The main area of the Jiaoshiba anticline of the Fuling shale gas field was taken as the research object,laboratory rock mechanical experiments and direct shear experiments were conducted to clarify the mechanical anis...The main area of the Jiaoshiba anticline of the Fuling shale gas field was taken as the research object,laboratory rock mechanical experiments and direct shear experiments were conducted to clarify the mechanical anisotropy characteristics and parameters of rock samples with rich beddings.Based on the experimental results,a 3D fracture propagation model of the target reservoir taking mechanical anisotropy,weak bedding plane and vertical stress difference into account was established by the discrete element method to analyze distribution patterns of hydraulic fractures under different bedding densities,mechanical properties,and fracturing engineering parameters(including perforation clusters,injection rates and fracturing fluid viscosity).The research results show that considering the influence of the weak bedding plane and longitudinal stress difference,the interlayer stress difference 3–4 MPa in the study area can control the fracture height within the zone of stress barrier,and the fracture height is less than 40 m.If the influence of the weak bedding plane is not considered,the simulation result of fracture height is obviously higher.Although the opening of high-density bedding fractures increases the complexity of hydraulic fractures,it significantly limited the propagation of fracture height.By reducing the number of clusters,increasing the injection rate,and increasing the volume and proportion of high-viscosity fracturing fluid in the pad stage,the restriction on fracture height due to the bedding plane and vertical stress difference can be reduced,and the longitudinal propagation of fractures can be promoted.The fracture propagation model was used to simulate one stage of Well A in Fuling shale gas field,and the simulation results were consistent with the micro-seismic monitoring results.展开更多
The lithology, lithofacies, reservoir properties and shale oil enrichment model of the fine-grained sedimentary system in a lake basin with terrigenous clastics of large depression are studied taking the organic-rich ...The lithology, lithofacies, reservoir properties and shale oil enrichment model of the fine-grained sedimentary system in a lake basin with terrigenous clastics of large depression are studied taking the organic-rich shale in the first member of Cretaceous Qingshankou Formation(shortened as Qing 1 Member) in the Changling Sag, southern Songliao Basin as an example. A comprehensive analysis of mineralogy, thin section, test, log and drilling geologic data shows that lamellar shale with high TOC content of semi-deep lake to deep lake facies has higher hydrocarbon generation potential than the massive mudstone facies with medium TOC content, and has bedding-parallel fractures acting as effective reservoir space under over pressure. The sedimentary environments changing periodically and the undercurrent transport deposits in the outer delta front give rise to laminated shale area. The laminated shale with medium TOC content has higher hydrocarbon generation potential than the laminated shale with low TOC content, and the generated oil migrates a short distance to the sandy laminae to retain and accumulate in situ. Ultra-low permeability massive mudstone facies as the top and bottom seals, good preservation conditions, high pressure coefficient, and lamellar shale facies with high TOC are the conditions for "lamellation type" shale oil enrichment in some sequences and zones. The sequence and zone with laminated shale of medium TOC content in oil window and with micro-migration of expelled hydrocarbon are the condition for the enrichment of "lamination type" shale oil. The tight oil and "lamination type" shale oil are in contiguous distribution.展开更多
In this study, freeze - fractured specimens of Allium cepa root tip meristems were examined under the scanning electron microscope (SEM). This technique permitted the visualization of the outer membrane of the nuclear...In this study, freeze - fractured specimens of Allium cepa root tip meristems were examined under the scanning electron microscope (SEM). This technique permitted the visualization of the outer membrane of the nuclear envelope with nuclear pore complexes and polyribosomes. Some of the cell nuclei prepared with this procedure had fissures of various widths on their nuclear envelopes through which the nuclear lamina-like filaments (LLF) underneath the nucleoplasmic side of the envelopes were clearly visible. The diameters of these filaments varied between 25 and 125 nm. Many of the LLFs showed granular thickenings at places, and were attached to the inner surface of nuclear envelope in some regions. Similar LLFs were also seen at the peripheries of the freeze -fractured faces of nuclei. Meanwhile,the spatial relation between the nuclear matrix filaments (NMF) and other nuclear structures (nucleoli, chromatin and peripheral lamina - like filaments) was revealed in these fractured preparations. In addition, the methods and techniques in studying the nuclear lamina morphology and the roles played by NMFs in activities of various nuclear structures were discussed in brief.展开更多
