In recent years,a new class of metallic materials featuring heterogeneous structures has emerged.These materials consist of distinct soft and hard domains with significant differences in mechanical properties,allowing...In recent years,a new class of metallic materials featuring heterogeneous structures has emerged.These materials consist of distinct soft and hard domains with significant differences in mechanical properties,allowing them to maintain high strength while offering superior ductility.Magnesium(Mg)alloys,renowned for their low density,high specific strength,exceptional vibration damping,and electromagnetic shielding properties,exhibit tremendous potential as lightweight and functional materials.Despite their advantageous properties,high-strength Mg alloys often suffer from limited ductility.However,the emergence of heterogeneous materials provides a fresh perspective for the development of Mg alloys with both high strength and ductility.This article provided a fundamental overview of heterostructured materials and systematically reviewed the recent research progress in the design of Mg alloys with strength-ductility balance based on heterostructure principles.The review encompassed various aspects,including preparation methods,formation mechanisms of diverse heterostructures,and mechanical properties,both within domestic and international contexts.On this basis,the article discussed the challenges encountered in the design and fabrication of heterostructured Mg alloys,as well as the urgent issues that require attention and resolution in the future.展开更多
Heterostructured eutectic high-entropy alloys(EHEAs)have attracted significant attention owing to their novel properties,such as balanced combinations of strength and fracture toughness.However,the toughening/strength...Heterostructured eutectic high-entropy alloys(EHEAs)have attracted significant attention owing to their novel properties,such as balanced combinations of strength and fracture toughness.However,the toughening/strengthening mechanisms of these EHEAs have not been thoroughly investigated.In this study,we developed a series of dual-phase Al_((18–2x))Co_(30)Cr_((11+x))Fe_((11+x))Ni_(3)0(x=-1,0,1)eutectic and neareutectic HEAs containing face-centered cubic(FCC)and body-centered cubic(BCC)phases.Despite the high amount of BCC,which is referred to as the brittle phase,newly developed EHEAs exhibited superior fracture toughness.Interestingly,we discovered that a fully eutectic HEA exhibited further improvements in both yield stress and fracture toughness,outperforming our off-eutectic and other previously reported HEAs.By combining experiments and theoretical models,we demonstrated that the synergistic increase in both strength and toughness in our fully eutectic HEA was derived from the high hetero-deformationinduced(HDI)strengthening/toughening associated with a high misorientation angle at the grain/phase boundaries.展开更多
The cold rolling deformation textural evolution of an interstitial-free （IF） steel sheet is investigated by experiment and simulation. The microstructure of the IF steel is observed by transmission electron microsco...The cold rolling deformation textural evolution of an interstitial-free （IF） steel sheet is investigated by experiment and simulation. The microstructure of the IF steel is observed by transmission electron microscopy （TEM）. The relationship between the deformation behavior of individual grain and the grain orientation are connected by Taylor factor M. The results show that the grains with higher Taylor factor are deformed slighter than those with lower ones. By considering the heterogeneous deformation, the texture simulation result can be greatly improved.展开更多
Improving the plasticity of TiAl alloys at room temperature has been a longstanding challenge for the de-velopment of next-generation aerospace engines.By adopting the nacre-like architecture design strategy,we have o...Improving the plasticity of TiAl alloys at room temperature has been a longstanding challenge for the de-velopment of next-generation aerospace engines.By adopting the nacre-like architecture design strategy,we have obtained a novel heterogeneous lamellar Ti_(2)AlC/TiAl composite with superior strength-plasticity synergy,i.e.,compressive strength of∼2065 MPa and fracture strain of∼27%.A combination of micropil-lar compression and large-scale atomistic simulation has revealed that the superior strength-plasticity synergy is attributed to the collaboration of Ti_(2)AlC reinforcement,lamellar architecture and heteroge-neous interface.More specifically,multiple deformation modes in Ti_(2)AlC,i.e.,basal-plane dislocations,atomic-scale ripples and kink bands,could be activated during the compression,thus promoting the plas-tic deformation capability of composite.Meanwhile,the lamellar architecture could not only induce sig-nificant stress redistribution and crack deflection between Ti_(2)AlC and TiAl,but also generate high-density SFs and DTs interactions in TiAl,leading to an improved strength and strain hardening ability.In addi-tion,profuse unique Ti_(2)AlC(1¯10¯3)/TiAl(111)interfaces in the composite could dramatically contribute to the strength and plasticity due to the interface-mediated dislocation nucleation and obstruction mecha-nisms.These findings offer a promising paradigm for tailoring microstructure of TiAl matrix composites with extraordinary strength and plasticity at ambient temperature.展开更多
