Influence of vanadium and/or niobium additions on delayed fracture behavior in high strength spring steel was studied by hydrogen permeation method and slow strain rate technique （8SRT）, and its mechanism was analyz...Influence of vanadium and/or niobium additions on delayed fracture behavior in high strength spring steel was studied by hydrogen permeation method and slow strain rate technique （8SRT）, and its mechanism was analyzed. The results show that apparent diffusion coefficient of hydrogen in microalloyed spring steels Nb-V-steel and Nb-steel is lower than that in non-microalloyed steel 60Si2MnA. Percentage of strength reduction in SSRT in air after precharged hydrogen of the microalloyed steels is smaller than that of 60Si2MnA. Addition of the microalloys changes the fracture characteristics. Thence, vanadium and/or niobium additions are a very effective and economy means to improve the hydrogen-induced delayed fracture resistance of high strength spring steel.展开更多
The change in dislocation configuration ahead of a loaded crack tip before and after charging with hydrogen was in situ investigated in TEM using a special constant deflection loading device The results showed that hy...The change in dislocation configuration ahead of a loaded crack tip before and after charging with hydrogen was in situ investigated in TEM using a special constant deflection loading device The results showed that hydrogen could facilitate dislocation emission, multiplication and motion The change in displacement field ahead of a loaded notch tip for a bulk specimen before and after charging with hydrogen was in situ measured by the laser moire interferometer technique. The results showed that hydrogen could enlarge the plastic zone and increase the plastic strain The in situ observation in TEM showed that when hydrogen-enhanced dislocation emission and motion reached a critical condition, a nanocrack of hydrogen-induced cracking ( HIC) would nucleate in the dislocation-free zone (DFZ) or at the main crack tip. The reasons for hydrogen-enhanced dislocation emission, multiplication and motion, and the mechanisms of nucleation of HIC have been discussed展开更多
Cracks and fractures occur during the assembly process to a type of torsional springs used in the aviation mechanism. Besides visual examination, other experimental techniques used for the investigation are： 1） frac...Cracks and fractures occur during the assembly process to a type of torsional springs used in the aviation mechanism. Besides visual examination, other experimental techniques used for the investigation are： 1） fracture characteristics, damage morphology and fractography by scanning electron microscopy （SEM）, 2） spectrum analysis of covering, 3） metallographic observation of cracks and 4） hydrogen content testing. The results are obtained through the analysis of manufacture process and experimental data. Since no changes of microstructure are found, failures are irrelevant to the material. The cracks and fractures initiate on the inner surface, cracks initiate before the cadmium plating and after the winding. No obvious stress corrosion cracks are found near the crack source region. The opening direction of cracks is consistent with the residual tensile stress of the spring inner surface, and the springs are easy to contact hydrogen media between the spring winding and the cadmium plating. The cracks are caused by hydrogen-induced delayed cracking under the action of the residual tensile stress and hydrogen.展开更多
We investigated the effect of nanosized NbC precipitates on hydrogen-induced cracking(HIC)of high-strength low-alloy steel by conducting slow-strain-rate tensile tests(SSRT)and performing continuous hydrogen charging ...We investigated the effect of nanosized NbC precipitates on hydrogen-induced cracking(HIC)of high-strength low-alloy steel by conducting slow-strain-rate tensile tests(SSRT)and performing continuous hydrogen charging and fracture analysis.The results reveal that the HIC resistance of Nb-bearing steel is obviously superior to that of Nb-free steel,with the fractured Nb-bearing steel in the SSRT exhibiting a smaller ratio of elongation reduction(Iδ).However,as the hydrogen traps induced by NbC precipitates approach hydrogen saturation,the effect of the precipitates on the HIC resistance attenuate.We speculate that the highly dispersed nanosized NbC precipitates act as irreversible hydrogen traps that hinder the accumulation of hydrogen at potential crack nucleation sites.In addition,much like Nb-free steel,the Nb-bearing steel exhibits both H-solution strengthening and the resistance to HIC.展开更多
The hydrogen embrittlement(HE)fracture of advanced high-strength steels used in lightweight automobiles has received increasing public attention.The source,transmission,and movement of hydrogen,characterization parame...The hydrogen embrittlement(HE)fracture of advanced high-strength steels used in lightweight automobiles has received increasing public attention.The source,transmission,and movement of hydrogen,characterization parameters,and test methods of HE,as well as the characteristics and path of HE fractures,are introduced.The mechanisms and modes of crack propagation of HE and hydrogen-induced delayed fracture are reviewed.The recent progress surrounding micro and macro typical fracture characteristics and the influencing factors of HE are discussed.Finally,methods for improving HE resistance can be summarized as follows:(1)reducing crystalline grain and inclusion sizes(oxides,sulfides,and titanium nitride),(2)controlling nano-precipitates(niobium carbide,titanium carbide,and composite precipitation),and(3)increasing residual austenite content under the reasonable tension strength of steel.展开更多
