Ultra-fine titanium carbonitride （TiCN） matrix materials with a grain size less than 1μm were successfully prepared by vacuum microwave sintering. The milling process for raw TiCN particles and the microstructure a...Ultra-fine titanium carbonitride （TiCN） matrix materials with a grain size less than 1μm were successfully prepared by vacuum microwave sintering. The milling process for raw TiCN particles and the microstructure and properties of cermets produced with a composition of 15wt.%WC-17wt.%（Co＋Ni）-9wt.%Mo2C-59wt.%Ti0.TN0.3 and sintered by vacuum microwave were analyzed by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results show that a ball-to-powder mass ratio of 8：1 and a milling time of 50 h provided appropriate conditions for the production of ultra-fine TiCN solid solution powders. The use of vacuum microwave sintering produced cermets with much finer grain and black core structures and higher relative density and hardness than those produced by vacuum sintering technology.展开更多
Hardfacing materials containing YT758 hardmetal particles cemented by Cu-based alloy was deposited on the substrate to produce milling tools by oxy-acetylene flame process. Microstructure and wear properties of the ha...Hardfacing materials containing YT758 hardmetal particles cemented by Cu-based alloy was deposited on the substrate to produce milling tools by oxy-acetylene flame process. Microstructure and wear properties of the hardfacing layers were analyzed by scanning electron microscopy(SEM) and electron dispersion X-ray spectroscopy(EDXS) and wear test. The results show that inter-diffusion zone is found at the interface of YT758/CuZnNi, which promises to improve the bonding strength of YT758/CuZnNi. The wear resistance of YT758/CuZnNi hardfacing layers is higher than that of YG8/CuZnNi hardfacing layers. The working efficiency of the milling tools strengthened by YT758/CuZnNi is approximately 23 times higher than that strengthened by YG8/CuZnNi.展开更多
基金supported by the Hunan Provincial Natural Science Fund for Distinguished Young Scholars of China(No.08JJ1007)the Hunan Provincial Key Science Research Program of China(No.2008GK2009)the Scientific Research Fund of Fujian Provincial Education Department of China(No.JK2009029)
文摘Ultra-fine titanium carbonitride （TiCN） matrix materials with a grain size less than 1μm were successfully prepared by vacuum microwave sintering. The milling process for raw TiCN particles and the microstructure and properties of cermets produced with a composition of 15wt.%WC-17wt.%（Co＋Ni）-9wt.%Mo2C-59wt.%Ti0.TN0.3 and sintered by vacuum microwave were analyzed by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results show that a ball-to-powder mass ratio of 8：1 and a milling time of 50 h provided appropriate conditions for the production of ultra-fine TiCN solid solution powders. The use of vacuum microwave sintering produced cermets with much finer grain and black core structures and higher relative density and hardness than those produced by vacuum sintering technology.
基金Project(Z2000F02) supported by the Natural Science Foundation of Shandong Province , China
文摘Hardfacing materials containing YT758 hardmetal particles cemented by Cu-based alloy was deposited on the substrate to produce milling tools by oxy-acetylene flame process. Microstructure and wear properties of the hardfacing layers were analyzed by scanning electron microscopy(SEM) and electron dispersion X-ray spectroscopy(EDXS) and wear test. The results show that inter-diffusion zone is found at the interface of YT758/CuZnNi, which promises to improve the bonding strength of YT758/CuZnNi. The wear resistance of YT758/CuZnNi hardfacing layers is higher than that of YG8/CuZnNi hardfacing layers. The working efficiency of the milling tools strengthened by YT758/CuZnNi is approximately 23 times higher than that strengthened by YG8/CuZnNi.
