Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation hysteresis.The application of shape memory effect depends on multistep thermomechan-ical loading...Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation hysteresis.The application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to recovery.Low-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA components.However,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still unclear.To this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were investigated.The results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,respectively.In stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb inclusions.In stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced martensite.More{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then decreases.Theε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%prestrain.The increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound twins.While the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite twins.The effect ofβ-Nb inclusions o展开更多
Palladium-exchanged chabazite(Pd-CHA) zeolites as passive NO_x adsorbers(PNAs) enable efficient purification of nitrogen oxides(NO_x) in cold-start diesel exhausts. Their commercial application, however,is limited by ...Palladium-exchanged chabazite(Pd-CHA) zeolites as passive NO_x adsorbers(PNAs) enable efficient purification of nitrogen oxides(NO_x) in cold-start diesel exhausts. Their commercial application, however,is limited by the lack of facile preparation method. Here, high-performance CHA-type Pd-SAPO-34 zeolite was synthesized by a modified solid-state ion exchange(SSIE) method using PdO as Pd precursor,and demonstrated superior PNA performance as compared to Pd-SAPO-34 prepared by conventional wetchemistry strategies. Structural characterization using Raman spectroscopy and X-ray diffraction revealed that the SSIE method avoided water-induced damage to the zeolite framework during Pd loading. Mechanistic investigations on the SSIE process by in situ infrared spectroscopy and X-ray photoelectron spectroscopy disclosed that, while PdO precursor was mainly converted to Pd^(2+) cations coordinated to the zeolite framework by consuming the-OH groups of the zeolite, a portion of PdO could also undergo thermal decomposition to form highly dispersed Pd~0 clusters in the pore channels. This simplified and scalable SSIE method paves a new way for the cost-effective synthesis of defect-free high-performance Pd-SAPO-34 zeolites as PNA catalysts.展开更多
By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) ...By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.展开更多
As an attractive class of metallic materials,single-phase CrCoNi medium-entropy alloy(MEA)has drawn much attention recently regarding their deformation behaviors,but the dynamically mechanical responses of this alloy ...As an attractive class of metallic materials,single-phase CrCoNi medium-entropy alloy(MEA)has drawn much attention recently regarding their deformation behaviors,but the dynamically mechanical responses of this alloy at high strain rates remain less studied,especially coupled with extremely low temperatures.In this study,the dynamic deformation behaviors of this CrCoNi MEA were systematically investigated at room temperature(RT)of 298 K and liquid nitrogen temperature(LNT)of 77 K using the split Hopkinson pressure bar(SHPB).This alloy exhibited a combination of higher yield strength and stronger hardening rate upon dynamic compressive deformation when the loading conditions become much harsher(higher strain rate or lower temperature).Detailed microstructure analyses indicated that the strong strain hardening ability during dynamic deformation was mainly attributed to the continuous formation of nanoscale deformation twins.Furthermore,as loaded at LNT,multi-directional deformation twins were activated.Meanwhile,due to the interaction between Shockley partial dislocations and twin boundaries,large-sized deformation-induced FCC-HCP phase transformations at a micrometer scale were also observed within the grains,which not only accommodated the plasticity but also played an important role in improving the hardening capability owing to the appearance of newly generated interfaces.展开更多
The effects of shock loading on the morphology,grain growth during heating and phase transforma- tion of ZrO_2 have been investigated.It is shown that shock loading may be efficiently used to modify submicron ceramic ...The effects of shock loading on the morphology,grain growth during heating and phase transforma- tion of ZrO_2 have been investigated.It is shown that shock loading may be efficiently used to modify submicron ceramic powders with nanocrystalline structure.After shock loading,the critical diameter of ZrO_2 particles transformed from tetragonal to monoclinic decreased due to stored strain energy. Annealing of powders resulted in reversible transformation to the tetragonal without considerable grain growth up to 1200℃.展开更多
The power-law relationship between creep rate decay and time is one of the intrinsic characteristics of metallic glasses.In the current work,a La_(30)Ce_(30)Ni_(10)Al_(20)Co_(10) high-entropy metallic glass was select...The power-law relationship between creep rate decay and time is one of the intrinsic characteristics of metallic glasses.In the current work,a La_(30)Ce_(30)Ni_(10)Al_(20)Co_(10) high-entropy metallic glass was selected as the model alloy to test the influences of physical aging and cyclic loading on the power-law creep mechanism,which was probed by the dynamic mechanical analysis in terms of the stochastic activation,and contiguous interplay and permeation of shear transformation zones.It is demonstrated that a notable discrepancy appears between thermal treatment and mechanical treatment on the power-law creep mechanism of this high-entropy metallic glass.On the one hand,physical aging below the glass transition temperature introduces the annihilation of potential shear transformation zones which contribute to creep.On the other hand,cyclic loading can tailor the“forward”jump operations competing with the“backward”ones of shear transformation zones by controlling the interval time(recovery time).The current research offers a new pathway towards understanding the creep mechanism of high-entropy metallic glasses.展开更多
基金support from the National Natural Science Foundation of China(No.51775441)the National Science Fund for Excellent Young Scholars(No.51522509).