The HE (hydrogen embrittlement) behavior of two kinds of austenitic stee Cr21Ni6Mn9 and 1Cr18Ni9Ti is reprted in this paper. The factors (temperc-ture/strain rate/stress concentration coefficient and purity of hydroge...The HE (hydrogen embrittlement) behavior of two kinds of austenitic stee Cr21Ni6Mn9 and 1Cr18Ni9Ti is reprted in this paper. The factors (temperc-ture/strain rate/stress concentration coefficient and purity of hydrogen) are restricted to the severe conditions under which HE is easy to occur. The concentmtion of in-ternal hydrogen in samples is changed by varying the time during which samples are placed in 24 MPa hydrogen at 473 K Then the tensile properties of the samples are tested. The results indicate that the degree of the hydrogen-induced plastic loss (L)of Cr21Ni6Mn9 is different with the internal hydrogen(CH). Howeven even when CH is as high as 70 PPm L is 15% and the fracture may be explained as a larpe amount of internal hydrogen hinders the cross-slip of dislocations when the steel is deforming.For the metastable steel 1Cr18Ni9Ti the hydrogen-induced plastic loss is severer than that of Cr21Ni6Mn9. When CH is 40 PPm its L is as high as 42%. The mechanism may be explained as a larpe amount of hyderpen decreases the stacking fault enerpy and brittle ε-phase is produed in the high CH areas.展开更多
The synergistic effects of Nb and Mo on hydrogen-induced cracking(HIC)of pipeline steels were studied experimentally and numerically.The results showed that Mo was primarily segregated at grain-boundaries(GBs)or solid...The synergistic effects of Nb and Mo on hydrogen-induced cracking(HIC)of pipeline steels were studied experimentally and numerically.The results showed that Mo was primarily segregated at grain-boundaries(GBs)or solid-dissolved in the matrix,while most Nb and a small amount of Mo formed dis-persed(Nb,Mo)C nano-precipitates and refined the microstructure.Compared with Nb alloying,the multi-ple additions of Nb-Mo played dual roles in affecting H diffusion:primarily,the H-traps densities such as GBs,precipitates,and solute Mo atoms increased,providing an advantage;however,Mo slightly reduced the H-trapping capacity of precipitates,playing an adverse role.Nonetheless,the beneficial effects far outweighed the adverse effects,thereby reducing H diffusivity and inhibiting crack initiation.Addition-ally,Nb and Mo hindered crack propagation synergistically as follows:(i)Mo enhanced GB cohesion by repelling H,impeding intergranular cracking and hydrogen-enhanced decohesion(HEDE);(ii)Nb reduced the proportion of3/high-angle grain boundaries,increasing cracking resistance;(iii)(Nb,Mo)C precip-itates impeded H-dislocation interactions,reducing the hydrogen-enhanced localized plasticity(HELP).展开更多
The role of atomic hydrogen and hydrogen-induced martensites in hydrogen embrittlement in slow strain rate tensile tests and hydrogen-induced delayed cracking (HIC) in sustained load tests for type 304 L stainless ste...The role of atomic hydrogen and hydrogen-induced martensites in hydrogen embrittlement in slow strain rate tensile tests and hydrogen-induced delayed cracking (HIC) in sustained load tests for type 304 L stainless steel was quantitatively studied. The results indicated that hydrogen-induced martensites formed when hydrogen concentration C 0 exceeded 30 ppm, and increased with an increase in C 0, i.e. M(vol%)=62–82.5 exp (?C 0/102). The relative plasticity loss caused by the martensites increased linearly with increasing amount of the martensites, i.e. l δ(M), %=0.45 M (vol %)=27.9?37.1 exp(?C0/102). The plasticity loss caused by atomic hydrogen l δ(H) increased with an increase in C 0 and reached a saturation value l δ(H)max=40% when C 0>100 ppm. l δ(H) decreased with an increase in strain rate $\dot \varepsilon $ , i.e. l δ(H), $\% = - 21.9 - 9.9\dot \varepsilon $ , and was zero when $\dot \varepsilon \geqslant \dot \varepsilon _c = 0.032/s$ . HIC under sustained load was due to atomic hydrogen, and the threshold stress intensity for HIC decreased linearly with in C 0, i.e. K IH (Mpam1/2)=91.7?10.1 In C 0 (ppm). The fracture surface of HIC was dimple if K 1 was high or/and C 0 was low, otherwise it was quasi-cleavage. The boundary line between ductile and brittle fracture surface was K 1-54+25exp(?C 0/153)=0.展开更多
The effect of hydrogen on the fractttre behaviors of Incoloy alloy 825 was investigated by means of slow strain rate testing （SSRT） Hydrogen was introduced into the sample by electrochemical charging. The results sh...The effect of hydrogen on the fractttre behaviors of Incoloy alloy 825 was investigated by means of slow strain rate testing （SSRT） Hydrogen was introduced into the sample by electrochemical charging. The results show that surface microcracks form gradually during ag- ing at room temperature when desorption of hydrogen takes place after hydrogen charging at a current density of 5 mA/cm^2 for 24 h. SSRT shows that the increase of ductility loss is significantly obvious as the hydrogen charging current density increases. Scanning electron microscopy （SEM） images reveal ductile fracture in the pre-charged sample with low current densities, while the fracture includes small quasi-cleavage regions and tends to be brittle fracture as the hydrogen charging current density increases to 5 mA/cm^2.展开更多
