Fast drilling electrical discharge machining(EDM)is widely used in the manufacture of film cooling holes of turbine blades.However,due to the various hole orientations and severe electrode wear,it is relatively intric...Fast drilling electrical discharge machining(EDM)is widely used in the manufacture of film cooling holes of turbine blades.However,due to the various hole orientations and severe electrode wear,it is relatively intricate to accurately and timely identify the critical moments such as breakout,hole completion in the drilling process,and adjust the machining strategy properly.Existing breakout detection and hole completion determination methods are not suitable for the high-efficiency and fully automatic production of film cooling holes,for they almost all depend on preset thresholds or training data and become less appropriate when machining condition changes.As the breakout and hole completion detection problems can be abstracted to an online stage identification problem,in this paper,a kurtosis-based stage identification(KBSI)method,which uses a novel normalized kurtosis to denote the recent changing trends of gap voltage signals,is developed for online stage identification.The identification accuracy and generalization ability of the KBSI method have been verified in various machining conditions.To improve the overall machining efficiency,the influence of servo control parameters on machining efficiency of each machining stage was analyzed experimentally,and a new stage-wise adaptive control strategy was then proposed to dynamically adjust the servo control parameters according to the online identification results.The performance of the new strategy is evaluated by drilling film cooling holes at different hole orientations.Experimental results show that with the new control strategy,machining efficiency and the machining quality can be significantly improved.展开更多
The wire electrical discharge machining（EDM） of 6061 aluminium alloy in terms of material removal rate,kerf/slit width,surface finish and wear of electrode wire for different pulse on time and wire tension was studi...The wire electrical discharge machining（EDM） of 6061 aluminium alloy in terms of material removal rate,kerf/slit width,surface finish and wear of electrode wire for different pulse on time and wire tension was studied.Eight experiments were carried out in a wire EDM machine by varying pulse on time and wire tension.It is found that the material removal rate increases with the increase of pulse on time though the wire tension does not affect the material removal rate.It seems that the higher wire tension facilitates steady machining process,which generates low wear in wire electrode and better surface finish.The surface roughness does not change notably with the variation of pulse on time.The appearance of the machined surfaces is very similar under all the machining conditions.The machined surface contains solidified molten material,splash of materials and blisters.The increase of the pulse on time increases the wear of wire electrode due to the increase of heat input.The wear of wire electrode generates tapered slot which has higher kerf width at top side than that at bottom side.The higher electrode wear introduces higher taper.展开更多
Numerical control electrical discharge machining(NC EDM) is one of the most widely used machining technologies for manufacturing a closed blisk flow path, particularly for three-dimensional(3D) curved and twisted flow...Numerical control electrical discharge machining(NC EDM) is one of the most widely used machining technologies for manufacturing a closed blisk flow path, particularly for three-dimensional(3D) curved and twisted flow channels. In this process, tool electrode design and machining trajectory planning are the key factors affecting machining accessibility and efficiency. Herein, to reduce the difficulty in designing the electrode and its motion path in the closed curved and twisted channels, a heuristic search hybrid optimisation strategy based on channel grids is adopted to realise the initial electrode trajectory design search and optimised size reduction. By transferring the trajectory optimisation constraints from the complex free-form surface to numbered grids, the search is found to be more orderly and accurate. The two trajectory indicators, namely argument angle and minimum distance, are analysed separately for the optimised results of the adaptive learning particle swarm optimisation algorithm, demonstrating that they can meet the actual processing requirements.Experimental results of NC EDM indicate that the motion path generated by this design method can meet the machining requirements of 3D curved and twisted flow channels.展开更多
Electrode down-time is an important factor affecting the efficiency and stability of electrical discharge machining(EDM) process. In the research, a way of simulating the regulation of the electrode down-time in an ED...Electrode down-time is an important factor affecting the efficiency and stability of electrical discharge machining(EDM) process. In the research, a way of simulating the regulation of the electrode down-time in an EDM adaptive control system has been studied. All the simulations are performed on Matlab. The simulation results demonstrate that this adaptive controller by regulating electrode down-time can direct the gap state to follow the specified reference gap state with or without disturbances. Finally, the adaptive control scheme is also validated by experiments. The significance of the simulation of an EDM adaptive control system lies on the fact that it provides a convenient way to guide the actual production and provides a new study method for the research of EDM control strategy with no regard of experimental conditions.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52175426,52075333)the National Science and Technology Major Projects of China(Grant No.2018ZX04005001).
