The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual ...The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual productivity. This paper studies the dynamic fluid flow through hydraulic fractures and its effect on borehole acoustic waves. Firstly, based on the fractal characteristics of fractures observed in hydraulic fracturing experiments, a permeability model of complex fracture network is established. Combining the dynamic fluid flow response of the model with the Biot-Rosenbaum theory that describes the acoustic wave propagation in permeable formations, the influence of hydraulic fractures on the velocity dispersion of borehole Stoneley-wave is then calculated and analyzed, whereby a novel hydraulic fracture fluid transport property evaluation method is proposed. The results show that the Stoneley-wave velocity dispersion characteristics caused by complex fractures can be equivalent to those of the plane fracture model, provided that the average permeability of the complex fracture model is equal to the permeability of the plane fracture. In addition, for fractures under high-permeability(fracture width 10~100 μm, permeability ~100 μm^(2)) and reduced permeability(1~10 μm, ~10 μm^(2), as in fracture closure) conditions, the Stoneley-wave velocity dispersion characteristics are significantly different. The field application shows that this fluid transport property evaluation method is practical to assess the permeability and the connectivity of hydraulic fractures.展开更多
Hydraulic fracturing combined with horizontal drilling has been the technology that makes it possible to economically produce natural gas from unconventional shale gas or tight gas reservoirs.Hydraulic fracturing oper...Hydraulic fracturing combined with horizontal drilling has been the technology that makes it possible to economically produce natural gas from unconventional shale gas or tight gas reservoirs.Hydraulic fracturing operations,in particular,multistage fracturing treatments along with horizontal wells in unconventional formations create complex fracture geometries or networks,which are difficult to characterize.The traditional analysis using a single vertical or horizontal fracture concept may be no longer applicable.Knowledge of these created fracture properties,such as their spatial distribution,extension and fracture areas,is essential information to evaluate stimulation results.However,there are currently few effective approaches available for quantifying hydraulic fractures in unconventional reservoirs.This work presents an unconventional gas reservoir simulator and its application to quantify hydraulic fractures in shale gas reservoirs using transient pressure data.The numerical model incorporates most known physical processes for gas production from unconventional reservoirs,including two-phase flow of liquid and gas,Klinkenberg effect,non-Darcy flow,and nonlinear adsorption.In addition,the model is able to handle various types and scales of fractures or heterogeneity using continuum,discrete or hybrid modeling approaches under different well production conditions of varying rate or pressure.Our modeling studies indicate that the most sensitive parameter of hydraulic fractures to early transient gas flow through extremely low permeability rock is actually the fracture-matrix contacting area,generated by fracturing stimulation.Based on this observation,it is possible to use transient pressure testing data to estimate the area of fractures generated from fracturing operations.We will conduct a series of modeling studies and present a methodology using typical transient pressure responses,simulated by the numerical model,to estimate fracture areas created or to quantity hydraulic fractures with traditional well t展开更多
Field development typically requires detailed petrophysical analysis and well defined hydraulic flow units for comprehensive formation evaluation and reservoir characterization. In the present study, pay zones petroph...Field development typically requires detailed petrophysical analysis and well defined hydraulic flow units for comprehensive formation evaluation and reservoir characterization. In the present study, pay zones petrophysics are studied using an assembly of well log data from 8 wells together with core plugs measurements. Petrophysical analysis showed a good reservoir quality with average water saturation increasing toward the East and Southeast of the study area. Using a multi-linear regression technique on well logs and core data, permeability is estimated at well locations for flow unit characterization and flow capacity calculation. Results showed that five hydraulic flow units are identified through the studied wells, with relatively good correlation. Such correlation indicated a good continuity in the net pay zone of Abu Madi Formation in the Nile Delta reservoirs. The developed hydraulic flow units (HFUs) are classified according to its hydraulic conductivity into two main categories: the first category comprises the units with low permeability (K 1270 mD). The reservoir flow capacity (RFC) of these units indicated the development of 4 distinct classes (~11, ~30, ~80, and greater than 130 D.ft). The wells within the Northwestern part of the study area showed three HFUs that relatively vary from those located at the Southeast where two HFUs are only developed. In addition, the Southeastern part of the reservoir is characterized by good RFC as indicated by the development of high order HFUs (3, 4, and 5) compared to the Northeastern part with predominated low order HFUs (1, 2, and 3). Such results are crucial for the efficient field development and profound reservoir management of oil and gas fields in the Nile Delta.展开更多
基金Foundation Item：Strategic Environmental Research and Development Program （SERDP）AcknowLedgements Supports from the Strategic Environmental Research and Development Program （SERDP） subcontracted through the University of Iowa as well niversity of Waterloo are also thank two anonymous constructive and insightful as that throug acknowledged. reviewers for suggestions.
