In industry,multiple hearth furnaces are used for the thermal treatment of particulate material.The current contribution concentrates on the experimental analysis of particle mechanics for a batch-operated single floo...In industry,multiple hearth furnaces are used for the thermal treatment of particulate material.The current contribution concentrates on the experimental analysis of particle mechanics for a batch-operated single floor of a multiple hearth furnace.The particles are agitated on the circular floor by a single,rotating rabble arm equipped with three flat rabble blades of 10 mm thickness.The blade angle,defined as the angle,which the blade is inclined against the tangential direction,is varied from 0°to 90°.A single layer of spherical polyoxymethylene(POM)particles with three different diameters(5,10 and 20 mm)is placed on the floor.To analyze the results,two parameters have been extracted from image analysis when the bed of particles is agitated,first,the area not covered by particles and second,the frequency distribution of the mean distance among the particles.The particle free surface area increases with the inclination of the blades.The evolution of the particle free surface area differs for the different particle diameters.In general,the maximum particle free area for all blade angles is the largest for the 5 mm particles followed by the 20 mm particles.For the 10 mm particles,the particle free surface area starts for a blade angle of 0°at larger values than for the 20 mm particles but the values fall below the values for the 20 mm particles for larger blade angles.The reason for this behavior is discussed in detail.The mean distance among the particles is a parameter characterizing the length scales dominating the effects on the floor.The frequency distribution of the mean distance among particles provides infor-mation about the morphology of the particle bulk,for example,whether the free surface area is inter-spersed with particles.展开更多
The slurry pump is the key component of a dredger. Solid particles have strong influence on the performance of a slurry pump. The movement of solid particles in a centrifugal impeller was studied using particle image ...The slurry pump is the key component of a dredger. Solid particles have strong influence on the performance of a slurry pump. The movement of solid particles in a centrifugal impeller was studied using particle image velocimetry(PIV) measurement. The experiments were conducted in a dredging pump model at Hohai University. Some transparent glass spheres with diameter of 0. 2-0. 4 mm were used as solid particles. The concentration and relative velocities of the particles were analyzed to investigate the particle trajectory. The results show that the concentration of the particles on the pressure surfaces of the blades is higher than on the suction surfaces,and the particles tend to move towards the suction surfaces. Moreover,the particles have faster relative velocities than the liquid phase through the flow channels of the impeller.展开更多
We propose an extended lattice gas model with different maximum velocities to simulate pedestrian counter flow by considering the subconscious behaviour of walkers. Four types of walkers including faster right walkers...We propose an extended lattice gas model with different maximum velocities to simulate pedestrian counter flow by considering the subconscious behaviour of walkers. Four types of walkers including faster right walkers, slower right walkers, faster left walkers and slower left walkers are involved in the simulation. The simulation results show that our model can capture some essential features of pedestrian counter flows, such as the lane formation, segregation effect and phase separation at higher densities. We also find that the subconscious effect can reduce the occurrence of jam cluster evidently compared with the ease of un-subeonscious effect. At large maximum velocity, the critical density corresponding to the maximum flow rate of the fundamental diagram is in good agreement with the empirical results.展开更多
The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-su...The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-sufficiency, and by “Special Nature”, gravitational and two other properties of matter, “tied” to the “Eternal Movement” and completely dependent on it. Carriers of key properties of a “Special Nature” have been established: “0”-DE particles and “3”-DM particles (UDM). The unity of their inherent “motionally-gravitational” properties and the peculiarity of the relationship between “motion” and “gravity” are revealed: the higher the intensity of “Eternal Motion”, the stronger the gravitational properties of matter are manifested (and vice versa). The relationship of “time” with the “vibration frequency” and the “mass” of photons with the “degree of bonding and deformation properties of the field” is shown. The maximum level of gravity has been determined, which allows Nature to successfully create the Universe: such a landmark is the proximity to the property of the Primary Source—the “pure graviton” of the OSP space, the most powerful “motionally-gravitational” particle of the Universe. The reasons for the emergence of such an identity of the gravitational properties of particles with the indicators of a “pure graviton” are established: for “0”-DE particles, this is the acquisition of the function of “freedom of movement”;for “3”-DM particles (UDM), the creation of a special structure—a “double field” (“Main” and “Small”). The presence in the “double field” of specific “tools” for the creation of the worlds of the Universe—gravitational “waves” gives rise to impulses (shocks) of varying intensity and shape. A list of functions performed by “waves” in the “Main” and “Small” fields has been compiled. The specific conditions for the formation of “UDM Streams”, their transform展开更多
为了解决乙二醇回收(MEG Reclamation Unit, MRU)系统中传统换热器存在的换热效率不高、体积大占空间、易结垢等问题,分别针对全焊接板式换热器、螺旋板式换热器的内部液固两相流开展数值模拟研究,重点关注换热器内盐颗粒的运动与分布规...为了解决乙二醇回收(MEG Reclamation Unit, MRU)系统中传统换热器存在的换热效率不高、体积大占空间、易结垢等问题,分别针对全焊接板式换热器、螺旋板式换热器的内部液固两相流开展数值模拟研究,重点关注换热器内盐颗粒的运动与分布规律,并对可能发生的颗粒沉积甚至堵塞换热器的状况进行预测。模拟研究结果显示:全焊接板式换热器内由于凹槽(肋片)和凸台构成的波纹结构产生扰流作用,MEG循环液和盐颗粒在板对流道内的流场分布不均匀;螺旋板式换热器内流道光滑,无扰流结构和局部流通面积的突变,盐颗粒在其中的运动分布状态均匀,有利于随MEG贫液排出换热器;螺旋板式换热器作为MRU系统循环加热器的效果更好。研究结果可对MRU系统循环加热器的选型和参数设计提供理论参考。展开更多
基金funded by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)-Project-ID 422037413-TRR 287.
