Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication （MQL）, and nanoparticle jet MQL ...Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication （MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm3, respectively. The speci- fic grinding energy significantly decreased to 32.7 J/mm3 in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were sig- nificantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%, respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%, and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS：, carbon nanotube （CNT）, and ZrO2 nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS2 nanoparticle was only 32.7 J/mm3, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS2 nanoparticle, which indicated its remarkable lubrication effects. Furthermore, the role of MoS2 particles in the grinding surface lubrication at different nanoparticle volume con- centrations was analyzed. MoS2 volume concentrations of 1%, 2%, and 3% were used. Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS2 nanoparticle volume concentration increased. Satisfactory grinding surface lubrication effects were obtained with 2% MoS2 nanoparticle volume concentration.展开更多
为了探究针-板电极电场参数对雾化特性微量润滑磨削性能的影响,通过调节电压幅值和电极间距进行微量润滑平面磨削实验,根据所得雾化锥角、雾滴粒径算术平均值、磨削力及表面粗糙度Ra值进行机理分析。实验结果表明静电雾化微量润滑在高...为了探究针-板电极电场参数对雾化特性微量润滑磨削性能的影响,通过调节电压幅值和电极间距进行微量润滑平面磨削实验,根据所得雾化锥角、雾滴粒径算术平均值、磨削力及表面粗糙度Ra值进行机理分析。实验结果表明静电雾化微量润滑在高压静电场的参与下,液滴荷电后会发生二次甚至多次雾化。随着电压幅值的升高,雾化锥角增大,雾滴的平均粒径减小并扩散均匀,同时润滑液的润滑性能也有所提高。在电压幅值一定,电极间距为160 mm时,获得最优的润滑性能;在电极间距一定,电压幅值为50 k V时,相比于无静电微量润滑,比切向磨削力Ft'、比法向磨削力Fn'及表面粗糙度R_a值,分别减小25.01%、15.08%、22.18%,获得最优的润滑性能。展开更多
基金co-supported by the National Natural Science Foundation of China (No. 51175276)the Qingdao Science and Technology Program of Basic Research Projects (No. 14-2-4-18-jch) of Chinathe Huangdao District Application Science and Technology Project (No. 2014-1-55) of China
文摘Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication （MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm3, respectively. The speci- fic grinding energy significantly decreased to 32.7 J/mm3 in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were sig- nificantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%, respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%, and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS：, carbon nanotube （CNT）, and ZrO2 nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS2 nanoparticle was only 32.7 J/mm3, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS2 nanoparticle, which indicated its remarkable lubrication effects. Furthermore, the role of MoS2 particles in the grinding surface lubrication at different nanoparticle volume con- centrations was analyzed. MoS2 volume concentrations of 1%, 2%, and 3% were used. Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS2 nanoparticle volume concentration increased. Satisfactory grinding surface lubrication effects were obtained with 2% MoS2 nanoparticle volume concentration.
文摘为了探究针-板电极电场参数对雾化特性微量润滑磨削性能的影响,通过调节电压幅值和电极间距进行微量润滑平面磨削实验,根据所得雾化锥角、雾滴粒径算术平均值、磨削力及表面粗糙度Ra值进行机理分析。实验结果表明静电雾化微量润滑在高压静电场的参与下,液滴荷电后会发生二次甚至多次雾化。随着电压幅值的升高,雾化锥角增大,雾滴的平均粒径减小并扩散均匀,同时润滑液的润滑性能也有所提高。在电压幅值一定,电极间距为160 mm时,获得最优的润滑性能;在电极间距一定,电压幅值为50 k V时,相比于无静电微量润滑,比切向磨削力Ft'、比法向磨削力Fn'及表面粗糙度R_a值,分别减小25.01%、15.08%、22.18%,获得最优的润滑性能。
