Mg/Cu bimetal composites were prepared by compound casting method, and the microstructure evolution, phase constitution and bonding strength at the interface were investigated.It is found that a good metallurgical bon...Mg/Cu bimetal composites were prepared by compound casting method, and the microstructure evolution, phase constitution and bonding strength at the interface were investigated.It is found that a good metallurgical bonding can be achieved at the interface of Mg and Cu,which consists of two sub-layers,i.e.,layer I with 30μm on the copper side composed of Mg2Cu matrix phase, on which a small amount of dendritic MgCu2 phase was randomly distributed;layerⅡ with 140μm on the magnesium side made up of the lamellar nano-eutectic network Mg2Cu+(Mg) and a small amount of detached Mg2Cu phase. The average interfacial shear strength of the bimetal composite is measured to be 13 MPa.This study provides a new fabrication process for the application of Mg/Cu bimetal composites as the hydrogen storage materials.展开更多
Ti-6Al-4V/Al7050 joints were fabricated by a method of insert molding and corresponding interfacial microstructure and mechanical properties were investigated. The interfacial thickness was sensitive to holding temper...Ti-6Al-4V/Al7050 joints were fabricated by a method of insert molding and corresponding interfacial microstructure and mechanical properties were investigated. The interfacial thickness was sensitive to holding temperature during the first stage, and a good metallurgical bonding interface with a thickness of about 90 μm can be obtained at 750°C. X-ray diffraction, transmission electron microscopy, and thermodynamic analyses showed that the interface mainly contained intermetallic compound TiAl_3 and Al matrix. The joints featured good mechanical properties, i.e., shear strength of 154 MPa, tensile strength of 215 MPa, and compressive strength of 283 MPa, which are superior to those of joints fabricated by other methods. Coherent boundaries between Al/TiAl_3 and TiAl_3/Ti were confirmed to contribute to outstanding interfacial mechanical properties and also explained constant fracture occurrence in the Al matrix. Follow-up studies should focus on improving mechanical properties of the Al matrix by deformation and heat treatment.展开更多
Interfacial structure greatly affects the mechanical properties of laminated plates.However,the critical material properties that impact the interfacial morphology,appearance,and associated bonding mechanism of explos...Interfacial structure greatly affects the mechanical properties of laminated plates.However,the critical material properties that impact the interfacial morphology,appearance,and associated bonding mechanism of explosive welded plates are still unknown.In this paper,the same base plate(AZ31B alloy)and different flyer metals(aluminum alloy,copper,and stainless steel)were used to investigate interfacial morphology and structure.SEM and TEM results showed that typical sine wave,wave-like,and half-wave-like interfaces were found at the bonding interfaces of Al/Mg,Cu/Mg and SS/Mg clad plates,respectively.The different interfacial morphologies were mainly due to the differences in hardness and yield strength between the flyer and base metals.The results of the microstructural distribution at the bonding interface indicated metallurgical bonding,instead of the commonly believed solid-state bonding,in the explosive welded clad plate.In addition,the shear strength of the bonding interface of the explosive welded Al/Mg,Cu/Mg and SS/Mg clad plates can reach up to 201.2 MPa,147.8 MPa,and 128.4 MPa,respectively.The proposed research provides the design basis for laminated composite metal plates fabrication by explosive welding technology.展开更多
基金Project(51671017)supported by the National Natural Science Foundation of ChinaProject(FRF-GF-17-B3)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project supported by the Beijing Laboratory of Metallic Materials and Processing for Modern Transportation,ChinaProject(SKLSP201835)supported by the Fund of the State Key Laboratory of Solidification Processing in NWPU,China
文摘Mg/Cu bimetal composites were prepared by compound casting method, and the microstructure evolution, phase constitution and bonding strength at the interface were investigated.It is found that a good metallurgical bonding can be achieved at the interface of Mg and Cu,which consists of two sub-layers,i.e.,layer I with 30μm on the copper side composed of Mg2Cu matrix phase, on which a small amount of dendritic MgCu2 phase was randomly distributed;layerⅡ with 140μm on the magnesium side made up of the lamellar nano-eutectic network Mg2Cu+(Mg) and a small amount of detached Mg2Cu phase. The average interfacial shear strength of the bimetal composite is measured to be 13 MPa.This study provides a new fabrication process for the application of Mg/Cu bimetal composites as the hydrogen storage materials.
基金financially supported by the National Natural Science Foundation of China (Nos.51671017 and 51471024)Fundamental Research Funds for the Central Universities (No.FRFBR-15-078A)
文摘Ti-6Al-4V/Al7050 joints were fabricated by a method of insert molding and corresponding interfacial microstructure and mechanical properties were investigated. The interfacial thickness was sensitive to holding temperature during the first stage, and a good metallurgical bonding interface with a thickness of about 90 μm can be obtained at 750°C. X-ray diffraction, transmission electron microscopy, and thermodynamic analyses showed that the interface mainly contained intermetallic compound TiAl_3 and Al matrix. The joints featured good mechanical properties, i.e., shear strength of 154 MPa, tensile strength of 215 MPa, and compressive strength of 283 MPa, which are superior to those of joints fabricated by other methods. Coherent boundaries between Al/TiAl_3 and TiAl_3/Ti were confirmed to contribute to outstanding interfacial mechanical properties and also explained constant fracture occurrence in the Al matrix. Follow-up studies should focus on improving mechanical properties of the Al matrix by deformation and heat treatment.
基金Supported by National Natural Science Foundation of China(Grant Nos.51805359,51904206,51375328)Major program of national natural science foundation of China(U1710254),China Postdoctoral Science Foundation(Grant No.2018M631772)+2 种基金Shanxi Provincial Natural Science Foundation of China(Grant No.201901D211015)Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi Province(STIP)(Grant No.2019L0333)Central Special Fund for Guiding Local Science and Technology Development(YDZX20191400002149).
文摘Interfacial structure greatly affects the mechanical properties of laminated plates.However,the critical material properties that impact the interfacial morphology,appearance,and associated bonding mechanism of explosive welded plates are still unknown.In this paper,the same base plate(AZ31B alloy)and different flyer metals(aluminum alloy,copper,and stainless steel)were used to investigate interfacial morphology and structure.SEM and TEM results showed that typical sine wave,wave-like,and half-wave-like interfaces were found at the bonding interfaces of Al/Mg,Cu/Mg and SS/Mg clad plates,respectively.The different interfacial morphologies were mainly due to the differences in hardness and yield strength between the flyer and base metals.The results of the microstructural distribution at the bonding interface indicated metallurgical bonding,instead of the commonly believed solid-state bonding,in the explosive welded clad plate.In addition,the shear strength of the bonding interface of the explosive welded Al/Mg,Cu/Mg and SS/Mg clad plates can reach up to 201.2 MPa,147.8 MPa,and 128.4 MPa,respectively.The proposed research provides the design basis for laminated composite metal plates fabrication by explosive welding technology.
