金属飞轮功率密度大,可靠性高,是我国推广飞轮储能技术应用的重要途径。本文综合考虑应力强度、金属疲劳、储能总量、储能密度和加工工艺,依托有限元计算优化金属飞轮设计,以应对不同工况要求。飞轮材料选用35Cr Mo A,设计储能量大于20 ...金属飞轮功率密度大,可靠性高,是我国推广飞轮储能技术应用的重要途径。本文综合考虑应力强度、金属疲劳、储能总量、储能密度和加工工艺,依托有限元计算优化金属飞轮设计,以应对不同工况要求。飞轮材料选用35Cr Mo A,设计储能量大于20 k W·h。频繁充放电飞轮采用4倍安全系数,具备高可靠性;高速待机飞轮以疲劳极限强度作为设计准则,平衡储能量和寿命。计算对比发现,"哑铃"形截面有利于实现轻质量大转动惯量,相同储能量下降低轴承负荷。此外,文章依托模块化设计思想,提出叠层铆合飞轮设计,评估轴孔螺孔应力集中影响。上述讨论为低速大功率金属飞轮进一步设计和量产化提供了有力参考。展开更多
The dramatic temperature-dependence of liquids dynamics has attracted considerable scientific interests and efforts in the past decades, but the physics of which remains elusive. In addition to temperature, some other...The dramatic temperature-dependence of liquids dynamics has attracted considerable scientific interests and efforts in the past decades, but the physics of which remains elusive. In addition to temperature, some other parameters, such as pressure, loading and size, can also tune the liquid dynamics and induce glass transition, which makes the situation more complicated. Here, we performed molecular dynamics simulations for Ni_(50)Zr_(50) bulk liquid and nanodroplet to study the dynamics evolution in the complex multivariate phase space, especially along the isotherm with the change of pressure or droplet size. It is found that the short-time Debye–Waller factor universally determines the long-time relaxation dynamics no matter how the temperature, pressure or size changes. The basic correlation even holds at the local atomic scale. This finding provides general understanding of the microscopic mechanism of dynamic arrest and dynamic heterogeneity.展开更多
Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great signifi...Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great significance to reveal the thermal response mechanism of EPMWM based on its complex structural effects.In the present work,virtual manufacturing technology(VMT)was developed to restore the physics-based 3D model of EPMWM.On this basis,the transient thermal analysis is carried out to explore the contact-relevant thermal behavior of EPMWM,and then the spiral unit containing unique structural information are further extracted and counted.In particular,the thermal resistance network is numerically constructed based on the spiral unit through the thermoelectric analogy method to accurately predict the effective thermal conductivity(ETC)of EPMWM.Finally,the thermal diffusivity and specific heat of the samples were obtained by the laser thermal analyzer to calculate the ETC and thermal insulation factor of interest.The results show that the ETC of EPMWM increases with increasing temperature or reducing density under the experimental conditions.The numerical prediction is consistent with the experimental result and the average error is less than 4%.展开更多
AIM To investigate the factors predictive of failure when placing a second biliary self-expandable metallic stents(SEMSs). METHODS This study evaluated 65 patients with an unresectable malignant hilar biliary obstruct...AIM To investigate the factors predictive of failure when placing a second biliary self-expandable metallic stents(SEMSs). METHODS This study evaluated 65 patients with an unresectable malignant hilar biliary obstruction who were examined in our hospital. Sixty-two of these patients were recruited to the study and divided into two groups: the success group, which consisted of patients in whom a stent-in-stent SEMS had been placed successfully, and the failure group, which consisted of patients in whom the stent-in-stent SEMS had not been placed successfully. We compared the characteristics of the patients, the stricture state of their biliary ducts, and the implemented endoscopic retrograde cholangiopancreatography(ERCP) procedures between the two groups.RESULTS The angle between the target biliary duct stricture and the first implanted SEMS was significantly larger in the failure group than in the success group. There were significantly fewer wire or dilation devices(ERCP catheter, dilator, or balloon catheter) passing the first SEMS cell in the failure group than in the success group. The cut-off value of the angle predicting stent-in-stent SEMS placement failure was 49.7 degrees according to the ROC curve(sensitivity 91.7%, specificity 61.2%). Furthermore, the angle was significantly smaller in patients with wire or dilation devices passing the first SEMS cell than in patients without wire or dilation devices passing the first SEMS cell. CONCLUSION A large angle was identified as a predictive factor for failure of stent-in-stent SEMS placement.展开更多
Material genetic engineering can significantly accelerate the development of new materials.As an important topic in material science and condensed matter physics,the development of metallic glasses(MGs)with specific p...Material genetic engineering can significantly accelerate the development of new materials.As an important topic in material science and condensed matter physics,the development of metallic glasses(MGs)with specific properties has largely been the result of trial and error since their discovery in 1960.Yet,property design based on the physical parameters of constituent elements of MGs remains a huge challenge owing to the lack of an understanding of the property inheritance from constitute elements to the resultant alloys.In this work,we report the inherent relationships of the yield strengthσ_(y),Young’s modulus E,and shear Modulus G with the valence electron density.More importantly,we reveal that the electronic density of states(EDOSs)at the Fermi surface(E_(F))is an inheritance factor for the physical properties of MGs.The physical properties of MGs are inherited from the specific element with the largest coefficient of electronic specific heat(γ_(i)),which dominates the value of the EDOS at E_(F).This work not only contributes to the understanding of property inheritances but also guides the design of novel MGs with specific properties based on material genetic engineering.展开更多
