磁体的注射成形是一种高效生产的近净成形技术。为了制备出具有较好综合性能的注射成形粘结钕铁硼永磁材料,研究了粘结剂对注射成形磁体的磁性能、加工性能及力学性能的影响;分析了硅烷系列的偶联剂、复合润滑剂和抗氧剂等添加剂对注射...磁体的注射成形是一种高效生产的近净成形技术。为了制备出具有较好综合性能的注射成形粘结钕铁硼永磁材料,研究了粘结剂对注射成形磁体的磁性能、加工性能及力学性能的影响;分析了硅烷系列的偶联剂、复合润滑剂和抗氧剂等添加剂对注射成形磁体性能的影响。结果表明,用MQP-B快淬钕铁硼磁粉和尼龙12粘结剂制备出了剩余磁感应强度为0.539 T,磁感矫顽力为345.37 k A/m,内禀矫顽力为681.02 k A/m,最大磁能积为47.37 k J/m3的注射成形钕铁硼磁体。展开更多
The desulfurization of hot metal by the mono-injection of lime powder and the co-injection of lime, calcium carbide and magnesium powders is mathematically modeled. The mono-injection model is derived from the continu...The desulfurization of hot metal by the mono-injection of lime powder and the co-injection of lime, calcium carbide and magnesium powders is mathematically modeled. The mono-injection model is derived from the continuity equation and is validated using experimental results and data previously reported in the literature. The co-injection model and the rate constant of the injected mixture are determined from the molar fractions and rate constants of the individual powders. The effect of the lime content of the mixture on the desulfurization dynamics is studied and discussed.展开更多
The kinetic model for desulfurization using CaO-based powder injection has been proposed, which accords with the actual process of the experiment. For the model, a comparison between CaO-based flux and Mg-based flux w...The kinetic model for desulfurization using CaO-based powder injection has been proposed, which accords with the actual process of the experiment. For the model, a comparison between CaO-based flux and Mg-based flux was made and the results show that the desulfurization rate of the Mg-based flux is far more than that of CaO-based flux. On the basis of the model calculation, on comparison of CaO-CaF2 flux and calcium aluminate flux, the desulfurization rates of the two fluxes are close to each other. In addition, the effects of some operational factors on the kinetics of desulfurization are discussed.展开更多
文摘磁体的注射成形是一种高效生产的近净成形技术。为了制备出具有较好综合性能的注射成形粘结钕铁硼永磁材料,研究了粘结剂对注射成形磁体的磁性能、加工性能及力学性能的影响;分析了硅烷系列的偶联剂、复合润滑剂和抗氧剂等添加剂对注射成形磁体性能的影响。结果表明,用MQP-B快淬钕铁硼磁粉和尼龙12粘结剂制备出了剩余磁感应强度为0.539 T,磁感矫顽力为345.37 k A/m,内禀矫顽力为681.02 k A/m,最大磁能积为47.37 k J/m3的注射成形钕铁硼磁体。
文摘The desulfurization of hot metal by the mono-injection of lime powder and the co-injection of lime, calcium carbide and magnesium powders is mathematically modeled. The mono-injection model is derived from the continuity equation and is validated using experimental results and data previously reported in the literature. The co-injection model and the rate constant of the injected mixture are determined from the molar fractions and rate constants of the individual powders. The effect of the lime content of the mixture on the desulfurization dynamics is studied and discussed.
文摘The kinetic model for desulfurization using CaO-based powder injection has been proposed, which accords with the actual process of the experiment. For the model, a comparison between CaO-based flux and Mg-based flux was made and the results show that the desulfurization rate of the Mg-based flux is far more than that of CaO-based flux. On the basis of the model calculation, on comparison of CaO-CaF2 flux and calcium aluminate flux, the desulfurization rates of the two fluxes are close to each other. In addition, the effects of some operational factors on the kinetics of desulfurization are discussed.
