Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The oxidation properties of felt base carbon/carbon composite...Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The oxidation properties of felt base carbon/carbon composites were investigated at different temperatures (773-1173K), and the microstructures of carbon/carbon composites were studied by SEM and X-ray diffraction. The experimental results showed that the inter-laminar distance of (002) plane (d002) deceased while the microcrystalline stack height (Lc) increased. The oxidation rate of felt base carbon/carbon composites was invari-able at certain temperatures. The oxidation mechanism of carbon/carbon composites changed remarkably at the oxidation temperature 973K. At the initial oxidation stage of carbon/carbon composites, carbon matrix was oxidized much more rapidly than carbon felt.展开更多
Al-based composites reinforced with A1-Ti intermetallic compounds/Ti metal hierarchically spherical agents were successfully fabricated by powder metallurgy. This kind of structure produces strongly bonded interfaces ...Al-based composites reinforced with A1-Ti intermetallic compounds/Ti metal hierarchically spherical agents were successfully fabricated by powder metallurgy. This kind of structure produces strongly bonded interfaces as well as soft/hard/soft transition regions between the matrix and reinforced agents, which are beneficial to load transfer during deformation. As expected, the resultant composites exhibit promising mechanical properties at ambient temperature. The underlying mechanism was also discussed in this paper.展开更多
A series of experiments are carried out with selective laser sintering(SLS) for copper,copper-nickel powder matetials.The phenomena of the sintering process is ana-lyzed,the influence of techmological parameters is di...A series of experiments are carried out with selective laser sintering(SLS) for copper,copper-nickel powder matetials.The phenomena of the sintering process is ana-lyzed,the influence of techmological parameters is dis-cussed in detail,By means of SEM with energy spectrum system and X-ray diffraction spectrum,the morphology of the microstructure and the compositions of the different zones are analyzed,the mechanism of the laser sintering metallic powders is preliminarily explored,All those above lay the foundations for the forming metal parts by laser sintering metallic powders.展开更多
文摘Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The oxidation properties of felt base carbon/carbon composites were investigated at different temperatures (773-1173K), and the microstructures of carbon/carbon composites were studied by SEM and X-ray diffraction. The experimental results showed that the inter-laminar distance of (002) plane (d002) deceased while the microcrystalline stack height (Lc) increased. The oxidation rate of felt base carbon/carbon composites was invari-able at certain temperatures. The oxidation mechanism of carbon/carbon composites changed remarkably at the oxidation temperature 973K. At the initial oxidation stage of carbon/carbon composites, carbon matrix was oxidized much more rapidly than carbon felt.
文摘Al-based composites reinforced with A1-Ti intermetallic compounds/Ti metal hierarchically spherical agents were successfully fabricated by powder metallurgy. This kind of structure produces strongly bonded interfaces as well as soft/hard/soft transition regions between the matrix and reinforced agents, which are beneficial to load transfer during deformation. As expected, the resultant composites exhibit promising mechanical properties at ambient temperature. The underlying mechanism was also discussed in this paper.
文摘A series of experiments are carried out with selective laser sintering(SLS) for copper,copper-nickel powder matetials.The phenomena of the sintering process is ana-lyzed,the influence of techmological parameters is dis-cussed in detail,By means of SEM with energy spectrum system and X-ray diffraction spectrum,the morphology of the microstructure and the compositions of the different zones are analyzed,the mechanism of the laser sintering metallic powders is preliminarily explored,All those above lay the foundations for the forming metal parts by laser sintering metallic powders.
