Structural materials usually suffer from several attacks during their service,such as tension,fatigue and corrosion.It is necessary to synchronously improve these properties for their lightweight and longlifetime,but ...Structural materials usually suffer from several attacks during their service,such as tension,fatigue and corrosion.It is necessary to synchronously improve these properties for their lightweight and longlifetime,but corrosion resistance and ductility are generally inverse correlation with strength,it is very difficult to simultaneously optimize all three properties.However,bulk nanocrystalline 304 stainless steel(BN-304SS)produced by severe rolling technology possessed the larger yield and ultimate tensile strengths with sufficient elongation(>40%)during tensile test,the larger saturation stress and longer lifetime during low-cycle fatigue,the enhanced uniform and pitting corrosion resistances during fiveday immersion test in 6 mol/L HCl,the lowered stress corrosion cracking(SCC)susceptibility with larger yield(~2.40 GPa)and ultimate tensile(~2.66 GPa)strengths,and enough elongation(>30%)during stress corrosion in comparison with conventional polycrystalline 304 stainless steel(CP-304 SS)counterpart.The uniform and pitting corrosion resistances of fractured BN-304SS were enhanced in comprsion with those of fractured CP-304 SS during seven-day immersion test in 1 mol/L HCl.These results demonstrated the strengths,ductility and corrosion resistances of BN-304SS can be simultaneously optimized by severe rolling technology.These improved results of BN-304SS in different disciplines were understood by its valence electron configurations rather than traditional microstructural parameters.展开更多
Fatigue failure is one of the main failure forms of Al-Si-Cu-Mg aluminum alloys. To feature their mechanical aspect of fatigue behavior, the low-cycle fatigue behavior of permanent mold cast and die-cast AI-Si- Cu-Mg ...Fatigue failure is one of the main failure forms of Al-Si-Cu-Mg aluminum alloys. To feature their mechanical aspect of fatigue behavior, the low-cycle fatigue behavior of permanent mold cast and die-cast AI-Si- Cu-Mg alloys at room temperature was investigated. The experimental results show that both permanent mold cast and die-cast AI-Si-Cu-Mg alloys mainly exhibit cyclic strain hardening. At the same total strain amplitude, the diecast AI-Si-Cu-Mg alloy shows higher cyclic deformation resistance and longer fatigue life than does the permanent mold cast AI-Si-Cu-Mg alloy. The relationship between both elastic and plastic strain amplitudes with reversals to failure shows a monotonic linear behavior, and can be described by the Basquin and Coffin-Manson equations, respectively.展开更多
Fatigue failure is a main failure mode for magnesium and other alloys. It is beneficial for fatigue design and fatigue life improvement to investigate the low cycle fatigue behavior of magnesium alloys. In order to in...Fatigue failure is a main failure mode for magnesium and other alloys. It is beneficial for fatigue design and fatigue life improvement to investigate the low cycle fatigue behavior of magnesium alloys. In order to investigate the low cycle fatigue behavior of die cast Mg-AI-Mn-Ce magnesium alloy, the strain controlled fatigue experiments were performed at room temperature and fatigue fracture surfaces of specimens were observed with scanning election microscopy for the alloys under die-cast and aged states. Cyclic stress response curves, strain amplitude versus reversals to failure curve, total strain amplitude versus fatigue life curves and cyclic stress-strain curves of Mg-AI-Mn-Ce alloys were analyzed. The results show that the Mg-AI-Mn-Ce alloys under die-cast （F） and aged （T5） states exhibit cyclic strain hardening under the applied total strain amplitudes, and aging treatment could greatly increase the cyclic stress amplitudes of die cast Mg-AI-Mn-Ce alloys. The relationships between the plastic strain amplitude, the elastic strain amplitude and reversals to failure of Mg-AI-Mn-Ce magnesium alloy under different treatment states could be described by Coffin-Manson and Basquin equations, respectively. Observations on the fatigue fracture surface of specimens reveal that the fatigue cracks initiate on the surface of specimens and propagate transgranularly.展开更多
Fracture behaviour of low-alloy steels AIST4340,HY100,Welten60,AISIA537 and A131 in artificial seawater under static,cyclic loading and at cathodic protection potential has been investigated by using the techniques of...Fracture behaviour of low-alloy steels AIST4340,HY100,Welten60,AISIA537 and A131 in artificial seawater under static,cyclic loading and at cathodic protection potential has been investigated by using the techniques of fracture mechanics, electrochemistry and electronfractography.The results reveal that at hydrogen evolution potentials(cathodic pro- tection potential)the critical yield strength required for the occurrance of SCC decreases from 985 at corrosion potential(E_c)to 872 MPa.The effect of cathodic protection on crack propagation of corrosion fatigue(CF)is not simple,it is closely related to the yield strength of steels and their SCC behaviour.For the steels with high yield strength,cathodic protection promotes(da/dN)_Ⅱ evidently,and reduces △K_(th) value.The(da/dN)-△K curves dis- play a plateau at the third stage of CF for steels with medium or low yield strength.It is men- tioned that the cathodic protection potential for oceaneering constructures should be control- led at top level of the protective range.It seems reasonable that the strength of steel for oceaneeing use might be increased by 200 or 300 MPa.展开更多
基金the financial support of National Natural Sciences of Foundation of China(Contract No.51171199)the cooperation project from Pujiang,Chengdu,Sichuan Province,China,No.Y5N4811181.
