A multitracer-gas method was proposed to study the secondary air(SA)mixing along the bed height in a circulating fluidized bed(CFB)using carbon monoxide(CO),oxygen(O_(2)),and carbon dioxide(CO_(2))as tracer gases.Expe...A multitracer-gas method was proposed to study the secondary air(SA)mixing along the bed height in a circulating fluidized bed(CFB)using carbon monoxide(CO),oxygen(O_(2)),and carbon dioxide(CO_(2))as tracer gases.Experiments were carried out on a cold CFB test rig with a cross-section of 0.42 m×0.73 m and a height of 5.50 m.The effects of superficial velocity,SA ratio,bed inventory,and particle diameter on the SA mixing were investigated.The results indicate that there are some differences in the measurement results obtained using different tracer gases,wherein the deviation between CO and CO_(2) ranges from 42%to 66%and that between O_(2) and CO_(2) ranges from 45%to 71%in the lower part of the fluidized bed.However,these differences became less pronounced as the bed height increased.Besides,the high solid concentration and fine particle diameter in the CFB may weaken the difference.The measurement results of different tracer gases show the same trends under the variation of operating parameters.Increasing superficial velocity and SA ratio and decreasing particle diameter result in better mixing of the SA.The effect of bed inventory on SA mixing is not monotonic.展开更多
The conventional poststack inversion uses standard recursion formulas to obtain impedance in a single trace.It cannot allow for lateral regularization.In this paper,ID edge-preserving smoothing(EPS)fi lter is extended...The conventional poststack inversion uses standard recursion formulas to obtain impedance in a single trace.It cannot allow for lateral regularization.In this paper,ID edge-preserving smoothing(EPS)fi lter is extended to 2D/3D for setting precondition of impedance model in impedance inversion.The EPS filter incorporates a priori knowledge into the seismic inversion.The a priori knowledge incorporated from EPS filter preconditioning relates to the blocky features of the impedance model,which makes the formation interfaces and geological edges precise and keeps the inversion procedure robust.Then,the proposed method is performed on two 2D models to show its feasibility and stability.Last,the proposed method is performed on a real 3D seismic work area from Southwest China to predict reef reservoirs in practice.展开更多
基金the Key Project of the National Research Program of China(2020YFB0606201)。
文摘A multitracer-gas method was proposed to study the secondary air(SA)mixing along the bed height in a circulating fluidized bed(CFB)using carbon monoxide(CO),oxygen(O_(2)),and carbon dioxide(CO_(2))as tracer gases.Experiments were carried out on a cold CFB test rig with a cross-section of 0.42 m×0.73 m and a height of 5.50 m.The effects of superficial velocity,SA ratio,bed inventory,and particle diameter on the SA mixing were investigated.The results indicate that there are some differences in the measurement results obtained using different tracer gases,wherein the deviation between CO and CO_(2) ranges from 42%to 66%and that between O_(2) and CO_(2) ranges from 45%to 71%in the lower part of the fluidized bed.However,these differences became less pronounced as the bed height increased.Besides,the high solid concentration and fine particle diameter in the CFB may weaken the difference.The measurement results of different tracer gases show the same trends under the variation of operating parameters.Increasing superficial velocity and SA ratio and decreasing particle diameter result in better mixing of the SA.The effect of bed inventory on SA mixing is not monotonic.
基金The National Key S&T Special Projects (No. 2017ZX05008004-008)the National Natural Science Foundation of China (No. 41874146)+2 种基金the National Natural Science Foundation of China (No. 41704134)the Innovation Team of Youth Scientific and Technological in Southwest Petroleum University (No. 2017CXTD08)the Initiative Projects for Ph.Din China West Normal University (No. 19E063)
文摘The conventional poststack inversion uses standard recursion formulas to obtain impedance in a single trace.It cannot allow for lateral regularization.In this paper,ID edge-preserving smoothing(EPS)fi lter is extended to 2D/3D for setting precondition of impedance model in impedance inversion.The EPS filter incorporates a priori knowledge into the seismic inversion.The a priori knowledge incorporated from EPS filter preconditioning relates to the blocky features of the impedance model,which makes the formation interfaces and geological edges precise and keeps the inversion procedure robust.Then,the proposed method is performed on two 2D models to show its feasibility and stability.Last,the proposed method is performed on a real 3D seismic work area from Southwest China to predict reef reservoirs in practice.