The hydrogen-induced delayed fracture(HIDF)behavior of a 1300-MPa-grade high-strength bolt steel 42CrMoV containing 0.42 wt.%Cu was investigated by constant load tensile test in a pH 3.5 Walpole solution.It is shown t...The hydrogen-induced delayed fracture(HIDF)behavior of a 1300-MPa-grade high-strength bolt steel 42CrMoV containing 0.42 wt.%Cu was investigated by constant load tensile test in a pH 3.5 Walpole solution.It is shown that the addition of Cu is beneficial to enhance the HIDF resistance by~13%.The observation of the fracture surface revealed that the area fraction of brittle crack initiation zone decreased remarkably for the Cu-added steel.Both the corrosion pit depth and the corrosion rate of the Cu-added steel in the Walpole solution are notably decreased,which is primarily because of the formation of a Cu-rich protective compact rust layer and slightly higher corrosion potential.As a result,the absorbed hydrogen content in that solution was also decreased by~21%.It is concluded that the improvement in the HIDF resistance of the tested steel is primarily due to the increase in corrosion resistance and resultant decrease in the absorbed diffusible hydrogen content in the acidic condition.展开更多
In this study,hydrogen-induced cracking（HIC） and sulfide stress corrosion cracking（SSC） behaviors of highstrength pipeline steels in four different strength grades（X70,X80,X90 and X100） with the microstructure o...In this study,hydrogen-induced cracking（HIC） and sulfide stress corrosion cracking（SSC） behaviors of highstrength pipeline steels in four different strength grades（X70,X80,X90 and X100） with the microstructure of acicular ferrite were estimated.The results showed that both of X70 and X80 steels exhibited better HIC resistance,and their susceptibility to HIC increased with the strength grade.HIC parameters,including cracking length ratio,cracking thickness ratio（CTR） and cracking sensitivity ratio,were all increased,and among these,the CTR increased most,with the increase in the strength grade.HIC was found to initiate and grow along the hard boundaries such as large size martensite/austenite（M/A） islands and bainitic ferrite.In addition,the density of hydrogen-induced blister on the steel surface was increased with the decrease in p H value for the same-grade pipeline steels.SSC susceptibilities of X80,X90 and X90-C were revealed to subsequently decrease,which was related to the large size M/A islands.展开更多
In this paper, the microstructure and hardness of HG980D heat-affected zone （HAZ） at different cooling rate t8/3 were studied, the implant critical fracture stress under three diffusible hydrogen conditions were mea...In this paper, the microstructure and hardness of HG980D heat-affected zone （HAZ） at different cooling rate t8/3 were studied, the implant critical fracture stress under three diffusible hydrogen conditions were measured, and the hydrogeninduced cracking （H1C） fructograph of steel HG980D were analyzed, The experimental results show that martensite exists in HAZ of HG980D till ts/3 ≥ 150 s, the harden quenching tendency of HG980D is greater; The implant critical fracture stress is related to difJhsible hydrogen content significantly, at low hydrogen level, high restraint stress is needed to nucleate HIC, the fraetograph is mainly mierovoid coalescence, bat at high hydrogen level, only small restraint stress can cause H1C occurrence, the fractograph is mainly quasicleavage. It is very important to choose ultra-low hydrogen welding consumable to weld steel HG980D to prevent hydrogen-induced cracking.展开更多
Effects of Mn content on the hydrogen-induced amorphization of LaNi3-xMnx(x=0.0,0.1,0.3 and 0.5) hydrogen storage alloys were studied systematically.All the alloys were prepared using a rapid quenching and annealing m...Effects of Mn content on the hydrogen-induced amorphization of LaNi3-xMnx(x=0.0,0.1,0.3 and 0.5) hydrogen storage alloys were studied systematically.All the alloys were prepared using a rapid quenching and annealing method.As the charging time increased,the hydrogen-induced amorphization occurred gradually in all the compounds for the first cycle.During the discharge process,discharge potential plateau was not observed in LaNi3.As Mn content increased,however,structural changes were inhibited partly,and a p...展开更多
Hydrogen damage in iron or 99.99% purity has been investigated by Doppler broadening measurement.Experimental results show that when the iron is charged with hydrogen in 0.5mol/L H_2SO_4 solution,the critical current ...Hydrogen damage in iron or 99.99% purity has been investigated by Doppler broadening measurement.Experimental results show that when the iron is charged with hydrogen in 0.5mol/L H_2SO_4 solution,the critical current density to cause hydrogen damage is 20mA/cm^2.While a little As_2O_3,saying 250mg/L,added to H_2SO_4 solution,even rather small current density.≤0.2mA/cm^2,would cause hydrogen damage.With the help ofi slow tensile test,it revealed that the hydrogen damage occurred in the specimen may be influential to the subsequent process of deformation and fracture.展开更多
