related with fault propagation fold and cut through the gypsiferous mudstone cap could act as the main path for overpressured fluid release and then for fast gas accumulation in low fluid potential area. All the evidence from surface structure map, seismic profile explanation, authigenic kaolinite and reservoir property demonstrates that the main drain path related with faults for overpressured fluid and the converging conduit system are the key point for the formation of the giant Kela 2 gas field. By contrast, the Kela 1 and Kela 3 structures lo-cated on both sides of Kela 2 structure, are not favourable for gas accumulation due to lacking con-verging conduit system.展开更多
The conduit system of heat fluids in diapiric belt of Yinggehai basin is dominantly vertical faults and fractures . Detailed research on the formation mechanism and their occurrence features shows that the faults and ...The conduit system of heat fluids in diapiric belt of Yinggehai basin is dominantly vertical faults and fractures . Detailed research on the formation mechanism and their occurrence features shows that the faults and fractures can be classified into three types: intrastratal dispersive hydrofracture, puncturing fault and upwarping-extensional fault. The development of the fault and fracture system not only resulted in the changes of the temperature and pressure fields in the basin, but also affected the hydrocarbon migration in the overpressured system. These faults and fractures constituted the main pathways for vertical hydrocarbon migration, and opening and closing intermittently led to episodic expulsion of overpressured fluid compartment. Thus there formed the pool-forming model of multi-source mixing and ploy-stage migration and accumulation for hydrocarbons in the Yinggehai basin.展开更多
文摘In quartzo-feldspathic continental crust with moderate-to-high heat flow,seismic activity extends to depths of 10-20 km,bounded by isotherms in the 350-450 C range.Fluid overpressuring above hydrostatic in seismogenic crust,is heterogeneous but tends to develop in the lower seismogenic zone(basal seismogenic zone reservoir=b.s.z.reservoir) where the transition between hydrostatically pressured and overpressured crust is likely an irregular,time-dependent.3-D interface with overpressuring concentrated around active faults and their ductile shear zone roots.The term Arterial Fault is applied to fault structures that root in portions of the crust where pore fluids are overpressured(i.e.at> hydrostatic pressure) and serve as feeders for such fluids and their contained solutes into overlying parts of the crust.While arterial flow may occur on any type of fault,it is most likely to be associated with reverse faults in areas of horizontal compression where fluid overpressuring is most easily sustained.Frictional stability and flow permeability of faults are both affected by the state of stress on the fault(shear stress,τ;normal stress,σn),the level of pore-fluid pressure,Pf,and episodes of fault slip,allowing for a complex interplay between fault movement and fluid flow.For seismically active faults the time dependence of permeability is critical,leading to fault-valve behaviour whereby overpressures accumulate at depth during interseismic intervals with fluid discharged along enhanced fault-fracture permeability following each rupture event.Patterns of mineralization also suggest that flow along faults is non-uniform,concentrating along tortuous pathways within the fault surface.Equivalent hydrostatic head above ground level for near-lithostatic overpressures at depth(<1.65×depth of zone) provides a measure of arterial potential.Settings for arterial faults include fault systems developed in compacting sedimentary basins,faults penetrating zones of active plutonic intrusion that encounter overpressured fluids exsolv
文摘In paper the role of excess pressures in cata- genic processes of the South-Caspian basin (SCB) is considered. The results of the carried out researches taking into account world ex- perience on the given problem allow to con- clude, that SCB (mainly its deep-water part), as well as a number of other basins of the world with overpressures, is characterized by retarda- tion of processes cracking of kerogen and oil, and also reaction of transformation of clay minerals. Periodic intensification of these pro- cesses can provoke development of diapirs and mud volcanoes, which are the centers of pulse unloading of a hydrocarbon products from sys- tem. The conclusion about high prospects of revealing of hydrocarbon accumulations in deep buried deposits in overpressured basins is made.
文摘Growth of ln0.52Al0.48As epitaxial layers on lnP(100) substrates by molecular beam epitaxy at a wide range of arsenic overpressures (V/III flux ratios from 30 to 300) has been carried out. Analysis performed using low-temperature photoluminescence (PL) and double-axis X-ray diffraction (XRD) shows a strong and prominent dependence of the PL and XRD linewidths on the V/III flux ratio. Under our growth conditions, both the PL and XRD linewidths exhibit a minimum point at a V/III flux ratio of 150 which corresponds to a maximum in the PL intensity and XRD intensity ratio. Flux ratios exceeding 150 result in an increase in both the PL and XRD linewidths corresponding to a reduction in their associated intensities. Room temperature Raman scattering measurements show a narrowing in the lnAs-like and AlAs-like longitudinal-optic (LO)phonon linewidths which broaden at high flux ratios, while the LO phonon frequencies exhibit a gradual reduction as the flux ratio is increased. PL spectra taken at increasing temperatures show a quenching of the main emission peak followed by the evolution of a broad lower energy emission which is possibly associated with deep lying centres. This effect is more prominent in samples grown at lower V/III flux ratios. Hall effect measurements show a gradual reduction in the mobility in correspondence to an increase in the electron concentration as the flux ratio is increased.
