During the process that implant materials are used for bone replacement,the cell responses to implant materials determine the long-term stability of bone replacement.The microstructure of implant materials is consider...During the process that implant materials are used for bone replacement,the cell responses to implant materials determine the long-term stability of bone replacement.The microstructure of implant materials is considered as a critical factor that influences the cell responses.Carbon/Carbon composites（C/C composites） are novel implant materials,but there are few reports on the effect of their microstructure,especially the carbon matrixes and holes,on cell behavior.In this paper,C/C composites with different carbon matrixes are prepared by chemical vapor infiltration and pressure impregnation carbonization technique,respectively.The structure of holes is analyzed.The cell responses to C/C composites with different carbon matrixes are evaluated with MG63 osteoblast-like cells.The morphologies of MG63 osteoblast-like cells on the surface of C/C composites,especially in the holes are assessed by scanning electron microscope,and cell proliferation behavior is evaluated by 3-[4,5-dimethylthiozol-2-yl]-2,5-diphenyltetrazolium bromide（MTT） assay. The results show that MG63 osteoblast-like cells have a lamellar morphology with similar sizes and spreading areas as well as the same proliferation behaviors for C/C composites with different carbon matrixes.Carbon matrix shows unapparent influence on the cell growth behavior.Besides,MG63 osteoblast-like cells have various interactions with the holes of C/C composites.The cells stride over the holes with 6～8μm in size,and connect with each other or grow along the curvature wall of the holes with a size of 30-40μm;the cells present three-dimensional morphologies inside the holes and display circular shapes along the ridge of the holes.Diverse cell-material interactions are found according to the size and position of the holes,which provides theoretical foundation for the microstructure design of clinical C/C composites.展开更多
The objective of this study was to investigate the effect of a new combined micro/nanoscale implant surface feature on osteoblasts＇ behaviors including cell morphology, adhesion, proliferation, differentiation, and m...The objective of this study was to investigate the effect of a new combined micro/nanoscale implant surface feature on osteoblasts＇ behaviors including cell morphology, adhesion, proliferation, differentiation, and mineralization in vitro. A new micro/nano-hybrid topography surface was fabricated on commercial pure titanium（Cp Ti） by a two-step sandblasted acid-etching and subsequent alkali-and heattreatment（SA-AH）. The conventional sandblasted/acid-etching（SA） treatment and alkali and heat（AH） treatment were also carried out on the Cp Ti as controls. Surface microstructures of the Ti disc samples were assessed by scanning electron microscopy（SEM）. The neonatal rat calvaria-derived osteoblasts were seeded on these discs and the initial cell morphology was evaluated by SEM and immunofluorescence. Initial adhesion of the cells was then assayed by DAPI staining at 1, 2, and 4 h after seeding. The Cell Counting Kit-8（CCact K8） assay, gene expression of osteoblastic markers（ALP, Col 1, OCN, BSP, OSX, Cbfα1） and Alizarin Red S staining assays were monitored respectively for cell proliferations, differentiation and mineralization. The results show significant differences in osteoblast＇s behaviors on the four kinds of Ti surfaces. Compared with Cp Ti surface, the SA and AH treatment can significantly promote cell adhesion, differentiation and mineralization of osteoblasts. In particular, the combined SA and AH treatments exhibit synergistic effects in comparison with the treatment of SA and AH individually, and are more favorable for stimulating a series of osteogenous responses from cell adhesion to mineralization of osteoblasts. In summary, this study provides some new evidence that the integrated micro/nanostructure on the Cp Ti surface may promote bone osseointegration between the Ti implantbone interfaces in vitro.展开更多
基金supported by National Natural Science Foundation of China(Grant No.50972120,Grant No.50902111 and Grant No. 51072107)"111"Project of China(Grant No.B08040)
文摘During the process that implant materials are used for bone replacement,the cell responses to implant materials determine the long-term stability of bone replacement.The microstructure of implant materials is considered as a critical factor that influences the cell responses.Carbon/Carbon composites（C/C composites） are novel implant materials,but there are few reports on the effect of their microstructure,especially the carbon matrixes and holes,on cell behavior.In this paper,C/C composites with different carbon matrixes are prepared by chemical vapor infiltration and pressure impregnation carbonization technique,respectively.The structure of holes is analyzed.The cell responses to C/C composites with different carbon matrixes are evaluated with MG63 osteoblast-like cells.The morphologies of MG63 osteoblast-like cells on the surface of C/C composites,especially in the holes are assessed by scanning electron microscope,and cell proliferation behavior is evaluated by 3-[4,5-dimethylthiozol-2-yl]-2,5-diphenyltetrazolium bromide（MTT） assay. The results show that MG63 osteoblast-like cells have a lamellar morphology with similar sizes and spreading areas as well as the same proliferation behaviors for C/C composites with different carbon matrixes.Carbon matrix shows unapparent influence on the cell growth behavior.Besides,MG63 osteoblast-like cells have various interactions with the holes of C/C composites.The cells stride over the holes with 6～8μm in size,and connect with each other or grow along the curvature wall of the holes with a size of 30-40μm;the cells present three-dimensional morphologies inside the holes and display circular shapes along the ridge of the holes.Diverse cell-material interactions are found according to the size and position of the holes,which provides theoretical foundation for the microstructure design of clinical C/C composites.
基金Funded by the Natural Science Fundation of Zhejiang Province(Nos.Y2080956 and Y4110169)the National Natural Science Foundation of China(Nos.51102211,and 20934003)the Science and Technique Plans of Wenzhou City(Nos.Y20070093 and H20100076)
文摘The objective of this study was to investigate the effect of a new combined micro/nanoscale implant surface feature on osteoblasts＇ behaviors including cell morphology, adhesion, proliferation, differentiation, and mineralization in vitro. A new micro/nano-hybrid topography surface was fabricated on commercial pure titanium（Cp Ti） by a two-step sandblasted acid-etching and subsequent alkali-and heattreatment（SA-AH）. The conventional sandblasted/acid-etching（SA） treatment and alkali and heat（AH） treatment were also carried out on the Cp Ti as controls. Surface microstructures of the Ti disc samples were assessed by scanning electron microscopy（SEM）. The neonatal rat calvaria-derived osteoblasts were seeded on these discs and the initial cell morphology was evaluated by SEM and immunofluorescence. Initial adhesion of the cells was then assayed by DAPI staining at 1, 2, and 4 h after seeding. The Cell Counting Kit-8（CCact K8） assay, gene expression of osteoblastic markers（ALP, Col 1, OCN, BSP, OSX, Cbfα1） and Alizarin Red S staining assays were monitored respectively for cell proliferations, differentiation and mineralization. The results show significant differences in osteoblast＇s behaviors on the four kinds of Ti surfaces. Compared with Cp Ti surface, the SA and AH treatment can significantly promote cell adhesion, differentiation and mineralization of osteoblasts. In particular, the combined SA and AH treatments exhibit synergistic effects in comparison with the treatment of SA and AH individually, and are more favorable for stimulating a series of osteogenous responses from cell adhesion to mineralization of osteoblasts. In summary, this study provides some new evidence that the integrated micro/nanostructure on the Cp Ti surface may promote bone osseointegration between the Ti implantbone interfaces in vitro.
