Increasingly severe electromagnetic pollution is now in urgent need of materials with lightweight,excellent flame retardancy,and outstanding electromagnetic interference shielding effectiveness(EMI SE).Renewable sourc...Increasingly severe electromagnetic pollution is now in urgent need of materials with lightweight,excellent flame retardancy,and outstanding electromagnetic interference shielding effectiveness(EMI SE).Renewable source-derived carbon foams and graphene have attracted extensive attention due to their 3D porous structure and remarkable electrical conductivity().In this work,annealed sugarcane(ASC)was prepared by removal of lignin from sugarcane via hydrothermal reaction,followed by annealing treatment.Then graphene oxide(GO)was filled by vacuum-assisted impregnation process and thermally annealed to obtain the ASC/reduced graphene oxide(rGO)hybrid foams.When the loading of rGO is 17 wt.%,the ASC/rGO hybrid foam(density,of 0.047 g/cm^3)exhibits the optimal of 6.0 S/cm,EMI SE of 53 dB,specific SE(SSE=SE/)/thickness(t)of 3830 dB·cm^2/g,and compressive strength of 1.33 MPa,which is 76%,36%,13%and 6%higher than those of ASC,respectively.Moreover,ASC/rGO presents excellent flame retardancy,thermal stability,and heat insulation,which remains constant under burning on an alcohol lamp and presents low thermal conductivity of 115.19 mW(m·K),close to the requirement for heat insulation.Synergistic effect of ASC and rGO not only significantly increase of ASC/rGO,but fully utilizes the capability of ASC and rGO to attenuate electromagnetic waves by virtue of unique porous structures and abundant interfaces.Such kind of lightweight EMI materials with excellent mechanical property,shielding performance,flame retardancy,and heat insulation is expected to tackle the key scientific and technical bottleneck problems of EMI materials,and will greatly expand the application of carbon nanomaterials in the field of aerospace industry.展开更多
为了更好地分析高压直流输电系统(high-voltage direct current,HVDC)接地极对附近金属设施(如管道)的电磁传导干扰水平,首先介绍和讨论直流接地极在正常和单极运行时对邻近管道的传导干扰影响,之后着重研究影响干扰程度的主要因素以及...为了更好地分析高压直流输电系统(high-voltage direct current,HVDC)接地极对附近金属设施(如管道)的电磁传导干扰水平,首先介绍和讨论直流接地极在正常和单极运行时对邻近管道的传导干扰影响,之后着重研究影响干扰程度的主要因素以及各种相应防护措施的效果;并结合一具体工程实例,定量分析了土壤结构、接地极与管道间的距离对传导干扰水平的影响程度;最后对比分析了常用防护缓解措施的缓解效果。对于更好地了解相邻管道受HVDC电极的电磁干扰机理,以及未来进一步研究HVDC高压直流极对临近管道电磁干扰的影响提供参考。展开更多
The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In th...The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.展开更多
An electromagnetic interference （EMI） shielding composite based on ultrahigh molecular weight polyethylene （UHMWPE） loaded with economical graphite-carbon black （CB） hybrid fillers was prepared via a green and f...An electromagnetic interference （EMI） shielding composite based on ultrahigh molecular weight polyethylene （UHMWPE） loaded with economical graphite-carbon black （CB） hybrid fillers was prepared via a green and facile methodology, i.e., high-speed mechanical mixing combined with hot compression thus avoiding the assistance of the intensive ultrasound dispersion in volatile organic solvents. In this composite, the graphite-CB hybrid fillers were selectively distributed in the interfacial regions of UHMWPE domains resulting a typical segregated structure. Thanks to the specific morphology of segregated conductive networks along with the synergetic effect of large-sized graphite flakes and small-sized CB nanoparticles, a low filler loading of 7.7 vol% （15 wt%） yielded the graphite-CB/UHMWPE composites with a satisfactory electrical conductivity of 33.9 S/m and a superior shielding effectiveness of 40.2 dB, manifesting the comparable value of the pricey large-aspect-ratio carbon nanofillers （e.g., carbon nanotubes and graphene nanosheets） based polymer composites. More interestingly, with the addition of 15 wt% graphite-CB （1/3, W/W） hybrid fillers, the tensile strength and elongation at break of the composite reached 25.3 MPa and 126%, respectively; with a remarkable increase of 58.1% and 2420% over the conventional segregated graphite/UHMWPE composites. The mechanical reinforcement could be attributed to the favor of the small-sized CB particles in the polymer molecular diffusion between UHMWPE domains which in tuna provided a stronger interfacial adhesion. This work provides a facile, green and affordable strategy to obtain the polymer composites with high electrical conductivity, efficient EMI shielding, and balanced mechanical performance.展开更多
