In order to analyze the effects of forward-swept angle and skin ply-orientation on the static and dynamic aeroelastic characteristics, the aeroelastic modeling and calculation for high-aspect-ratio composite wings wit...In order to analyze the effects of forward-swept angle and skin ply-orientation on the static and dynamic aeroelastic characteristics, the aeroelastic modeling and calculation for high-aspect-ratio composite wings with different forward-swept angles and skin ply-orientation are performed. This paper presents the results of a design study aiming to optimize wings with typical forward-swept angles and skin ply-orientation in an aeroelastic way by using the genetic/sensitivity-based hybrid algorithm. Under the conditions of satiated multiple constraints including strength, displacements, divergence speeds and flutter speeds, the studies are carried out in a bid to minimize the structural weight of a wing with the lay-up thicknesses of wing components as design variabies. In addition, the effects of the power of spanwise variation function of lay-up thicknesses of skins and iugs on the optimized weights are also analyzed.展开更多
Aeroelastic problems are encountered at the preliminary design stage of flexible wings for large aircraft. A three-dimensional finite element model of a high-aspect-ratio wing was built, and the influence of the front...Aeroelastic problems are encountered at the preliminary design stage of flexible wings for large aircraft. A three-dimensional finite element model of a high-aspect-ratio wing was built, and the influence of the front and rear spar positions on the results of the aeroelastic analysis and optimization was studied to improve the wing structure desgin. The most feasible and optimal solutions were effectively obtained by aeroelastic optimization. In particular, the position parameter of the front spar has a greater influence on the aeroelastic analysis and optimization than the rear spar. In addition, some key constraints became re- strictive leading to a rapid increase in the structural weight. Therefore, reasonable constraints were necessary for the optimization of results.展开更多
The stall flutter characters of high-aspect-ratio composite wing are investigated, and the effects of structure geometric nonlinearity and stiffness couple created by composite anisotropy on them also are discussed. F...The stall flutter characters of high-aspect-ratio composite wing are investigated, and the effects of structure geometric nonlinearity and stiffness couple created by composite anisotropy on them also are discussed. Firstly, the high-aspect-ratio wing is modeled as a composite thin-walled closed section Euler beam whose displacement and rotation both could be of finite value, and the nonlinear dynamic equations is build up on it with all the effects of geometric nonlinearity, aerodynamic nonlinearity and anisotropy of material being considered. Then vibration equations are deduced through perturbing the dynamic equations at wing＇s equilibrium position, and coupled with unsteady stall aerodynamic model and ONERA model, to obtain the nonlinear stall flutter analysis equations of wing. Finally, the flutter stabilities with various wind speeds are determined by the harmonic balance method. With several exampies, the validity of the stall flutter model is proved, and the significant effects of geometric nonlinearity on the stall flutter various characters as wall as the effects of ply angle on the stall flutter speed and frequency also are discussed.展开更多
In order to get an effective solution of the in-flight wing deformation measurement for high-wing aircrafts with high-aspect-ratio,a method based on three-dimensional(3D)speckle correlation technique is proposed.First...In order to get an effective solution of the in-flight wing deformation measurement for high-wing aircrafts with high-aspect-ratio,a method based on three-dimensional(3D)speckle correlation technique is proposed.Firstly,an in-flight wing deformation measurement system with two sets of conjugate cameras is designed based on structural characteristics and test requirements of high-wing aircrafts with large-aspect-ratio.Secondly,the in-flight wing deformation measurement method based on 3D speckle correlation technique is introduced including three aspects:measuring system and wing datum calibration,speckle image matching and 3D reconstruction,and wing deformation analysis.Fi-nally,ground simulation test of dynamic deformation measurement of a scaled model wing and flight test of dynamic deformation measurement of a large transport wing are carried out.The test results show that the measuring accuracy of single point coordinate in ground simulation test is better than 0.1 mm/m,in the airborne vibration environment,the static single-point positioning accuracy is bet-ter than 5 mm,and the in-flight wing deformation measurement data is well received by the flight test engineers.This method can satisfy the requirements of stability,reliability,high precision,non-con-tact and full-field measurement for dynamic deformation measurement of aircraft wing with high-as-pect-ratio.展开更多
The aeroelastic responses of a high-aspect-ratio wing are investigated based on nonlinear experimental aerodynamic forces. The influences of nonlinear experimental aerodynamic forces and dynamic pressures on the wing ...The aeroelastic responses of a high-aspect-ratio wing are investigated based on nonlinear experimental aerodynamic forces. The influences of nonlinear experimental aerodynamic forces and dynamic pressures on the wing loads are studied in the longitudinal and lateral maneuver states. The flight loads of the wing fixed at the root are calculated at different angles of attack. The aileron efficiency with respect to the dynamic pressures and aileron deflections are also studied. The results indicate that the flight loads of the wings vary nonlinearly with the angle of attack and dynamic pressure. Due to the high-lift aerofoil, elastic components are a large portion of the wing loads, especially for small angles of attack and high dynamic pressure condi-tions. The aileron efficiency is significantly affected by aileron deflections, dynamic pressures and angles of attack when the nonlinear experimental aerodynamic forces are used for calculation. In states with high dynamic pressures and large aileron deflections, aileron reversal can occur. The aileron deflection and angle of attack have a nonlinear effect on the aileron efficiency. An efficient method for analyzing the flight loads and structural design of high-aspect-ratio wings is derived in this study, and the analysis can provide insight into the distribution of flight loads for high-aspect-ratio wings.展开更多
文摘In order to analyze the effects of forward-swept angle and skin ply-orientation on the static and dynamic aeroelastic characteristics, the aeroelastic modeling and calculation for high-aspect-ratio composite wings with different forward-swept angles and skin ply-orientation are performed. This paper presents the results of a design study aiming to optimize wings with typical forward-swept angles and skin ply-orientation in an aeroelastic way by using the genetic/sensitivity-based hybrid algorithm. Under the conditions of satiated multiple constraints including strength, displacements, divergence speeds and flutter speeds, the studies are carried out in a bid to minimize the structural weight of a wing with the lay-up thicknesses of wing components as design variabies. In addition, the effects of the power of spanwise variation function of lay-up thicknesses of skins and iugs on the optimized weights are also analyzed.
