The hydrogenation of m-dinitrobenzene to m-phenylenediamine in liquid phase was studied with the nickel catalysts supported on SiO2, TiO2, γ-Al2O3, MgO and diatomite carders. Based on the experiments of X-ray diffrac...The hydrogenation of m-dinitrobenzene to m-phenylenediamine in liquid phase was studied with the nickel catalysts supported on SiO2, TiO2, γ-Al2O3, MgO and diatomite carders. Based on the experiments of X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR）, temperature-programmed desorption of hydrogen （H2-TPD） and activity evaluation, the physico-chemical and catalytic properties of the catalysts were investigated. Among the catalysts tested, the SiO2 supported nickel catalyst showed the highest activity and selectivity towards m-phenylenediamine, over which 97.3% m-dinitrobenzene conversion and 95.1% m-phenylenediamine yield were obtained at 373K under hydrogen pressure of 2.6MPa after reaction for 6 h when using ethanol as solvent. Although TiO2 and diatomite supported nickel catalysts also presented high activity, they had lower selectivity towards m-phenylenediamine. As for γ-Al2O3 and MgO supported catalysts were almost inactive for the object reaction. It was shown that both the activity and selectivity of the catalysts were strongly depended on the interaction between nickel and the support. The higher activities of Ni/SiO2, Ni/TiO2 and Ni/diatomite could be attributed to the weaker metal-support interaction, on which Ni species presented as crystallized Ni metal particles. On the other hand, there existed strong metal-support interaction in Ni/MgO and Ni γ-Al2O3, which causes these catalysts more difficult to be reduced and the availability of Ni active sites decreased, resulting in their low catalytic activity.展开更多
In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were ...In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were determined in the temperature ranging from 278.15 K to 313.15 K by using the gravimetric method under atmospheric pressure. In the temperature range of 278.15 K to 313.15 K, the mole fraction solubility values of m-phenylenediamine in water, methanol, ethanol, and acetonitrile are 0.0093–0.1533, 0.1668–0.5589,0.1072–0.5356, and 0.1717–0.6438, respectively. At constant temperature and solvent composition, the mole fraction solubility of o-phenylenediamine in four pure solvents was increased as the following order:water b ethanol b methanol b acetonitrile;and in the three binary solvent mixtures could be ranked as follows:(ethanol + water) b(methanol + water) b(acetonitrile + water). The relationship between the experimental temperature and the solubility of m-phenylenediamine was revealed as follows: the solubility of mphenylenediamine in pure and binary solvents could be increased with the increase of temperature. The experimental values were correlated with the Jouyban–Acree model, van’t Hoff–Jouyban–Acree model, modified Apelblat–Jouyban–Acree model, Sun model and Ma model. The standard dissolution enthalpy, standard dissolution entropy and the Gibbs energy were calculated based on the experimental solubility data. In the binary solvent mixtures, the dissolution of m-phenylenediamine could be an endothermic process. The solubility data,correlation equations and thermodynamic property obtained from this study would be invoked as basic data and models regarding the purification and crystallization process of m-phenylenediamine.展开更多
Industry progressing caused the pollutants into the surface and groundwater,including organic pollutants such as phenylenediamine(PD)and heavy metals such as Cr(Ⅵ).Herein,a simple"three-in-one"strategy base...Industry progressing caused the pollutants into the surface and groundwater,including organic pollutants such as phenylenediamine(PD)and heavy metals such as Cr(Ⅵ).Herein,a simple"three-in-one"strategy based on MOF-199 was demonstrated.The MOF-199 catalytic system could be used for the rapid detection of Cr(Ⅵ)and o-phenylenediamine(OPD)in linear ranges of 0.5-50.0μmol/L and 7.0-250.0μmol/L,with the limits of detection of 0.1 and 0.5μmol/L,respectively.This method can also efficiently discriminate PD isomers in just 15 min.Meanwhile,Cr(Ⅵ)was reduced to Cr(Ⅲ)and the elimination of OPD was carried out.Given simple synthesis,high sensitivity,easy operation,and low cost,this method presented a potential platform for on-site detection of pollutants in water samples.展开更多