The design and fabrication of electromagnetic interference shielding films with a novel structure to eliminate undesirable electromagnetic pollution is an important research direction.However,it is still a challenge t...The design and fabrication of electromagnetic interference shielding films with a novel structure to eliminate undesirable electromagnetic pollution is an important research direction.However,it is still a challenge to combine and organize nanofillers in different dimensions into the structured network in polymer-based electromagnetic interference(EMI)shielding composites.In this work,a sandwich struc-ture polyimide(PI)composite film with alternative 2D-MXene network and 1D-Silver nanowires(Ag NWs)network was prepared through the“electrospinning-immersion-hot pressing”method.With the increase of Ag NWs content,the EMI shielding effectiveness(SE)gradually increases while maintaining good flexibility and mechanical robustness.The EMI SE and the tensile strength of 150μm thick sand-wich composite film can reach up to 79.54 dB and 39.82 MPa,respectively.The prepared flexible and robust PI composite film with a sandwich structure has high EMI SE with less metal content,which can provide guidelines for the development of high-performance EMI polymeric films with potentials in wearable devices and equipment.展开更多
Biological structural materials,despite consisting of limited kinds of compounds,display multifunctionalities due to their complex hierarchical architectures.While some biomimetic strategies have been applied in artif...Biological structural materials,despite consisting of limited kinds of compounds,display multifunctionalities due to their complex hierarchical architectures.While some biomimetic strategies have been applied in artificial materials to enhance their mechanical stability,the simultaneous optimization of other functions along with the mechanical properties via biomimetic designs has not been thoroughly investigated.Herein,iron oxide/carbon nanotube(CNT)-based artificial nacre with both improved mechanical and electromagnetic interference(EMI)shielding performance is fabricated via the mineralization of Fe_(3)O_(4)onto a CNTincorporated matrix.The micro-and nano-structures of the artificial nacre are similar to those of natural nacre,which in turn improves its mechanical properties.The alternating electromagnetic wave-reflective CNT layers and the wave-absorptive iron oxide layers can improve the multiple reflections of the waves on the surfaces of the reflection layers,which then allows sufficient interactions between the waves and the absorption layers.Consequently,compared with the reflection-dependent EMI-shielding of the non-structured material,the artificial nacre exhibits strong absorption-dependent shielding behavior even with a very low content of wave-absorptive phase.Owing to the high mechanical stability,the shielding effectiveness of the artificial nacre that deeply cut by a blade is still maintained at approximately 70%−96%depending on the incident wave frequency.The present work provides a new way for designing structural materials with concurrently enhanced mechanical and functional properties,and a path to combine structural design and intrinsic properties of specific materials via a biomimetic strategy.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51973173)the Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province of China(No.2019JC-11)the Space Supporting Fund from China Aerospace Science and Industry Corporation(No.2020-HT-XG and 2019-HT-XG)。
文摘Increasingly severe electromagnetic pollution is now in urgent need of materials with lightweight,excellent flame retardancy,and outstanding electromagnetic interference shielding effectiveness(EMI SE).Renewable source-derived carbon foams and graphene have attracted extensive attention due to their 3D porous structure and remarkable electrical conductivity().In this work,annealed sugarcane(ASC)was prepared by removal of lignin from sugarcane via hydrothermal reaction,followed by annealing treatment.Then graphene oxide(GO)was filled by vacuum-assisted impregnation process and thermally annealed to obtain the ASC/reduced graphene oxide(rGO)hybrid foams.When the loading of rGO is 17 wt.%,the ASC/rGO hybrid foam(density,of 0.047 g/cm^3)exhibits the optimal of 6.0 S/cm,EMI SE of 53 dB,specific SE(SSE=SE/)/thickness(t)of 3830 dB·cm^2/g,and compressive strength of 1.33 MPa,which is 76%,36%,13%and 6%higher than those of ASC,respectively.Moreover,ASC/rGO presents excellent flame retardancy,thermal stability,and heat insulation,which remains constant under burning on an alcohol lamp and presents low thermal conductivity of 115.19 mW(m·K),close to the requirement for heat insulation.Synergistic effect of ASC and rGO not only significantly increase of ASC/rGO,but fully utilizes the capability of ASC and rGO to attenuate electromagnetic waves by virtue of unique porous structures and abundant interfaces.Such kind of lightweight EMI materials with excellent mechanical property,shielding performance,flame retardancy,and heat insulation is expected to tackle the key scientific and technical bottleneck problems of EMI materials,and will greatly expand the application of carbon nanomaterials in the field of aerospace industry.
文摘为了更好地分析高压直流输电系统(high-voltage direct current,HVDC)接地极对附近金属设施(如管道)的电磁传导干扰水平,首先介绍和讨论直流接地极在正常和单极运行时对邻近管道的传导干扰影响,之后着重研究影响干扰程度的主要因素以及各种相应防护措施的效果;并结合一具体工程实例,定量分析了土壤结构、接地极与管道间的距离对传导干扰水平的影响程度;最后对比分析了常用防护缓解措施的缓解效果。对于更好地了解相邻管道受HVDC电极的电磁干扰机理,以及未来进一步研究HVDC高压直流极对临近管道电磁干扰的影响提供参考。
基金This work was supported by the National Natural Science Foundation of China(No.U21A2093)the Anhui Provincial Natural Science Foundation(No.2308085QE146)the National Natural Science Foundation of Jiangsu Province(No.BK20210894).