基金supported by the National Natural Science Foundation of China (Grant No.10902006)the Doctoral Program Foundation of Institutions of Higher Education of China (Grant No.20091102110015)
文摘Aeroelastic problems are encountered at the preliminary design stage of flexible wings for large aircraft. A three-dimensional finite element model of a high-aspect-ratio wing was built, and the influence of the front and rear spar positions on the results of the aeroelastic analysis and optimization was studied to improve the wing structure desgin. The most feasible and optimal solutions were effectively obtained by aeroelastic optimization. In particular, the position parameter of the front spar has a greater influence on the aeroelastic analysis and optimization than the rear spar. In addition, some key constraints became re- strictive leading to a rapid increase in the structural weight. Therefore, reasonable constraints were necessary for the optimization of results.
文摘The stall flutter characters of high-aspect-ratio composite wing are investigated, and the effects of structure geometric nonlinearity and stiffness couple created by composite anisotropy on them also are discussed. Firstly, the high-aspect-ratio wing is modeled as a composite thin-walled closed section Euler beam whose displacement and rotation both could be of finite value, and the nonlinear dynamic equations is build up on it with all the effects of geometric nonlinearity, aerodynamic nonlinearity and anisotropy of material being considered. Then vibration equations are deduced through perturbing the dynamic equations at wing＇s equilibrium position, and coupled with unsteady stall aerodynamic model and ONERA model, to obtain the nonlinear stall flutter analysis equations of wing. Finally, the flutter stabilities with various wind speeds are determined by the harmonic balance method. With several exampies, the validity of the stall flutter model is proved, and the significant effects of geometric nonlinearity on the stall flutter various characters as wall as the effects of ply angle on the stall flutter speed and frequency also are discussed.
基金Supported by the National Natural Science Foundation of China(No.62271400).
文摘In order to get an effective solution of the in-flight wing deformation measurement for high-wing aircrafts with high-aspect-ratio,a method based on three-dimensional(3D)speckle correlation technique is proposed.Firstly,an in-flight wing deformation measurement system with two sets of conjugate cameras is designed based on structural characteristics and test requirements of high-wing aircrafts with large-aspect-ratio.Secondly,the in-flight wing deformation measurement method based on 3D speckle correlation technique is introduced including three aspects:measuring system and wing datum calibration,speckle image matching and 3D reconstruction,and wing deformation analysis.Fi-nally,ground simulation test of dynamic deformation measurement of a scaled model wing and flight test of dynamic deformation measurement of a large transport wing are carried out.The test results show that the measuring accuracy of single point coordinate in ground simulation test is better than 0.1 mm/m,in the airborne vibration environment,the static single-point positioning accuracy is bet-ter than 5 mm,and the in-flight wing deformation measurement data is well received by the flight test engineers.This method can satisfy the requirements of stability,reliability,high precision,non-con-tact and full-field measurement for dynamic deformation measurement of aircraft wing with high-as-pect-ratio.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60736025, 90716006, 10902006)the Doctoral Pro-gram Foundation of Institutions of Higher Education of China (Grant No. 20091102110015)the Major Programs of China National Space Administration (Grant No. D2120060013)
文摘The aeroelastic responses of a high-aspect-ratio wing are investigated based on nonlinear experimental aerodynamic forces. The influences of nonlinear experimental aerodynamic forces and dynamic pressures on the wing loads are studied in the longitudinal and lateral maneuver states. The flight loads of the wing fixed at the root are calculated at different angles of attack. The aileron efficiency with respect to the dynamic pressures and aileron deflections are also studied. The results indicate that the flight loads of the wings vary nonlinearly with the angle of attack and dynamic pressure. Due to the high-lift aerofoil, elastic components are a large portion of the wing loads, especially for small angles of attack and high dynamic pressure condi-tions. The aileron efficiency is significantly affected by aileron deflections, dynamic pressures and angles of attack when the nonlinear experimental aerodynamic forces are used for calculation. In states with high dynamic pressures and large aileron deflections, aileron reversal can occur. The aileron deflection and angle of attack have a nonlinear effect on the aileron efficiency. An efficient method for analyzing the flight loads and structural design of high-aspect-ratio wings is derived in this study, and the analysis can provide insight into the distribution of flight loads for high-aspect-ratio wings.