文摘金属飞轮功率密度大,可靠性高,是我国推广飞轮储能技术应用的重要途径。本文综合考虑应力强度、金属疲劳、储能总量、储能密度和加工工艺,依托有限元计算优化金属飞轮设计,以应对不同工况要求。飞轮材料选用35Cr Mo A,设计储能量大于20 k W·h。频繁充放电飞轮采用4倍安全系数,具备高可靠性;高速待机飞轮以疲劳极限强度作为设计准则,平衡储能量和寿命。计算对比发现,"哑铃"形截面有利于实现轻质量大转动惯量,相同储能量下降低轴承负荷。此外,文章依托模块化设计思想,提出叠层铆合飞轮设计,评估轴孔螺孔应力集中影响。上述讨论为低速大功率金属飞轮进一步设计和量产化提供了有力参考。
基金Project supported by the National Natural Science Foundation of China (Grant No.52031016)。
文摘The dramatic temperature-dependence of liquids dynamics has attracted considerable scientific interests and efforts in the past decades, but the physics of which remains elusive. In addition to temperature, some other parameters, such as pressure, loading and size, can also tune the liquid dynamics and induce glass transition, which makes the situation more complicated. Here, we performed molecular dynamics simulations for Ni_(50)Zr_(50) bulk liquid and nanodroplet to study the dynamics evolution in the complex multivariate phase space, especially along the isotherm with the change of pressure or droplet size. It is found that the short-time Debye–Waller factor universally determines the long-time relaxation dynamics no matter how the temperature, pressure or size changes. The basic correlation even holds at the local atomic scale. This finding provides general understanding of the microscopic mechanism of dynamic arrest and dynamic heterogeneity.
基金National Natural Science Foundation of China(Grant Nos.52175162,51805086 and 51975123)Natural Science Foundation of Fujian Province,China(Grant No.2019J01210)Health Education Joint Project of Fujian Province,China(Grant No.2019-WJ-01).
文摘Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great significance to reveal the thermal response mechanism of EPMWM based on its complex structural effects.In the present work,virtual manufacturing technology(VMT)was developed to restore the physics-based 3D model of EPMWM.On this basis,the transient thermal analysis is carried out to explore the contact-relevant thermal behavior of EPMWM,and then the spiral unit containing unique structural information are further extracted and counted.In particular,the thermal resistance network is numerically constructed based on the spiral unit through the thermoelectric analogy method to accurately predict the effective thermal conductivity(ETC)of EPMWM.Finally,the thermal diffusivity and specific heat of the samples were obtained by the laser thermal analyzer to calculate the ETC and thermal insulation factor of interest.The results show that the ETC of EPMWM increases with increasing temperature or reducing density under the experimental conditions.The numerical prediction is consistent with the experimental result and the average error is less than 4%.
基金Supported by Department of Gastroenterology,Fukushima Medical University,School of Medicine
文摘AIM To investigate the factors predictive of failure when placing a second biliary self-expandable metallic stents(SEMSs). METHODS This study evaluated 65 patients with an unresectable malignant hilar biliary obstruction who were examined in our hospital. Sixty-two of these patients were recruited to the study and divided into two groups: the success group, which consisted of patients in whom a stent-in-stent SEMS had been placed successfully, and the failure group, which consisted of patients in whom the stent-in-stent SEMS had not been placed successfully. We compared the characteristics of the patients, the stricture state of their biliary ducts, and the implemented endoscopic retrograde cholangiopancreatography(ERCP) procedures between the two groups.RESULTS The angle between the target biliary duct stricture and the first implanted SEMS was significantly larger in the failure group than in the success group. There were significantly fewer wire or dilation devices(ERCP catheter, dilator, or balloon catheter) passing the first SEMS cell in the failure group than in the success group. The cut-off value of the angle predicting stent-in-stent SEMS placement failure was 49.7 degrees according to the ROC curve(sensitivity 91.7%, specificity 61.2%). Furthermore, the angle was significantly smaller in patients with wire or dilation devices passing the first SEMS cell than in patients without wire or dilation devices passing the first SEMS cell. CONCLUSION A large angle was identified as a predictive factor for failure of stent-in-stent SEMS placement.
基金supported by the National Natural Science Foundation of China(Nos.51871237 and 52171165)Additional support was provided through the European Research Council under the Advanced Grant‘INTELHYB—Next Generation of Complex Metallic Materials in Intelligent Hybrid Structures’(No.ERC-2013-ADG-340025).
文摘Material genetic engineering can significantly accelerate the development of new materials.As an important topic in material science and condensed matter physics,the development of metallic glasses(MGs)with specific properties has largely been the result of trial and error since their discovery in 1960.Yet,property design based on the physical parameters of constituent elements of MGs remains a huge challenge owing to the lack of an understanding of the property inheritance from constitute elements to the resultant alloys.In this work,we report the inherent relationships of the yield strengthσ_(y),Young’s modulus E,and shear Modulus G with the valence electron density.More importantly,we reveal that the electronic density of states(EDOSs)at the Fermi surface(E_(F))is an inheritance factor for the physical properties of MGs.The physical properties of MGs are inherited from the specific element with the largest coefficient of electronic specific heat(γ_(i)),which dominates the value of the EDOS at E_(F).This work not only contributes to the understanding of property inheritances but also guides the design of novel MGs with specific properties based on material genetic engineering.