文摘In industry,multiple hearth furnaces are used for the thermal treatment of particulate material.The current contribution concentrates on the experimental analysis of particle mechanics for a batch-operated single floor of a multiple hearth furnace.The particles are agitated on the circular floor by a single,rotating rabble arm equipped with three flat rabble blades of 10 mm thickness.The blade angle,defined as the angle,which the blade is inclined against the tangential direction,is varied from 0°to 90°.A single layer of spherical polyoxymethylene(POM)particles with three different diameters(5,10 and 20 mm)is placed on the floor.To analyze the results,two parameters have been extracted from image analysis when the bed of particles is agitated,first,the area not covered by particles and second,the frequency distribution of the mean distance among the particles.The particle free surface area increases with the inclination of the blades.The evolution of the particle free surface area differs for the different particle diameters.In general,the maximum particle free area for all blade angles is the largest for the 5 mm particles followed by the 20 mm particles.For the 10 mm particles,the particle free surface area starts for a blade angle of 0°at larger values than for the 20 mm particles but the values fall below the values for the 20 mm particles for larger blade angles.The reason for this behavior is discussed in detail.The mean distance among the particles is a parameter characterizing the length scales dominating the effects on the floor.The frequency distribution of the mean distance among particles provides infor-mation about the morphology of the particle bulk,for example,whether the free surface area is inter-spersed with particles.
文摘The slurry pump is the key component of a dredger. Solid particles have strong influence on the performance of a slurry pump. The movement of solid particles in a centrifugal impeller was studied using particle image velocimetry(PIV) measurement. The experiments were conducted in a dredging pump model at Hohai University. Some transparent glass spheres with diameter of 0. 2-0. 4 mm were used as solid particles. The concentration and relative velocities of the particles were analyzed to investigate the particle trajectory. The results show that the concentration of the particles on the pressure surfaces of the blades is higher than on the suction surfaces,and the particles tend to move towards the suction surfaces. Moreover,the particles have faster relative velocities than the liquid phase through the flow channels of the impeller.
基金Supported by the National Basic Research Programme of China under Grant No 2006CB705500, the National Natural Science Foundation of China under Grant Nos 10532060 and 10562001, and the Shanghai Leading Academic Discipline Project under Grant No Y0103.
文摘We propose an extended lattice gas model with different maximum velocities to simulate pedestrian counter flow by considering the subconscious behaviour of walkers. Four types of walkers including faster right walkers, slower right walkers, faster left walkers and slower left walkers are involved in the simulation. The simulation results show that our model can capture some essential features of pedestrian counter flows, such as the lane formation, segregation effect and phase separation at higher densities. We also find that the subconscious effect can reduce the occurrence of jam cluster evidently compared with the ease of un-subeonscious effect. At large maximum velocity, the critical density corresponding to the maximum flow rate of the fundamental diagram is in good agreement with the empirical results.
文摘The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-sufficiency, and by “Special Nature”, gravitational and two other properties of matter, “tied” to the “Eternal Movement” and completely dependent on it. Carriers of key properties of a “Special Nature” have been established: “0”-DE particles and “3”-DM particles (UDM). The unity of their inherent “motionally-gravitational” properties and the peculiarity of the relationship between “motion” and “gravity” are revealed: the higher the intensity of “Eternal Motion”, the stronger the gravitational properties of matter are manifested (and vice versa). The relationship of “time” with the “vibration frequency” and the “mass” of photons with the “degree of bonding and deformation properties of the field” is shown. The maximum level of gravity has been determined, which allows Nature to successfully create the Universe: such a landmark is the proximity to the property of the Primary Source—the “pure graviton” of the OSP space, the most powerful “motionally-gravitational” particle of the Universe. The reasons for the emergence of such an identity of the gravitational properties of particles with the indicators of a “pure graviton” are established: for “0”-DE particles, this is the acquisition of the function of “freedom of movement”;for “3”-DM particles (UDM), the creation of a special structure—a “double field” (“Main” and “Small”). The presence in the “double field” of specific “tools” for the creation of the worlds of the Universe—gravitational “waves” gives rise to impulses (shocks) of varying intensity and shape. A list of functions performed by “waves” in the “Main” and “Small” fields has been compiled. The specific conditions for the formation of “UDM Streams”, their transform
文摘为了解决乙二醇回收(MEG Reclamation Unit, MRU)系统中传统换热器存在的换热效率不高、体积大占空间、易结垢等问题,分别针对全焊接板式换热器、螺旋板式换热器的内部液固两相流开展数值模拟研究,重点关注换热器内盐颗粒的运动与分布规律,并对可能发生的颗粒沉积甚至堵塞换热器的状况进行预测。模拟研究结果显示:全焊接板式换热器内由于凹槽(肋片)和凸台构成的波纹结构产生扰流作用,MEG循环液和盐颗粒在板对流道内的流场分布不均匀;螺旋板式换热器内流道光滑,无扰流结构和局部流通面积的突变,盐颗粒在其中的运动分布状态均匀,有利于随MEG贫液排出换热器;螺旋板式换热器作为MRU系统循环加热器的效果更好。研究结果可对MRU系统循环加热器的选型和参数设计提供理论参考。