The threshold stress intensity of stress corrosion cracking(SCC) for 40 CrMo steel in 3.5%NaCl solution decreased exponentially with the increase of yield strength.The threshold stress intensity of hydrogen-induced cr...The threshold stress intensity of stress corrosion cracking(SCC) for 40 CrMo steel in 3.5%NaCl solution decreased exponentially with the increase of yield strength.The threshold stress intensity of hydrogen-induced cracking during dynamical charging for 40 CrMo steel decreased linearly with the logarithm of the concentration of diffusible hydrogen.This equation was also applicable to SCC of high strength steel in aqueous solution.The critical hydrogen enrichment concentration necessary for SCC of high strength steel in water decreased exponentially with the increase of yield strength.Based on the results,the relationship between K_(ISCC) and σ_(ys) could be deduced.展开更多
The present work focuses on the structural stability upon hydrogenation of three typical La-Mg-Ni-based alloys： La2 MgNi9, LaaMgNi14 and La4MgNi19. Structural changes during gaseous and electrochemical cycles were ch...The present work focuses on the structural stability upon hydrogenation of three typical La-Mg-Ni-based alloys： La2 MgNi9, LaaMgNi14 and La4MgNi19. Structural changes during gaseous and electrochemical cycles were characterized, and the influence of the structure distortion on the hydrogen storage properties was concerned. Hydrogen-induced amor- phization （HIA） and disproportionation of the three alloys have occurred during both the gaseous and electrochemical cycles. Structural stability of the phase structures in the La-Mg-Ni system is found to follow the order： LaNi5- 〉 （La,Mg）5Ni19 〉 （La,Mg）2Ni7 〉 （La,Mg）Ni3 〉 （La,Mg）Ni2. HIA increases thermal stability of the metal hydrides and difficulty to dehydrogenation and leads to degradation of both the gaseous and electrochemical capacities. Interestingly, LaEMgNi9 with poor stability presents elevated discharge capability even at 60 ℃ which can be attributed to increase in the hydrogen desorption capability and inhibition of the self-discharge induced by severe HIA at higher temperatures. In addition, HIA in the electrochemical reactions is obviously weaker than the extent during the gaseous cycles, which is mainly due to the slower hydrogenation speed. The development of HIA in the gaseous and electrochemical process is considered to follow the direct and gradual modes, respectively.展开更多
The precipitation process of zirconium hydrides induced by stress and strain was investigated by means of electron microscopy in-situ.The precipitating hydrides induced by stress were found to be γ phase with orienta...The precipitation process of zirconium hydrides induced by stress and strain was investigated by means of electron microscopy in-situ.The precipitating hydrides induced by stress were found to be γ phase with orientation relationship of (110)_γ‖(110)_(αZr),(001)_γ‖ (0001)_(αZr) between γ-hydrides and surrounding matrix.The growth rate of γ-hydrides which was much faster along [110] direction brought them in taper shape.After fracture of y-hydrides,a new one will precipitate at the tip of cracks.This is the essential process of hydrogen-induced delayed cracking in Zircaloy.The precipitating hydrides induced by strain were found to be δ phase with both orientation relationships of(111)_δ‖(0001)_(αZr),(110)_δ‖ (110)_(αZr) or (010)_δ‖(0001)_(αZr),(001)_δ‖(110)_(αZr)between δ-hydride and surrounding matrix.The δ-hydrides become much finer as the strain rate increased.展开更多
Hydrogen-induced cracking was investigated by TEM in-situ tension in hydrogenated stainless steel of type 310. It was found experimentally that hydrogen-induced cracking happens via nanovoid nucleation followed by qua...Hydrogen-induced cracking was investigated by TEM in-situ tension in hydrogenated stainless steel of type 310. It was found experimentally that hydrogen-induced cracking happens via nanovoid nucleation followed by quasi-cleavage along {111} planes when C H is higher. Otherwise, in the case of lower C H, hydrogen enhances ductile fracture via hydrogen-enhanced microvoid nucleation, growth and connection. A new model was proposed based on the present experiments. Dislocations break away from defect atmospheres and move away from the DFZ, leaving vacancy and hydrogen clusters along {111} planes. Hydrogen tends to combine with vacancy clusters and initiate nanovoids along {111} planes. Dense nanovoids connect each other, resulting in brittle cracking. Scattered nanovoids grow into microvoids or even macrovoids, leading to ductile fracture.展开更多
By combining the hydrogen-induced local plastic deformation theory with the decohesive theory and the hydrogen pressure theory, a new mechanism of hydrogen-facilitating initiation of voids has been proposed. Through f...By combining the hydrogen-induced local plastic deformation theory with the decohesive theory and the hydrogen pressure theory, a new mechanism of hydrogen-facilitating initiation of voids has been proposed. Through facilitating the local plastic deformation and reducing the cohesive strength, hydrogen promotes both initiating a nanocrack and blunting the nanocrack into a void, resulting in hydrogen-promoting initiation of the void. On the other hand, hydrogen can enhance the stability of the void through reducing the cohesive strength and forming a hydrogen pressure in the void.展开更多