文摘The hydrogenation of m-dinitrobenzene to m-phenylenediamine in liquid phase was studied with the nickel catalysts supported on SiO2, TiO2, γ-Al2O3, MgO and diatomite carders. Based on the experiments of X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR）, temperature-programmed desorption of hydrogen （H2-TPD） and activity evaluation, the physico-chemical and catalytic properties of the catalysts were investigated. Among the catalysts tested, the SiO2 supported nickel catalyst showed the highest activity and selectivity towards m-phenylenediamine, over which 97.3% m-dinitrobenzene conversion and 95.1% m-phenylenediamine yield were obtained at 373K under hydrogen pressure of 2.6MPa after reaction for 6 h when using ethanol as solvent. Although TiO2 and diatomite supported nickel catalysts also presented high activity, they had lower selectivity towards m-phenylenediamine. As for γ-Al2O3 and MgO supported catalysts were almost inactive for the object reaction. It was shown that both the activity and selectivity of the catalysts were strongly depended on the interaction between nickel and the support. The higher activities of Ni/SiO2, Ni/TiO2 and Ni/diatomite could be attributed to the weaker metal-support interaction, on which Ni species presented as crystallized Ni metal particles. On the other hand, there existed strong metal-support interaction in Ni/MgO and Ni γ-Al2O3, which causes these catalysts more difficult to be reduced and the availability of Ni active sites decreased, resulting in their low catalytic activity.
基金financially supported by the North Chemical Group Youth Science and Technology Innovation Foundation of China(QKCZ201627)
文摘In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were determined in the temperature ranging from 278.15 K to 313.15 K by using the gravimetric method under atmospheric pressure. In the temperature range of 278.15 K to 313.15 K, the mole fraction solubility values of m-phenylenediamine in water, methanol, ethanol, and acetonitrile are 0.0093–0.1533, 0.1668–0.5589,0.1072–0.5356, and 0.1717–0.6438, respectively. At constant temperature and solvent composition, the mole fraction solubility of o-phenylenediamine in four pure solvents was increased as the following order:water b ethanol b methanol b acetonitrile;and in the three binary solvent mixtures could be ranked as follows:(ethanol + water) b(methanol + water) b(acetonitrile + water). The relationship between the experimental temperature and the solubility of m-phenylenediamine was revealed as follows: the solubility of mphenylenediamine in pure and binary solvents could be increased with the increase of temperature. The experimental values were correlated with the Jouyban–Acree model, van’t Hoff–Jouyban–Acree model, modified Apelblat–Jouyban–Acree model, Sun model and Ma model. The standard dissolution enthalpy, standard dissolution entropy and the Gibbs energy were calculated based on the experimental solubility data. In the binary solvent mixtures, the dissolution of m-phenylenediamine could be an endothermic process. The solubility data,correlation equations and thermodynamic property obtained from this study would be invoked as basic data and models regarding the purification and crystallization process of m-phenylenediamine.
基金supported by the National Natural Science Foundation of China(NSFC)Fund(22174058,U21A20282)Sci-tech plan projects of Gansu province(22CX3GA023).
文摘Industry progressing caused the pollutants into the surface and groundwater,including organic pollutants such as phenylenediamine(PD)and heavy metals such as Cr(Ⅵ).Herein,a simple"three-in-one"strategy based on MOF-199 was demonstrated.The MOF-199 catalytic system could be used for the rapid detection of Cr(Ⅵ)and o-phenylenediamine(OPD)in linear ranges of 0.5-50.0μmol/L and 7.0-250.0μmol/L,with the limits of detection of 0.1 and 0.5μmol/L,respectively.This method can also efficiently discriminate PD isomers in just 15 min.Meanwhile,Cr(Ⅵ)was reduced to Cr(Ⅲ)and the elimination of OPD was carried out.Given simple synthesis,high sensitivity,easy operation,and low cost,this method presented a potential platform for on-site detection of pollutants in water samples.