基金supported by the Important National Science & Technology Specific Projects (Grant No.2008ZX05001)Scientific Development Projects of Petrochina Company Limited (Grant No.2008B-0100)+2 种基金the Doctoral Education Program Fund of Ministry of Education,China (Grant No.20060491505)American Association of Petroleum Geologists Grants-in-Aid Foundation ProgramNational Natural Science Foundation of China (Grant Nos.40739904,40902039)
文摘Carbonate cemented zones are normally adjacent to the top overpressured surface in the central Junggar Basin,NW China.Stable carbon and oxygen isotopic compositions and petrological investigations of carbonate cements in the carbonate cemented zones indicate that:(1) carbonate cements are composed dominantly of ferrocalcite,ferroan dolomite,and ankerite;(2) carbonate cements are formed under a high temperature circumstance in the subsurface,and organic fluid migration has an important effect on the formation of them;and(3) carbon and oxygen ions in the carbonate cements migrate from the underlying overpressured system.This suggests that the occurrence of carbonate cemented zones in this region results from multiple phases of organic fluid expulsion out of the overpressure compartment through geological time.This study provides a plausible mechanism of the formation of carbonate cemented zones adjacent to the top overpressured surface in the clastic sedimentary basins,and has an important implication for understanding the internal correlation between the formation of carbonate cemented zones adjacent to top overpressured surface and geofluids expulsion out of overpressured system.
基金supported by National Science and Technology Major Project of China(Grant No.2011ZX05023-004)
文摘The Dongfang 13-1 is located in the diapiric structure belt of the Yinggehai Basin. The formation pressure of its main gas res- ervoir in the Miocene Huangliu Formation is up to 54.6 MPa （pressure coefficient=l.91） and the temperature is as high as 143°C （geothermal gradient 4.36°C/100 m）, indicating that it is a typical high-temperature and overpressured gas reservoir. The natural gas is interpreted to be coal-type gas derived from the Miocene mature source rocks containing type Ⅱ2-Ⅲ kero- gens as evidenced by high dryness index of up to 0.98 and heavy carbon isotopes, i.e., the δ13C2 ranging from -30.76%o to -37.52%o and δ13C2 ranging from -25.02%o to -25.62%o. The high temperature and overpressured Miocene petroleum system is related mainly to diapir in the Yinggehai Basin and contains more pore water in the overpressured reservoirs due to under- compaction process. The experimental and calculated results show that the solubility of natural gas in formation water is as high as 10.5 m3/m3 under the temperature and pressure conditions of the Sanya Formation, indicating that at least part of the gas may migrate in the form of water-soluble phase. Meanwhile, the abundant gas source in the Basin makes it possible for the rapid saturation of natural gas in formation water and exsolution of soluble gas. Therefore, the main elements controlling formation of the Dongfang 13-1 gas pool include that （1） the diapir activities and accompanying changes in temperature and pressure accelerate the water-soluble gas exsolution and release a lot of free gas; （2） submarine fan fine sandstone in the Huangliu Formation provides good gas-water segregation and accumulation space; and （3） the overlying overpressured mud rocks act as effective caps. The accumulation mechanism reveals that the high temperatural and high pressure structure belt near the diapir structures has a good potential for large and medium-sized gas field exploration.