基金Supported by the China National Science and Technology Major Project(2016ZX05060001-032)
文摘The main area of the Jiaoshiba anticline of the Fuling shale gas field was taken as the research object,laboratory rock mechanical experiments and direct shear experiments were conducted to clarify the mechanical anisotropy characteristics and parameters of rock samples with rich beddings.Based on the experimental results,a 3D fracture propagation model of the target reservoir taking mechanical anisotropy,weak bedding plane and vertical stress difference into account was established by the discrete element method to analyze distribution patterns of hydraulic fractures under different bedding densities,mechanical properties,and fracturing engineering parameters(including perforation clusters,injection rates and fracturing fluid viscosity).The research results show that considering the influence of the weak bedding plane and longitudinal stress difference,the interlayer stress difference 3–4 MPa in the study area can control the fracture height within the zone of stress barrier,and the fracture height is less than 40 m.If the influence of the weak bedding plane is not considered,the simulation result of fracture height is obviously higher.Although the opening of high-density bedding fractures increases the complexity of hydraulic fractures,it significantly limited the propagation of fracture height.By reducing the number of clusters,increasing the injection rate,and increasing the volume and proportion of high-viscosity fracturing fluid in the pad stage,the restriction on fracture height due to the bedding plane and vertical stress difference can be reduced,and the longitudinal propagation of fractures can be promoted.The fracture propagation model was used to simulate one stage of Well A in Fuling shale gas field,and the simulation results were consistent with the micro-seismic monitoring results.
基金Supported by the National Natural Science Foundation of China(41972156)。
文摘The lithology, lithofacies, reservoir properties and shale oil enrichment model of the fine-grained sedimentary system in a lake basin with terrigenous clastics of large depression are studied taking the organic-rich shale in the first member of Cretaceous Qingshankou Formation(shortened as Qing 1 Member) in the Changling Sag, southern Songliao Basin as an example. A comprehensive analysis of mineralogy, thin section, test, log and drilling geologic data shows that lamellar shale with high TOC content of semi-deep lake to deep lake facies has higher hydrocarbon generation potential than the massive mudstone facies with medium TOC content, and has bedding-parallel fractures acting as effective reservoir space under over pressure. The sedimentary environments changing periodically and the undercurrent transport deposits in the outer delta front give rise to laminated shale area. The laminated shale with medium TOC content has higher hydrocarbon generation potential than the laminated shale with low TOC content, and the generated oil migrates a short distance to the sandy laminae to retain and accumulate in situ. Ultra-low permeability massive mudstone facies as the top and bottom seals, good preservation conditions, high pressure coefficient, and lamellar shale facies with high TOC are the conditions for "lamellation type" shale oil enrichment in some sequences and zones. The sequence and zone with laminated shale of medium TOC content in oil window and with micro-migration of expelled hydrocarbon are the condition for the enrichment of "lamination type" shale oil. The tight oil and "lamination type" shale oil are in contiguous distribution.
文摘In this study, freeze - fractured specimens of Allium cepa root tip meristems were examined under the scanning electron microscope (SEM). This technique permitted the visualization of the outer membrane of the nuclear envelope with nuclear pore complexes and polyribosomes. Some of the cell nuclei prepared with this procedure had fissures of various widths on their nuclear envelopes through which the nuclear lamina-like filaments (LLF) underneath the nucleoplasmic side of the envelopes were clearly visible. The diameters of these filaments varied between 25 and 125 nm. Many of the LLFs showed granular thickenings at places, and were attached to the inner surface of nuclear envelope in some regions. Similar LLFs were also seen at the peripheries of the freeze -fractured faces of nuclei. Meanwhile,the spatial relation between the nuclear matrix filaments (NMF) and other nuclear structures (nucleoli, chromatin and peripheral lamina - like filaments) was revealed in these fractured preparations. In addition, the methods and techniques in studying the nuclear lamina morphology and the roles played by NMFs in activities of various nuclear structures were discussed in brief.
