悬停和侧滑状态的直升机主旋翼桨尖涡将穿透尾桨桨尖平面,由此导致尾桨非定常气动载荷发生明显变化。为更准确地模拟由主旋翼/尾桨干扰产生的尾桨非定常气动载荷变化,通过在面元压力项中增加由旋翼桨尖涡诱导的时变项,体现旋翼桨尖涡速...悬停和侧滑状态的直升机主旋翼桨尖涡将穿透尾桨桨尖平面,由此导致尾桨非定常气动载荷发生明显变化。为更准确地模拟由主旋翼/尾桨干扰产生的尾桨非定常气动载荷变化,通过在面元压力项中增加由旋翼桨尖涡诱导的时变项,体现旋翼桨尖涡速度和几何时变对桨叶非定常压力的影响,同时采用涡面镜像法修正涡粒子法的黏性项,确保桨叶附近区域旋翼涡量守恒,建立旋翼尾迹对尾桨叶的非定常气动干扰模型,并耦合面元/黏性涡粒子法,构建直升机主旋翼/尾桨干扰下的尾桨非定常气动载荷分析方法。通过计算AH-1G旋翼桨叶非定常气动载荷特性,并与实验测量值、计算流体力学(CFD)计算结果对比,验证本文非定常气动干扰模型的有效性。随后基于NASA ROBIN(Rotor Body Interaction)模型分析悬停、侧风和60°右侧滑状态主旋翼对尾桨非定常气动载荷的影响,分析表明主旋翼尾迹对尾桨非定常气动载荷影响显著。悬停状态的主旋翼/尾桨干扰导致尾桨拉力平均值下降、非定常气动载荷显著增加;左侧风状态,主旋翼/尾桨干扰削弱尾桨"涡环"程度,显著增加尾桨拉力和非定常气动载荷;60°右侧滑状态,主旋翼/尾桨干扰导致尾桨拉力损失最大,且在低速侧滑状态出现尾桨拉力"迅速恢复"现象,尾桨非定常气动载荷幅值迅速增加。展开更多
It is important to quickly predict the hover performance of main and tail rotors with sufficient precision for helicopter design. To investigate the effects of swirl velocities on the hover performance of main and tai...It is important to quickly predict the hover performance of main and tail rotors with sufficient precision for helicopter design. To investigate the effects of swirl velocities on the hover performance of main and tail rotors, and give a better prediction for the hover performance, a flight performance model was derived and a swirl velocity model was coupled into it. The test data of the UH-60 A helicopter were used for validation. When the blade loading coefficient of the main rotor was higher than 0.05, the effects of the swirl velocities on the main rotor power became significant. The swirl velocities increased the profile torque of the main rotor. The increased torque required the tail rotor to produce more thrust with more power consumption. At a higher blade loading coefficient of the main rotor of 0.12, the swirl velocities increased the main rotor power, tail rotor power and total power by 3.80%, 5.24% and 5.08%, respectively. The profile power increase of the main rotor caused by the profile swirl velocity was less than that of the induced swirl velocity, but the power increase was higher at high rotor blade loadings. Considering the swirl velocities in the main rotor can improve the prediction precision of the hover performance, especially at high blade loadings.展开更多
文摘悬停和侧滑状态的直升机主旋翼桨尖涡将穿透尾桨桨尖平面,由此导致尾桨非定常气动载荷发生明显变化。为更准确地模拟由主旋翼/尾桨干扰产生的尾桨非定常气动载荷变化,通过在面元压力项中增加由旋翼桨尖涡诱导的时变项,体现旋翼桨尖涡速度和几何时变对桨叶非定常压力的影响,同时采用涡面镜像法修正涡粒子法的黏性项,确保桨叶附近区域旋翼涡量守恒,建立旋翼尾迹对尾桨叶的非定常气动干扰模型,并耦合面元/黏性涡粒子法,构建直升机主旋翼/尾桨干扰下的尾桨非定常气动载荷分析方法。通过计算AH-1G旋翼桨叶非定常气动载荷特性,并与实验测量值、计算流体力学(CFD)计算结果对比,验证本文非定常气动干扰模型的有效性。随后基于NASA ROBIN(Rotor Body Interaction)模型分析悬停、侧风和60°右侧滑状态主旋翼对尾桨非定常气动载荷的影响,分析表明主旋翼尾迹对尾桨非定常气动载荷影响显著。悬停状态的主旋翼/尾桨干扰导致尾桨拉力平均值下降、非定常气动载荷显著增加;左侧风状态,主旋翼/尾桨干扰削弱尾桨"涡环"程度,显著增加尾桨拉力和非定常气动载荷;60°右侧滑状态,主旋翼/尾桨干扰导致尾桨拉力损失最大,且在低速侧滑状态出现尾桨拉力"迅速恢复"现象,尾桨非定常气动载荷幅值迅速增加。
基金National Natural Science Foundation of China (11972181)the Six Talent Peaks Project in Jiangsu Province(GDZB-013)the Open Research Foundation of the Key Rotor Aerodynamics Laboratory(2005RAL20200104)。
文摘It is important to quickly predict the hover performance of main and tail rotors with sufficient precision for helicopter design. To investigate the effects of swirl velocities on the hover performance of main and tail rotors, and give a better prediction for the hover performance, a flight performance model was derived and a swirl velocity model was coupled into it. The test data of the UH-60 A helicopter were used for validation. When the blade loading coefficient of the main rotor was higher than 0.05, the effects of the swirl velocities on the main rotor power became significant. The swirl velocities increased the profile torque of the main rotor. The increased torque required the tail rotor to produce more thrust with more power consumption. At a higher blade loading coefficient of the main rotor of 0.12, the swirl velocities increased the main rotor power, tail rotor power and total power by 3.80%, 5.24% and 5.08%, respectively. The profile power increase of the main rotor caused by the profile swirl velocity was less than that of the induced swirl velocity, but the power increase was higher at high rotor blade loadings. Considering the swirl velocities in the main rotor can improve the prediction precision of the hover performance, especially at high blade loadings.