基金the projects the National Natural Science Foundation of China (Nos. 91028009, 41476032 and 40806019)the Special Foundation for State Major Basic Research Program of China (No. 2011ZX05025-0020-020-03)
文摘This study examined the geochemical features of pore water in the diapiric area of the Yinggehai Basin, northwestern South China Sea, and illuminated the origin and evolution of basin fluids. Pore water with low salinity occurs in marine sediments in the diapiric area even without meteoric water infiltration. The presence of low-salinity water within deep, overpressured compartments is assumed to be due to smectite-illite transformation. Howerver, in shallow portions（less than 2 000 m） of diapiric areas with normal pressure, pore water has a much wider variation and much lower salinity than that in the overpressured intervals. Its total dissolved solid（TDS） content is ~5 336 to 35 939 mg/L. Moreover, smectite and chlorite content sharply decreases as kaolinite and illite content increase in shallower intervals. The geochemical variation of pore water in diapiric structures indicates the expulsion of low-salinity, overpressured fluids along vertical faults. Strong injection of hot fluids from deep overpressured sediments results in rapid clay mineral transformation in shallow reservoirs. Consequently, fluid mixing due to fluid expulsion from deeper overpressured deposits leads to variation in salinity and ionic composition as well as some diagenetic reactions. This includes transformation of clay minerals caused by the higher temperatur of deeper hot fluids, e.g., the transfromation of smectite to illite and chlorite to kaolinite. Therefore, variations in salinity and ionic compositions in various pressured systems provide a clue to flow pathways and associated diagenetic reactions.
基金This research was supported by the National Natural Science Foundation of China(grants 401 25008 and 40238059).
文摘The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on petroleum accumulation. (1) The overpressured fluid flow has enhanced the maturation of shallow-buried source rocks, which has caused the source rocks that would have remained immature under the conduction background to be mature for hydrocarbon generation. As a result, the overpressured fluid flow has increased the volume and interval of mature source rocks. (2) The overpressured fluid flow has strong extraction effects on the immature or low-mature source rocks in the shallow parts. This has increased, to some extent, the expulsion efficiency of the source rocks. More importantly, the extraction effects have strongly limited the effectiveness of biomarker parameters from oil and condensate in reflecting the source and maturity of the oil and gas. (3) The flow has caused the sandstones in the shallow parts to get into the late diagenesis stage, and significantly reduced the porosity and permeability of the sandstones. This study confirms that even in sedimentary basins in which no topography-driven groundwater flow systems have ever developed, the cross-formation migration of overpressured fluids and the resultant energy conduction and material exchange can significantly affect the thermal regime, source rock maturation and sandstone diagenesis. As a result, the effects of overpressured fluid flow must be taken into account in analyzing the mechanism of petroleum accumulation.
基金the 973 Project (Grant No. 2001CB209103)the National Natural Science Foundation of China (Grant No. 42038059)the Key Science Research Project of Chinese Ministry of Education (Grant No. 10419)
文摘Based on the analyses of generation, migration and accumulation of oil and gas in the structures of Kela 1, Kela 2 and Kela 3 in Kasangtuokai anticlinal belt using a series of geological and geochemical evidence, this paper proposes that the rapid rate of hydrocarbon generation, main drain path for over-pressured fluid flow and converging conduit system are indispensable conditions for the rapid, late-stage gas accumulation in the Kelasu thrust belt in the Kuqa depression. Due to structural over-lapping and the resultant rapid burial, the maturity of the source rocks had been increased rapidly from 1.3 to 2.5% Ro within 2.3 Ma, with an average rate of Ro increase up to 0.539% Ro/Ma. The rapid matura-tion of the source rocks had provided sufficient gases for late-stage gas accumulation. The kelasu structural belt has a variety of faults, but only the fault that related with fault propagation fold and cut through the gypsiferous mudstone cap could act as the main path for overpressured fluid release and then for fast gas accumulation in low fluid potential area. All the evidence from surface structure map, seismic profile explanation, authigenic kaolinite and reservoir property demonstrates that the main drain path related with faults for overpressured fluid and the converging conduit system are the key point for the formation of the giant Kela 2 gas field. By contrast, the Kela 1 and Kela 3 structures lo-cated on both sides of Kela 2 structure, are not favourable for gas accumulation due to lacking con-verging conduit system.
基金Project jointly supported by the Ministry of Science and Technology of China (Grant No. 95-Pre-39)the National Natural Science Foundation of China (Grant No. 49732005) A Hundred Excellent Researchers Foundation from the Ministry of Land and Resou
文摘The conduit system of heat fluids in diapiric belt of Yinggehai basin is dominantly vertical faults and fractures . Detailed research on the formation mechanism and their occurrence features shows that the faults and fractures can be classified into three types: intrastratal dispersive hydrofracture, puncturing fault and upwarping-extensional fault. The development of the fault and fracture system not only resulted in the changes of the temperature and pressure fields in the basin, but also affected the hydrocarbon migration in the overpressured system. These faults and fractures constituted the main pathways for vertical hydrocarbon migration, and opening and closing intermittently led to episodic expulsion of overpressured fluid compartment. Thus there formed the pool-forming model of multi-source mixing and ploy-stage migration and accumulation for hydrocarbons in the Yinggehai basin.