Threshold stress intensity factor of hydrogen-induced cracking (HIC), K IH, of a lead zirconate titanate ferroelectric ceramics (PZT-5) has been measured during dynamic charging with various current densities at const...Threshold stress intensity factor of hydrogen-induced cracking (HIC), K IH, of a lead zirconate titanate ferroelectric ceramics (PZT-5) has been measured during dynamic charging with various current densities at constant load using notched tensile specimens with poling direction parallel or perpendicular to the crack plane. The results show that K IH reveals anisotropy, and the threshold stress intensity factor for the specimen with poling direction parallel to the crack plane, K IH a , is greater than that perpendicular to the crack plane, K IH b , similar to the anisotropy of fracture toughness, K IC. The normalized threshold stress intensity factor of HIC, however, does not reveal anisotropy, and decreass linearly with logarithm of hydrogen concentration, C o, i.e. K IH a /K IC a =K IH b /K IC b =0.4?0.15 In C o. Therefore, the anisotropy of HIC is the same as that of the fracture toughness, and is due to the anisotropy of the stress-induced 90° domain switching.展开更多
基金Item Sponsored by CITIC-CBMM Niobium Steel Research and Development Projects of China(2007RMJS-D031)
文摘Influence of vanadium and/or niobium additions on delayed fracture behavior in high strength spring steel was studied by hydrogen permeation method and slow strain rate technique （8SRT）, and its mechanism was analyzed. The results show that apparent diffusion coefficient of hydrogen in microalloyed spring steels Nb-V-steel and Nb-steel is lower than that in non-microalloyed steel 60Si2MnA. Percentage of strength reduction in SSRT in air after precharged hydrogen of the microalloyed steels is smaller than that of 60Si2MnA. Addition of the microalloys changes the fracture characteristics. Thence, vanadium and/or niobium additions are a very effective and economy means to improve the hydrogen-induced delayed fracture resistance of high strength spring steel.
基金Project supported by the National Natural Science Foundation of China and the State Key Laboratory of Corrosion and Protection of Metal.
文摘The change in dislocation configuration ahead of a loaded crack tip before and after charging with hydrogen was in situ investigated in TEM using a special constant deflection loading device The results showed that hydrogen could facilitate dislocation emission, multiplication and motion The change in displacement field ahead of a loaded notch tip for a bulk specimen before and after charging with hydrogen was in situ measured by the laser moire interferometer technique. The results showed that hydrogen could enlarge the plastic zone and increase the plastic strain The in situ observation in TEM showed that when hydrogen-enhanced dislocation emission and motion reached a critical condition, a nanocrack of hydrogen-induced cracking ( HIC) would nucleate in the dislocation-free zone (DFZ) or at the main crack tip. The reasons for hydrogen-enhanced dislocation emission, multiplication and motion, and the mechanisms of nucleation of HIC have been discussed
文摘Cracks and fractures occur during the assembly process to a type of torsional springs used in the aviation mechanism. Besides visual examination, other experimental techniques used for the investigation are： 1） fracture characteristics, damage morphology and fractography by scanning electron microscopy （SEM）, 2） spectrum analysis of covering, 3） metallographic observation of cracks and 4） hydrogen content testing. The results are obtained through the analysis of manufacture process and experimental data. Since no changes of microstructure are found, failures are irrelevant to the material. The cracks and fractures initiate on the inner surface, cracks initiate before the cadmium plating and after the winding. No obvious stress corrosion cracks are found near the crack source region. The opening direction of cracks is consistent with the residual tensile stress of the spring inner surface, and the springs are easy to contact hydrogen media between the spring winding and the cadmium plating. The cracks are caused by hydrogen-induced delayed cracking under the action of the residual tensile stress and hydrogen.
基金This work was financially supported by the National Key Research and Development Program of China(No.2016YFB0300604)the National Natural Science Foundation of China(Nos.51971033 and 51801011)+1 种基金the National Basic Research Program of China(No.2014CB643300)the National Materials Corrosion and Protection Data Center.
文摘We investigated the effect of nanosized NbC precipitates on hydrogen-induced cracking(HIC)of high-strength low-alloy steel by conducting slow-strain-rate tensile tests(SSRT)and performing continuous hydrogen charging and fracture analysis.The results reveal that the HIC resistance of Nb-bearing steel is obviously superior to that of Nb-free steel,with the fractured Nb-bearing steel in the SSRT exhibiting a smaller ratio of elongation reduction(Iδ).However,as the hydrogen traps induced by NbC precipitates approach hydrogen saturation,the effect of the precipitates on the HIC resistance attenuate.We speculate that the highly dispersed nanosized NbC precipitates act as irreversible hydrogen traps that hinder the accumulation of hydrogen at potential crack nucleation sites.In addition,much like Nb-free steel,the Nb-bearing steel exhibits both H-solution strengthening and the resistance to HIC.
基金This work was financially supported by the State Key Laboratory of Vehicle NVH and Safety Technology(NVHSKL-202104)the innovation research group of universities in Chongqing(CXQT21030,CXQT19031).