The heterogeneous deformation behavior of austenite and ferrite in the 2205 duplex stainless steel was subjected to multiscale analysis based on the in situ synchrotron-based high energy X-ray diffraction,microscopic ...The heterogeneous deformation behavior of austenite and ferrite in the 2205 duplex stainless steel was subjected to multiscale analysis based on the in situ synchrotron-based high energy X-ray diffraction,microscopic digital image correlation,electron backscatter diffraction,and transmission electron microscopy.It is found that the heterogeneous deformation triggers from the yielding of austenite.During this deformation stage,austenite experiences greater strain in the area near the phase boundaries because of the impeded function of the phase boundaries to dislocations.Owing to the relatively small difference in hardness between the constituent phases,the strain in austenite grains extends into the adjacent ferrite grains when entering into the ferrite yielding stage.In addition,the strain distribution of the austenite grains is more homogeneous than that of the ferrite grains because of the lower stacking fault energy of austenite,which results in a planar slip,and higher stacking fault energy in case of ferrite,causing cross slip.The interaction between austenite and ferrite becomes considerably obvious when the strain further increases after both constituent phases yielding because of the back stress and forward stress in austenite and ferrite,respectively,which are generated by the pile-up of the geometrically necessary dislocations.展开更多
Laser powder bed fusion(L-PBF)of Sc/Zr-modified Al-based alloys has recently become a promising method for developing a new generation of high-performance Al alloys.To clarify the modification roles of Sc/Zr elements,...Laser powder bed fusion(L-PBF)of Sc/Zr-modified Al-based alloys has recently become a promising method for developing a new generation of high-performance Al alloys.To clarify the modification roles of Sc/Zr elements,an Al–4.66Mg–0.48Mn–0.72Sc–0.33Zr(wt.%)alloy was processed using L-PBF.The effect of the local solidification condition of the molten pool on the precipitation behavior of primary Al_(3)(Sc,Zr)was analyzed based on time-dependent nucleation theory.It was found that primary Al_(3)(Sc,Zr)inevitably precipitated at the fusion boundary,while its precipitation could be effectively suppressed in the inner region of the molten pool.This subsequently induced the formation of a heterogeneousα-Al matrix.After direct aging,the heredity of solidification microstructure introduced heterogeneous secondary Al_(3)(Sc,Zr)precipitates withinα-Al matrix.Owing to the inverse relationship between grain boundary strengthening and precipitation strengthening,the direct-aged sample with dual heterogeneous structures exhibited reduced mechanical heterogeneity,resulting in lowered hetero-deformation-induced hardening.The low strain-hardening capability in the direct-aged sample promoted necking instability while inducing a large Lüders elongation,which effectively improved the tensile ductility.展开更多
In this study,the deformable titanium(Ti)particles reinforced AZ91 composite was successfully prepared by powder metallurgy and subsequent extrusion.The mechanical properties and microstructural evolution of pure AZ91...In this study,the deformable titanium(Ti)particles reinforced AZ91 composite was successfully prepared by powder metallurgy and subsequent extrusion.The mechanical properties and microstructural evolution of pure AZ91 and 5 Ti/AZ91 composite were studied.The yield strength,ultimate tensile strength,and elongation of 5 Ti/AZ91 composite are measured to be 212 MPa,323 MPa,and 10.1%,respectively.Microstructure analysis revealed that Ti particles are elongated along the extrusion direction,forming a discontinuous strip Ti particles,fine precipitated Mg_(17)Al_(12) phase inhibits dynamic recrystallization(DRX)behavior through Zener pinning effect and hinders the growth of matrix grains,resulting in refiner grains of 5 Ti/AZ91 composite.Heterogeneous deformed Ti particles and magnesium(Mg)matrix to generate additional heterogeneous deformation-induced(HDI)strengthening.Heterogeneous deformation-induced strengthening mainly contributed to the increment of yield strength for 5 Ti/AZ91 composite.展开更多