基金Supported by the National Natural Science Foundation of China (41821002,42174145)PetroChina Science and Technology Major Project (ZD2019-183-004)China University of Petroleum (East China) Graduate Student Innovation Project (YCX2019001)。
文摘The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual productivity. This paper studies the dynamic fluid flow through hydraulic fractures and its effect on borehole acoustic waves. Firstly, based on the fractal characteristics of fractures observed in hydraulic fracturing experiments, a permeability model of complex fracture network is established. Combining the dynamic fluid flow response of the model with the Biot-Rosenbaum theory that describes the acoustic wave propagation in permeable formations, the influence of hydraulic fractures on the velocity dispersion of borehole Stoneley-wave is then calculated and analyzed, whereby a novel hydraulic fracture fluid transport property evaluation method is proposed. The results show that the Stoneley-wave velocity dispersion characteristics caused by complex fractures can be equivalent to those of the plane fracture model, provided that the average permeability of the complex fracture model is equal to the permeability of the plane fracture. In addition, for fractures under high-permeability(fracture width 10~100 μm, permeability ~100 μm^(2)) and reduced permeability(1~10 μm, ~10 μm^(2), as in fracture closure) conditions, the Stoneley-wave velocity dispersion characteristics are significantly different. The field application shows that this fluid transport property evaluation method is practical to assess the permeability and the connectivity of hydraulic fractures.
文摘Hydraulic fracturing combined with horizontal drilling has been the technology that makes it possible to economically produce natural gas from unconventional shale gas or tight gas reservoirs.Hydraulic fracturing operations,in particular,multistage fracturing treatments along with horizontal wells in unconventional formations create complex fracture geometries or networks,which are difficult to characterize.The traditional analysis using a single vertical or horizontal fracture concept may be no longer applicable.Knowledge of these created fracture properties,such as their spatial distribution,extension and fracture areas,is essential information to evaluate stimulation results.However,there are currently few effective approaches available for quantifying hydraulic fractures in unconventional reservoirs.This work presents an unconventional gas reservoir simulator and its application to quantify hydraulic fractures in shale gas reservoirs using transient pressure data.The numerical model incorporates most known physical processes for gas production from unconventional reservoirs,including two-phase flow of liquid and gas,Klinkenberg effect,non-Darcy flow,and nonlinear adsorption.In addition,the model is able to handle various types and scales of fractures or heterogeneity using continuum,discrete or hybrid modeling approaches under different well production conditions of varying rate or pressure.Our modeling studies indicate that the most sensitive parameter of hydraulic fractures to early transient gas flow through extremely low permeability rock is actually the fracture-matrix contacting area,generated by fracturing stimulation.Based on this observation,it is possible to use transient pressure testing data to estimate the area of fractures generated from fracturing operations.We will conduct a series of modeling studies and present a methodology using typical transient pressure responses,simulated by the numerical model,to estimate fracture areas created or to quantity hydraulic fractures with traditional well t
文摘Field development typically requires detailed petrophysical analysis and well defined hydraulic flow units for comprehensive formation evaluation and reservoir characterization. In the present study, pay zones petrophysics are studied using an assembly of well log data from 8 wells together with core plugs measurements. Petrophysical analysis showed a good reservoir quality with average water saturation increasing toward the East and Southeast of the study area. Using a multi-linear regression technique on well logs and core data, permeability is estimated at well locations for flow unit characterization and flow capacity calculation. Results showed that five hydraulic flow units are identified through the studied wells, with relatively good correlation. Such correlation indicated a good continuity in the net pay zone of Abu Madi Formation in the Nile Delta reservoirs. The developed hydraulic flow units (HFUs) are classified according to its hydraulic conductivity into two main categories: the first category comprises the units with low permeability (K 1270 mD). The reservoir flow capacity (RFC) of these units indicated the development of 4 distinct classes (~11, ~30, ~80, and greater than 130 D.ft). The wells within the Northwestern part of the study area showed three HFUs that relatively vary from those located at the Southeast where two HFUs are only developed. In addition, the Southeastern part of the reservoir is characterized by good RFC as indicated by the development of high order HFUs (3, 4, and 5) compared to the Northeastern part with predominated low order HFUs (1, 2, and 3). Such results are crucial for the efficient field development and profound reservoir management of oil and gas fields in the Nile Delta.