文摘The hydrogen embrittlement(HE)fracture of advanced high-strength steels used in lightweight automobiles has received increasing public attention.The source,transmission,and movement of hydrogen,characterization parameters,and test methods of HE,as well as the characteristics and path of HE fractures,are introduced.The mechanisms and modes of crack propagation of HE and hydrogen-induced delayed fracture are reviewed.The recent progress surrounding micro and macro typical fracture characteristics and the influencing factors of HE are discussed.Finally,methods for improving HE resistance can be summarized as follows:(1)reducing crystalline grain and inclusion sizes(oxides,sulfides,and titanium nitride),(2)controlling nano-precipitates(niobium carbide,titanium carbide,and composite precipitation),and(3)increasing residual austenite content under the reasonable tension strength of steel.
文摘The HE (hydrogen embrittlement) behavior of two kinds of austenitic stee Cr21Ni6Mn9 and 1Cr18Ni9Ti is reprted in this paper. The factors (temperc-ture/strain rate/stress concentration coefficient and purity of hydrogen) are restricted to the severe conditions under which HE is easy to occur. The concentmtion of in-ternal hydrogen in samples is changed by varying the time during which samples are placed in 24 MPa hydrogen at 473 K Then the tensile properties of the samples are tested. The results indicate that the degree of the hydrogen-induced plastic loss (L)of Cr21Ni6Mn9 is different with the internal hydrogen(CH). Howeven even when CH is as high as 70 PPm L is 15% and the fracture may be explained as a larpe amount of internal hydrogen hinders the cross-slip of dislocations when the steel is deforming.For the metastable steel 1Cr18Ni9Ti the hydrogen-induced plastic loss is severer than that of Cr21Ni6Mn9. When CH is 40 PPm its L is as high as 42%. The mechanism may be explained as a larpe amount of hyderpen decreases the stacking fault enerpy and brittle ε-phase is produed in the high CH areas.
基金the support from the Na-tional Natural Science Foundation of China(No.52101092,and 52231003)the Natural Science Foundation of Hubei Province of China(No.2021CFA023)+2 种基金the International Science and Technology Cooperation Project of Hubei Province(2021EHB006)the Young Elite Scientists Sponsorship Program by CAST(No.20210324)the Petro China Innovation Foundation(No.2020D-5007-0311)。
文摘The synergistic effects of Nb and Mo on hydrogen-induced cracking(HIC)of pipeline steels were studied experimentally and numerically.The results showed that Mo was primarily segregated at grain-boundaries(GBs)or solid-dissolved in the matrix,while most Nb and a small amount of Mo formed dis-persed(Nb,Mo)C nano-precipitates and refined the microstructure.Compared with Nb alloying,the multi-ple additions of Nb-Mo played dual roles in affecting H diffusion:primarily,the H-traps densities such as GBs,precipitates,and solute Mo atoms increased,providing an advantage;however,Mo slightly reduced the H-trapping capacity of precipitates,playing an adverse role.Nonetheless,the beneficial effects far outweighed the adverse effects,thereby reducing H diffusivity and inhibiting crack initiation.Addition-ally,Nb and Mo hindered crack propagation synergistically as follows:(i)Mo enhanced GB cohesion by repelling H,impeding intergranular cracking and hydrogen-enhanced decohesion(HEDE);(ii)Nb reduced the proportion of3/high-angle grain boundaries,increasing cracking resistance;(iii)(Nb,Mo)C precip-itates impeded H-dislocation interactions,reducing the hydrogen-enhanced localized plasticity(HELP).
基金This project was supported by a Special Fund for the Major State Basic Research Projects (No. G19990650).
文摘The role of atomic hydrogen and hydrogen-induced martensites in hydrogen embrittlement in slow strain rate tensile tests and hydrogen-induced delayed cracking (HIC) in sustained load tests for type 304 L stainless steel was quantitatively studied. The results indicated that hydrogen-induced martensites formed when hydrogen concentration C 0 exceeded 30 ppm, and increased with an increase in C 0, i.e. M(vol%)=62–82.5 exp (?C 0/102). The relative plasticity loss caused by the martensites increased linearly with increasing amount of the martensites, i.e. l δ(M), %=0.45 M (vol %)=27.9?37.1 exp(?C0/102). The plasticity loss caused by atomic hydrogen l δ(H) increased with an increase in C 0 and reached a saturation value l δ(H)max=40% when C 0>100 ppm. l δ(H) decreased with an increase in strain rate $\dot \varepsilon $ , i.e. l δ(H), $\% = - 21.9 - 9.9\dot \varepsilon $ , and was zero when $\dot \varepsilon \geqslant \dot \varepsilon _c = 0.032/s$ . HIC under sustained load was due to atomic hydrogen, and the threshold stress intensity for HIC decreased linearly with in C 0, i.e. K IH (Mpam1/2)=91.7?10.1 In C 0 (ppm). The fracture surface of HIC was dimple if K 1 was high or/and C 0 was low, otherwise it was quasi-cleavage. The boundary line between ductile and brittle fracture surface was K 1-54+25exp(?C 0/153)=0.