文摘The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.
基金financially supported by the National Natural Science Foundation of China(Nos.51421061,51120135002 and 51473102)the Innovation Team Program of Science and Technology Department of Sichuan Province(No.2014TD0002)the China Postdoctoral Science Foundation(Nos.2015M572474 and 2016T90848)
文摘An electromagnetic interference （EMI） shielding composite based on ultrahigh molecular weight polyethylene （UHMWPE） loaded with economical graphite-carbon black （CB） hybrid fillers was prepared via a green and facile methodology, i.e., high-speed mechanical mixing combined with hot compression thus avoiding the assistance of the intensive ultrasound dispersion in volatile organic solvents. In this composite, the graphite-CB hybrid fillers were selectively distributed in the interfacial regions of UHMWPE domains resulting a typical segregated structure. Thanks to the specific morphology of segregated conductive networks along with the synergetic effect of large-sized graphite flakes and small-sized CB nanoparticles, a low filler loading of 7.7 vol% （15 wt%） yielded the graphite-CB/UHMWPE composites with a satisfactory electrical conductivity of 33.9 S/m and a superior shielding effectiveness of 40.2 dB, manifesting the comparable value of the pricey large-aspect-ratio carbon nanofillers （e.g., carbon nanotubes and graphene nanosheets） based polymer composites. More interestingly, with the addition of 15 wt% graphite-CB （1/3, W/W） hybrid fillers, the tensile strength and elongation at break of the composite reached 25.3 MPa and 126%, respectively; with a remarkable increase of 58.1% and 2420% over the conventional segregated graphite/UHMWPE composites. The mechanical reinforcement could be attributed to the favor of the small-sized CB particles in the polymer molecular diffusion between UHMWPE domains which in tuna provided a stronger interfacial adhesion. This work provides a facile, green and affordable strategy to obtain the polymer composites with high electrical conductivity, efficient EMI shielding, and balanced mechanical performance.
基金the Fund of Natural Science Founda-tion of Shaanxi Provincial(No.2021JQ-111)the Fund of Basic and Applied Fundamental Research of Guangdong Provincial(No.2020A1515110861).
文摘The design and fabrication of electromagnetic interference shielding films with a novel structure to eliminate undesirable electromagnetic pollution is an important research direction.However,it is still a challenge to combine and organize nanofillers in different dimensions into the structured network in polymer-based electromagnetic interference(EMI)shielding composites.In this work,a sandwich struc-ture polyimide(PI)composite film with alternative 2D-MXene network and 1D-Silver nanowires(Ag NWs)network was prepared through the“electrospinning-immersion-hot pressing”method.With the increase of Ag NWs content,the EMI shielding effectiveness(SE)gradually increases while maintaining good flexibility and mechanical robustness.The EMI SE and the tensile strength of 150μm thick sand-wich composite film can reach up to 79.54 dB and 39.82 MPa,respectively.The prepared flexible and robust PI composite film with a sandwich structure has high EMI SE with less metal content,which can provide guidelines for the development of high-performance EMI polymeric films with potentials in wearable devices and equipment.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Nos.XDB 0470303 and XDB 0450402)the National Key Research and Development Program of China(Nos.2018YFE0202201 and 2021YFA0715700)+2 种基金the National Natural Science Foundation of China(Nos.22293044,U1932213,and 22305240)the New Cornerstone Investigator Program.Y.-F.M.acknowledges the Major Basic Research Project of Anhui Province(No.2023z04020009)the Double First-Class University Construction Fund from USTC(No.YD2060002037).
文摘Biological structural materials,despite consisting of limited kinds of compounds,display multifunctionalities due to their complex hierarchical architectures.While some biomimetic strategies have been applied in artificial materials to enhance their mechanical stability,the simultaneous optimization of other functions along with the mechanical properties via biomimetic designs has not been thoroughly investigated.Herein,iron oxide/carbon nanotube(CNT)-based artificial nacre with both improved mechanical and electromagnetic interference(EMI)shielding performance is fabricated via the mineralization of Fe_(3)O_(4)onto a CNTincorporated matrix.The micro-and nano-structures of the artificial nacre are similar to those of natural nacre,which in turn improves its mechanical properties.The alternating electromagnetic wave-reflective CNT layers and the wave-absorptive iron oxide layers can improve the multiple reflections of the waves on the surfaces of the reflection layers,which then allows sufficient interactions between the waves and the absorption layers.Consequently,compared with the reflection-dependent EMI-shielding of the non-structured material,the artificial nacre exhibits strong absorption-dependent shielding behavior even with a very low content of wave-absorptive phase.Owing to the high mechanical stability,the shielding effectiveness of the artificial nacre that deeply cut by a blade is still maintained at approximately 70%−96%depending on the incident wave frequency.The present work provides a new way for designing structural materials with concurrently enhanced mechanical and functional properties,and a path to combine structural design and intrinsic properties of specific materials via a biomimetic strategy.