文摘Structural materials usually suffer from several attacks during their service,such as tension,fatigue and corrosion.It is necessary to synchronously improve these properties for their lightweight and longlifetime,but corrosion resistance and ductility are generally inverse correlation with strength,it is very difficult to simultaneously optimize all three properties.However,bulk nanocrystalline 304 stainless steel(BN-304SS)produced by severe rolling technology possessed the larger yield and ultimate tensile strengths with sufficient elongation(>40%)during tensile test,the larger saturation stress and longer lifetime during low-cycle fatigue,the enhanced uniform and pitting corrosion resistances during fiveday immersion test in 6 mol/L HCl,the lowered stress corrosion cracking(SCC)susceptibility with larger yield(~2.40 GPa)and ultimate tensile(~2.66 GPa)strengths,and enough elongation(>30%)during stress corrosion in comparison with conventional polycrystalline 304 stainless steel(CP-304 SS)counterpart.The uniform and pitting corrosion resistances of fractured BN-304SS were enhanced in comprsion with those of fractured CP-304 SS during seven-day immersion test in 1 mol/L HCl.These results demonstrated the strengths,ductility and corrosion resistances of BN-304SS can be simultaneously optimized by severe rolling technology.These improved results of BN-304SS in different disciplines were understood by its valence electron configurations rather than traditional microstructural parameters.
文摘Fatigue failure is one of the main failure forms of Al-Si-Cu-Mg aluminum alloys. To feature their mechanical aspect of fatigue behavior, the low-cycle fatigue behavior of permanent mold cast and die-cast AI-Si- Cu-Mg alloys at room temperature was investigated. The experimental results show that both permanent mold cast and die-cast AI-Si-Cu-Mg alloys mainly exhibit cyclic strain hardening. At the same total strain amplitude, the diecast AI-Si-Cu-Mg alloy shows higher cyclic deformation resistance and longer fatigue life than does the permanent mold cast AI-Si-Cu-Mg alloy. The relationship between both elastic and plastic strain amplitudes with reversals to failure shows a monotonic linear behavior, and can be described by the Basquin and Coffin-Manson equations, respectively.
基金financially supported by the Science and Technology Research Project of Liaoning Province Education Department(L2012038)
文摘Fatigue failure is a main failure mode for magnesium and other alloys. It is beneficial for fatigue design and fatigue life improvement to investigate the low cycle fatigue behavior of magnesium alloys. In order to investigate the low cycle fatigue behavior of die cast Mg-AI-Mn-Ce magnesium alloy, the strain controlled fatigue experiments were performed at room temperature and fatigue fracture surfaces of specimens were observed with scanning election microscopy for the alloys under die-cast and aged states. Cyclic stress response curves, strain amplitude versus reversals to failure curve, total strain amplitude versus fatigue life curves and cyclic stress-strain curves of Mg-AI-Mn-Ce alloys were analyzed. The results show that the Mg-AI-Mn-Ce alloys under die-cast （F） and aged （T5） states exhibit cyclic strain hardening under the applied total strain amplitudes, and aging treatment could greatly increase the cyclic stress amplitudes of die cast Mg-AI-Mn-Ce alloys. The relationships between the plastic strain amplitude, the elastic strain amplitude and reversals to failure of Mg-AI-Mn-Ce magnesium alloy under different treatment states could be described by Coffin-Manson and Basquin equations, respectively. Observations on the fatigue fracture surface of specimens reveal that the fatigue cracks initiate on the surface of specimens and propagate transgranularly.
文摘Fracture behaviour of low-alloy steels AIST4340,HY100,Welten60,AISIA537 and A131 in artificial seawater under static,cyclic loading and at cathodic protection potential has been investigated by using the techniques of fracture mechanics, electrochemistry and electronfractography.The results reveal that at hydrogen evolution potentials(cathodic pro- tection potential)the critical yield strength required for the occurrance of SCC decreases from 985 at corrosion potential(E_c)to 872 MPa.The effect of cathodic protection on crack propagation of corrosion fatigue(CF)is not simple,it is closely related to the yield strength of steels and their SCC behaviour.For the steels with high yield strength,cathodic protection promotes(da/dN)_Ⅱ evidently,and reduces △K_(th) value.The(da/dN)-△K curves dis- play a plateau at the third stage of CF for steels with medium or low yield strength.It is men- tioned that the cathodic protection potential for oceaneering constructures should be control- led at top level of the protective range.It seems reasonable that the strength of steel for oceaneeing use might be increased by 200 or 300 MPa.