文摘The effect of hydrogen on the fractttre behaviors of Incoloy alloy 825 was investigated by means of slow strain rate testing （SSRT） Hydrogen was introduced into the sample by electrochemical charging. The results show that surface microcracks form gradually during ag- ing at room temperature when desorption of hydrogen takes place after hydrogen charging at a current density of 5 mA/cm^2 for 24 h. SSRT shows that the increase of ductility loss is significantly obvious as the hydrogen charging current density increases. Scanning electron microscopy （SEM） images reveal ductile fracture in the pre-charged sample with low current densities, while the fracture includes small quasi-cleavage regions and tends to be brittle fracture as the hydrogen charging current density increases to 5 mA/cm^2.
基金This work was financially supported by the National Natural Science Foundation of China(Grant No.52071010).
文摘The hydrogen-induced delayed fracture(HIDF)behavior of a 1300-MPa-grade high-strength bolt steel 42CrMoV containing 0.42 wt.%Cu was investigated by constant load tensile test in a pH 3.5 Walpole solution.It is shown that the addition of Cu is beneficial to enhance the HIDF resistance by~13%.The observation of the fracture surface revealed that the area fraction of brittle crack initiation zone decreased remarkably for the Cu-added steel.Both the corrosion pit depth and the corrosion rate of the Cu-added steel in the Walpole solution are notably decreased,which is primarily because of the formation of a Cu-rich protective compact rust layer and slightly higher corrosion potential.As a result,the absorbed hydrogen content in that solution was also decreased by~21%.It is concluded that the improvement in the HIDF resistance of the tested steel is primarily due to the increase in corrosion resistance and resultant decrease in the absorbed diffusible hydrogen content in the acidic condition.
基金supported by the National Key Technologies R&D Program of China (No.2011BAE25B03)
文摘In this study,hydrogen-induced cracking（HIC） and sulfide stress corrosion cracking（SSC） behaviors of highstrength pipeline steels in four different strength grades（X70,X80,X90 and X100） with the microstructure of acicular ferrite were estimated.The results showed that both of X70 and X80 steels exhibited better HIC resistance,and their susceptibility to HIC increased with the strength grade.HIC parameters,including cracking length ratio,cracking thickness ratio（CTR） and cracking sensitivity ratio,were all increased,and among these,the CTR increased most,with the increase in the strength grade.HIC was found to initiate and grow along the hard boundaries such as large size martensite/austenite（M/A） islands and bainitic ferrite.In addition,the density of hydrogen-induced blister on the steel surface was increased with the decrease in p H value for the same-grade pipeline steels.SSC susceptibilities of X80,X90 and X90-C were revealed to subsequently decrease,which was related to the large size M/A islands.
文摘In this paper, the microstructure and hardness of HG980D heat-affected zone （HAZ） at different cooling rate t8/3 were studied, the implant critical fracture stress under three diffusible hydrogen conditions were measured, and the hydrogeninduced cracking （H1C） fructograph of steel HG980D were analyzed, The experimental results show that martensite exists in HAZ of HG980D till ts/3 ≥ 150 s, the harden quenching tendency of HG980D is greater; The implant critical fracture stress is related to difJhsible hydrogen content significantly, at low hydrogen level, high restraint stress is needed to nucleate HIC, the fraetograph is mainly mierovoid coalescence, bat at high hydrogen level, only small restraint stress can cause H1C occurrence, the fractograph is mainly quasicleavage. It is very important to choose ultra-low hydrogen welding consumable to weld steel HG980D to prevent hydrogen-induced cracking.
文摘Effects of Mn content on the hydrogen-induced amorphization of LaNi3-xMnx(x=0.0,0.1,0.3 and 0.5) hydrogen storage alloys were studied systematically.All the alloys were prepared using a rapid quenching and annealing method.As the charging time increased,the hydrogen-induced amorphization occurred gradually in all the compounds for the first cycle.During the discharge process,discharge potential plateau was not observed in LaNi3.As Mn content increased,however,structural changes were inhibited partly,and a p...
文摘Hydrogen damage in iron or 99.99% purity has been investigated by Doppler broadening measurement.Experimental results show that when the iron is charged with hydrogen in 0.5mol/L H_2SO_4 solution,the critical current density to cause hydrogen damage is 20mA/cm^2.While a little As_2O_3,saying 250mg/L,added to H_2SO_4 solution,even rather small current density.≤0.2mA/cm^2,would cause hydrogen damage.With the help ofi slow tensile test,it revealed that the hydrogen damage occurred in the specimen may be influential to the subsequent process of deformation and fracture.
基金Item Sponsored by Special Funds for State Major Basis Research(G19990650)
文摘The threshold stress intensity of stress corrosion cracking(SCC) for 40 CrMo steel in 3.5%NaCl solution decreased exponentially with the increase of yield strength.The threshold stress intensity of hydrogen-induced cracking during dynamical charging for 40 CrMo steel decreased linearly with the logarithm of the concentration of diffusible hydrogen.This equation was also applicable to SCC of high strength steel in aqueous solution.The critical hydrogen enrichment concentration necessary for SCC of high strength steel in water decreased exponentially with the increase of yield strength.Based on the results,the relationship between K_(ISCC) and σ_(ys) could be deduced.
