Most lost-foam casting processes involve non-equilibrium solidification dominated by kinetic factors, while construction of a common dynamic solidification curve is based on pure thermodynamics, not applicable for ana...Most lost-foam casting processes involve non-equilibrium solidification dominated by kinetic factors, while construction of a common dynamic solidification curve is based on pure thermodynamics, not applicable for analyses and research of non-equilibrium macro-solidification processes, and the construction mode can not be applied to nonequilibrium solidification process. In this study, the construction of the dynamic solidification curve(DSC) for the nonequilibrium macro-solidification process included: a modified method to determine the start temperature of primary austenite precipitation(T_(AL)) and the start temperature of eutectic solidification(T_(ES)); double curves method to determine the temperature of the dendrite coherency point of primary austenite(T-(AC)) and the temperature of eutectic cells collision point(T_(EC)); the "technical solidus" method to determine the end temperature of eutectic reaction(T_(EN)). For this purpose, a comparative testing of the non-equilibrium solidification temperature fields in lost-foam casting and green sand mold casting hypoeutectic gray iron was carried out. The thermal analysis results were used to construct the DSCs of both these casting methods under non-equilibrium solidification conditions. The results show that the transformation rate of non-equilibrium solidification in hypoeutectic gray cast iron is greater than that of equilibrium solidification. The eutectic solidification region presents a typical mushy solidification mode. The results also indicate that the primary austenite precipitation zone of lost-foam casting is slightly larger than that of green sand casting. At the same time, the solid fraction(f_s) of the dendrite coherency points in lost-foam casting is greater than that in the green sand casting. Therefore, from these two points, lost-foam casting is more preferable for reduction of shrinkage and mechanical burntin sand tendency of the hypoeutectic gray cast iron. Due to the fact that the solidification process(from the surface to center) at prim展开更多
A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/...A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/mixing behavior of actual trays in a distillation column.Com-parison is made among the computed results of the start-up time and the dynamic response time bythe proposed and five other typical models.It is found that the computed time for both dynamicprocesses is longer by the model which considers any flow/mixing pattern than by the model withoutsuch concern.The inertia effect of flow/mixing seems to be important and can not be ignored inmodeling the transient process of distillation.The proposed model,which is believed to be suitableto large column,seems somewhat useful in predicting industrial distillation dynamics.展开更多
The dynamic process of non-equilibrium grain boundary segregation of traceboron in Fe-40 percent Ni alloy during cooling and the effect of cooling rate were investigated byboron tracking autoradiography technique. The...The dynamic process of non-equilibrium grain boundary segregation of traceboron in Fe-40 percent Ni alloy during cooling and the effect of cooling rate were investigated byboron tracking autoradiography technique. The results indicate that during cooling process, theamount of segregated boron on grain boundary firstly increases fast, then enters a comparativelyeven increasing stage and increases rapidly again at the third stage. The details of each stagevaried with cooling rate are explained. When the segregation develops to a certain degree, thesegregated boron atoms transform from solute status to precipitate status.展开更多
基金financially supported by the National Development and Reform Commission(2010-324)
文摘Most lost-foam casting processes involve non-equilibrium solidification dominated by kinetic factors, while construction of a common dynamic solidification curve is based on pure thermodynamics, not applicable for analyses and research of non-equilibrium macro-solidification processes, and the construction mode can not be applied to nonequilibrium solidification process. In this study, the construction of the dynamic solidification curve(DSC) for the nonequilibrium macro-solidification process included: a modified method to determine the start temperature of primary austenite precipitation(T_(AL)) and the start temperature of eutectic solidification(T_(ES)); double curves method to determine the temperature of the dendrite coherency point of primary austenite(T-(AC)) and the temperature of eutectic cells collision point(T_(EC)); the "technical solidus" method to determine the end temperature of eutectic reaction(T_(EN)). For this purpose, a comparative testing of the non-equilibrium solidification temperature fields in lost-foam casting and green sand mold casting hypoeutectic gray iron was carried out. The thermal analysis results were used to construct the DSCs of both these casting methods under non-equilibrium solidification conditions. The results show that the transformation rate of non-equilibrium solidification in hypoeutectic gray cast iron is greater than that of equilibrium solidification. The eutectic solidification region presents a typical mushy solidification mode. The results also indicate that the primary austenite precipitation zone of lost-foam casting is slightly larger than that of green sand casting. At the same time, the solid fraction(f_s) of the dendrite coherency points in lost-foam casting is greater than that in the green sand casting. Therefore, from these two points, lost-foam casting is more preferable for reduction of shrinkage and mechanical burntin sand tendency of the hypoeutectic gray cast iron. Due to the fact that the solidification process(from the surface to center) at prim
文摘A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/mixing behavior of actual trays in a distillation column.Com-parison is made among the computed results of the start-up time and the dynamic response time bythe proposed and five other typical models.It is found that the computed time for both dynamicprocesses is longer by the model which considers any flow/mixing pattern than by the model withoutsuch concern.The inertia effect of flow/mixing seems to be important and can not be ignored inmodeling the transient process of distillation.The proposed model,which is believed to be suitableto large column,seems somewhat useful in predicting industrial distillation dynamics.
基金This work was financially supported by the Projects of Development of the State Key Fundamental Research(National 973 Project)(No.G19980601507).]
文摘The dynamic process of non-equilibrium grain boundary segregation of traceboron in Fe-40 percent Ni alloy during cooling and the effect of cooling rate were investigated byboron tracking autoradiography technique. The results indicate that during cooling process, theamount of segregated boron on grain boundary firstly increases fast, then enters a comparativelyeven increasing stage and increases rapidly again at the third stage. The details of each stagevaried with cooling rate are explained. When the segregation develops to a certain degree, thesegregated boron atoms transform from solute status to precipitate status.