文摘Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation hysteresis.The application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to recovery.Low-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA components.However,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still unclear.To this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were investigated.The results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,respectively.In stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb inclusions.In stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced martensite.More{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then decreases.Theε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%prestrain.The increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound twins.While the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite twins.The effect ofβ-Nb inclusions o
基金supported by the National Natural Science Foundation of China (No.21976058)the Natural Science Foundation of Guangdong Province (No.2023A1515011682)+3 种基金the Fundamental Research Funds for the Central Universities (No.2022ZYGXZR018)the National Engineering Laboratory for Mobile Source Emission Control Technology (No.NELMS2020A10)the funding from the Pearl River Talent Recruitment Program of Guangdong Province (No.2019QN01L170)the Innovation & Entrepreneurship Talent Program of Shaoguan City。
文摘Palladium-exchanged chabazite(Pd-CHA) zeolites as passive NO_x adsorbers(PNAs) enable efficient purification of nitrogen oxides(NO_x) in cold-start diesel exhausts. Their commercial application, however,is limited by the lack of facile preparation method. Here, high-performance CHA-type Pd-SAPO-34 zeolite was synthesized by a modified solid-state ion exchange(SSIE) method using PdO as Pd precursor,and demonstrated superior PNA performance as compared to Pd-SAPO-34 prepared by conventional wetchemistry strategies. Structural characterization using Raman spectroscopy and X-ray diffraction revealed that the SSIE method avoided water-induced damage to the zeolite framework during Pd loading. Mechanistic investigations on the SSIE process by in situ infrared spectroscopy and X-ray photoelectron spectroscopy disclosed that, while PdO precursor was mainly converted to Pd^(2+) cations coordinated to the zeolite framework by consuming the-OH groups of the zeolite, a portion of PdO could also undergo thermal decomposition to form highly dispersed Pd~0 clusters in the pore channels. This simplified and scalable SSIE method paves a new way for the cost-effective synthesis of defect-free high-performance Pd-SAPO-34 zeolites as PNA catalysts.
基金the National Natural Science Foundation of China(Grant No.11872317)Science Challenge Project(Grant No.TZ2018001)the Fundamental Research Funds for the Central Universities(Grant No.3102019ZX001).
文摘By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.
基金supported by the National Natural Science Foundation of China(Grant No.12102363)the China National Funds for Distinguished Young Scientists(Grant No.12025205).
文摘As an attractive class of metallic materials,single-phase CrCoNi medium-entropy alloy(MEA)has drawn much attention recently regarding their deformation behaviors,but the dynamically mechanical responses of this alloy at high strain rates remain less studied,especially coupled with extremely low temperatures.In this study,the dynamic deformation behaviors of this CrCoNi MEA were systematically investigated at room temperature(RT)of 298 K and liquid nitrogen temperature(LNT)of 77 K using the split Hopkinson pressure bar(SHPB).This alloy exhibited a combination of higher yield strength and stronger hardening rate upon dynamic compressive deformation when the loading conditions become much harsher(higher strain rate or lower temperature).Detailed microstructure analyses indicated that the strong strain hardening ability during dynamic deformation was mainly attributed to the continuous formation of nanoscale deformation twins.Furthermore,as loaded at LNT,multi-directional deformation twins were activated.Meanwhile,due to the interaction between Shockley partial dislocations and twin boundaries,large-sized deformation-induced FCC-HCP phase transformations at a micrometer scale were also observed within the grains,which not only accommodated the plasticity but also played an important role in improving the hardening capability owing to the appearance of newly generated interfaces.
文摘The effects of shock loading on the morphology,grain growth during heating and phase transforma- tion of ZrO_2 have been investigated.It is shown that shock loading may be efficiently used to modify submicron ceramic powders with nanocrystalline structure.After shock loading,the critical diameter of ZrO_2 particles transformed from tetragonal to monoclinic decreased due to stored strain energy. Annealing of powders resulted in reversible transformation to the tetragonal without considerable grain growth up to 1200℃.
基金the National Natural Science Foundation of China(NSFC,No.51971178)the Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province(No.2021JC-12)+3 种基金the Natural Science Foundation of Chongqing(No.cstc2020jcyj-jq X0001)sponsored by Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX2021015)financial support from MICINN(grant PID2020112975GB-I00)Generalitat de Catalunya(grant 2017SGR0042)。
文摘The power-law relationship between creep rate decay and time is one of the intrinsic characteristics of metallic glasses.In the current work,a La_(30)Ce_(30)Ni_(10)Al_(20)Co_(10) high-entropy metallic glass was selected as the model alloy to test the influences of physical aging and cyclic loading on the power-law creep mechanism,which was probed by the dynamic mechanical analysis in terms of the stochastic activation,and contiguous interplay and permeation of shear transformation zones.It is demonstrated that a notable discrepancy appears between thermal treatment and mechanical treatment on the power-law creep mechanism of this high-entropy metallic glass.On the one hand,physical aging below the glass transition temperature introduces the annihilation of potential shear transformation zones which contribute to creep.On the other hand,cyclic loading can tailor the“forward”jump operations competing with the“backward”ones of shear transformation zones by controlling the interval time(recovery time).The current research offers a new pathway towards understanding the creep mechanism of high-entropy metallic glasses.