基金supported financially by the National Natural Science Foundation of China (No.51761032)the University Foundation of Inner Mongolia (No.NJZZ18142)
文摘The present work focuses on the structural stability upon hydrogenation of three typical La-Mg-Ni-based alloys： La2 MgNi9, LaaMgNi14 and La4MgNi19. Structural changes during gaseous and electrochemical cycles were characterized, and the influence of the structure distortion on the hydrogen storage properties was concerned. Hydrogen-induced amor- phization （HIA） and disproportionation of the three alloys have occurred during both the gaseous and electrochemical cycles. Structural stability of the phase structures in the La-Mg-Ni system is found to follow the order： LaNi5- 〉 （La,Mg）5Ni19 〉 （La,Mg）2Ni7 〉 （La,Mg）Ni3 〉 （La,Mg）Ni2. HIA increases thermal stability of the metal hydrides and difficulty to dehydrogenation and leads to degradation of both the gaseous and electrochemical capacities. Interestingly, LaEMgNi9 with poor stability presents elevated discharge capability even at 60 ℃ which can be attributed to increase in the hydrogen desorption capability and inhibition of the self-discharge induced by severe HIA at higher temperatures. In addition, HIA in the electrochemical reactions is obviously weaker than the extent during the gaseous cycles, which is mainly due to the slower hydrogenation speed. The development of HIA in the gaseous and electrochemical process is considered to follow the direct and gradual modes, respectively.
文摘The precipitation process of zirconium hydrides induced by stress and strain was investigated by means of electron microscopy in-situ.The precipitating hydrides induced by stress were found to be γ phase with orientation relationship of (110)_γ‖(110)_(αZr),(001)_γ‖ (0001)_(αZr) between γ-hydrides and surrounding matrix.The growth rate of γ-hydrides which was much faster along [110] direction brought them in taper shape.After fracture of y-hydrides,a new one will precipitate at the tip of cracks.This is the essential process of hydrogen-induced delayed cracking in Zircaloy.The precipitating hydrides induced by strain were found to be δ phase with both orientation relationships of(111)_δ‖(0001)_(αZr),(110)_δ‖ (110)_(αZr) or (010)_δ‖(0001)_(αZr),(001)_δ‖(110)_(αZr)between δ-hydride and surrounding matrix.The δ-hydrides become much finer as the strain rate increased.
文摘Hydrogen-induced cracking was investigated by TEM in-situ tension in hydrogenated stainless steel of type 310. It was found experimentally that hydrogen-induced cracking happens via nanovoid nucleation followed by quasi-cleavage along {111} planes when C H is higher. Otherwise, in the case of lower C H, hydrogen enhances ductile fracture via hydrogen-enhanced microvoid nucleation, growth and connection. A new model was proposed based on the present experiments. Dislocations break away from defect atmospheres and move away from the DFZ, leaving vacancy and hydrogen clusters along {111} planes. Hydrogen tends to combine with vacancy clusters and initiate nanovoids along {111} planes. Dense nanovoids connect each other, resulting in brittle cracking. Scattered nanovoids grow into microvoids or even macrovoids, leading to ductile fracture.
基金Project supported by the National Natural Science Foundation of China.
文摘By combining the hydrogen-induced local plastic deformation theory with the decohesive theory and the hydrogen pressure theory, a new mechanism of hydrogen-facilitating initiation of voids has been proposed. Through facilitating the local plastic deformation and reducing the cohesive strength, hydrogen promotes both initiating a nanocrack and blunting the nanocrack into a void, resulting in hydrogen-promoting initiation of the void. On the other hand, hydrogen can enhance the stability of the void through reducing the cohesive strength and forming a hydrogen pressure in the void.
基金This work was supported by the Special Funds for the Major State Basic Research (G 19990650) and the National Natural Science Foundation of China (Grant No. 50131160738).
文摘Threshold stress intensity factor of hydrogen-induced cracking (HIC), K IH, of a lead zirconate titanate ferroelectric ceramics (PZT-5) has been measured during dynamic charging with various current densities at constant load using notched tensile specimens with poling direction parallel or perpendicular to the crack plane. The results show that K IH reveals anisotropy, and the threshold stress intensity factor for the specimen with poling direction parallel to the crack plane, K IH a , is greater than that perpendicular to the crack plane, K IH b , similar to the anisotropy of fracture toughness, K IC. The normalized threshold stress intensity factor of HIC, however, does not reveal anisotropy, and decreass linearly with logarithm of hydrogen concentration, C o, i.e. K IH a /K IC a =K IH b /K IC b =0.4?0.15 In C o. Therefore, the anisotropy of HIC is the same as that of the fracture toughness, and is due to the anisotropy of the stress-induced 90° domain switching.