文摘Fast drilling electrical discharge machining(EDM)is widely used in the manufacture of film cooling holes of turbine blades.However,due to the various hole orientations and severe electrode wear,it is relatively intricate to accurately and timely identify the critical moments such as breakout,hole completion in the drilling process,and adjust the machining strategy properly.Existing breakout detection and hole completion determination methods are not suitable for the high-efficiency and fully automatic production of film cooling holes,for they almost all depend on preset thresholds or training data and become less appropriate when machining condition changes.As the breakout and hole completion detection problems can be abstracted to an online stage identification problem,in this paper,a kurtosis-based stage identification(KBSI)method,which uses a novel normalized kurtosis to denote the recent changing trends of gap voltage signals,is developed for online stage identification.The identification accuracy and generalization ability of the KBSI method have been verified in various machining conditions.To improve the overall machining efficiency,the influence of servo control parameters on machining efficiency of each machining stage was analyzed experimentally,and a new stage-wise adaptive control strategy was then proposed to dynamically adjust the servo control parameters according to the online identification results.The performance of the new strategy is evaluated by drilling film cooling holes at different hole orientations.Experimental results show that with the new control strategy,machining efficiency and the machining quality can be significantly improved.
文摘The wire electrical discharge machining（EDM） of 6061 aluminium alloy in terms of material removal rate,kerf/slit width,surface finish and wear of electrode wire for different pulse on time and wire tension was studied.Eight experiments were carried out in a wire EDM machine by varying pulse on time and wire tension.It is found that the material removal rate increases with the increase of pulse on time though the wire tension does not affect the material removal rate.It seems that the higher wire tension facilitates steady machining process,which generates low wear in wire electrode and better surface finish.The surface roughness does not change notably with the variation of pulse on time.The appearance of the machined surfaces is very similar under all the machining conditions.The machined surface contains solidified molten material,splash of materials and blisters.The increase of the pulse on time increases the wear of wire electrode due to the increase of heat input.The wear of wire electrode generates tapered slot which has higher kerf width at top side than that at bottom side.The higher electrode wear introduces higher taper.
基金financially supported by Aeronautical Science Foundation of China(No.2011ZE52055)Fundamental Research Funds for the Central Universities(No.3082018NF2018006)。
文摘Numerical control electrical discharge machining(NC EDM) is one of the most widely used machining technologies for manufacturing a closed blisk flow path, particularly for three-dimensional(3D) curved and twisted flow channels. In this process, tool electrode design and machining trajectory planning are the key factors affecting machining accessibility and efficiency. Herein, to reduce the difficulty in designing the electrode and its motion path in the closed curved and twisted channels, a heuristic search hybrid optimisation strategy based on channel grids is adopted to realise the initial electrode trajectory design search and optimised size reduction. By transferring the trajectory optimisation constraints from the complex free-form surface to numbered grids, the search is found to be more orderly and accurate. The two trajectory indicators, namely argument angle and minimum distance, are analysed separately for the optimised results of the adaptive learning particle swarm optimisation algorithm, demonstrating that they can meet the actual processing requirements.Experimental results of NC EDM indicate that the motion path generated by this design method can meet the machining requirements of 3D curved and twisted flow channels.
文摘Electrode down-time is an important factor affecting the efficiency and stability of electrical discharge machining(EDM) process. In the research, a way of simulating the regulation of the electrode down-time in an EDM adaptive control system has been studied. All the simulations are performed on Matlab. The simulation results demonstrate that this adaptive controller by regulating electrode down-time can direct the gap state to follow the specified reference gap state with or without disturbances. Finally, the adaptive control scheme is also validated by experiments. The significance of the simulation of an EDM adaptive control system lies on the fact that it provides a convenient way to guide the actual production and provides a new study method for the research of EDM control strategy with no regard of experimental conditions.