Slip transfer is influential in determining damage nucleation of polycrystalline material.The interactions between dislocations and grain boundaries(GBs)was investigated using in-situ tension test in a multi-direction...Slip transfer is influential in determining damage nucleation of polycrystalline material.The interactions between dislocations and grain boundaries(GBs)was investigated using in-situ tension test in a multi-directionally forged Mg-5.4Gd-1.8Y-1.5Zn(wt%)alloy.It was found that strain accommodation of individual grains by means of slip occurred more easily than slip transfer when several slip systems were operable.The basal-basal slip transfer occurred when the GB misorientation was smaller than 34.2°,whereas basal-pyramidal type took place when the crystallographic misorientation was larger than 48.8°.The product of Luster-Morris m factor and the sum of the Schmid factors of the two correlated slip systems indicated that the threshold for basal-basal slip transfer may exist,however,basal-pyramidal slip transfer shows no such threshold and is more complicated.These results presented here demonstrated that besides the geometrical alignment,the deformation details(such as the number of operable slip systems)and stress state in each individual grain must be considered.展开更多
基金supported by Yunnan Fundamental Research Projects(No.202201BE070001-014)Doctoral Scientific Research Foundation of Hubei University of Automotive Technology(No.BK202336)+4 种基金National Natural Science Foundation of China(No.52071035)Program for Science and Technology Innovation Team in Colleges of Hubei Province(No.T2021012)Outstanding Young Scientific&Technological Innovation Team Plan of Colleges and Universities in Hubei Province(No.T201518 and No.T201811)Major Science and Technology Project of Hubei Province(No.2022AAA001)Key R&D Project of Hubei Province(No.2021BAB019)。
文摘In recent years,a new class of metallic materials featuring heterogeneous structures has emerged.These materials consist of distinct soft and hard domains with significant differences in mechanical properties,allowing them to maintain high strength while offering superior ductility.Magnesium(Mg)alloys,renowned for their low density,high specific strength,exceptional vibration damping,and electromagnetic shielding properties,exhibit tremendous potential as lightweight and functional materials.Despite their advantageous properties,high-strength Mg alloys often suffer from limited ductility.However,the emergence of heterogeneous materials provides a fresh perspective for the development of Mg alloys with both high strength and ductility.This article provided a fundamental overview of heterostructured materials and systematically reviewed the recent research progress in the design of Mg alloys with strength-ductility balance based on heterostructure principles.The review encompassed various aspects,including preparation methods,formation mechanisms of diverse heterostructures,and mechanical properties,both within domestic and international contexts.On this basis,the article discussed the challenges encountered in the design and fabrication of heterostructured Mg alloys,as well as the urgent issues that require attention and resolution in the future.
基金supported by the National Research Foundation of Korea(No.NRF-2021R1A6A3A0108674211)the Fundamental Research Program of the Korean Institute of Materials Science(No.PNK8730)by Research Grant Council(RGC),Hong Kong Government,through General Research Fund(Nos.CityU11213118,CityU11200719 and CityU11209317).
文摘Heterostructured eutectic high-entropy alloys(EHEAs)have attracted significant attention owing to their novel properties,such as balanced combinations of strength and fracture toughness.However,the toughening/strengthening mechanisms of these EHEAs have not been thoroughly investigated.In this study,we developed a series of dual-phase Al_((18–2x))Co_(30)Cr_((11+x))Fe_((11+x))Ni_(3)0(x=-1,0,1)eutectic and neareutectic HEAs containing face-centered cubic(FCC)and body-centered cubic(BCC)phases.Despite the high amount of BCC,which is referred to as the brittle phase,newly developed EHEAs exhibited superior fracture toughness.Interestingly,we discovered that a fully eutectic HEA exhibited further improvements in both yield stress and fracture toughness,outperforming our off-eutectic and other previously reported HEAs.By combining experiments and theoretical models,we demonstrated that the synergistic increase in both strength and toughness in our fully eutectic HEA was derived from the high hetero-deformationinduced(HDI)strengthening/toughening associated with a high misorientation angle at the grain/phase boundaries.
基金the National Natural Science Foundation of China （Grant No. 50671021） Program for New Century Excellent Talents in University （Grant No. NCET-06-0287）.
文摘The cold rolling deformation textural evolution of an interstitial-free （IF） steel sheet is investigated by experiment and simulation. The microstructure of the IF steel is observed by transmission electron microscopy （TEM）. The relationship between the deformation behavior of individual grain and the grain orientation are connected by Taylor factor M. The results show that the grains with higher Taylor factor are deformed slighter than those with lower ones. By considering the heterogeneous deformation, the texture simulation result can be greatly improved.
基金the National Natural Science Foundation of China(Grant No.52101174)the State Key Lab of Advanced Metals and Materials(No.2022-Z15).
文摘Improving the plasticity of TiAl alloys at room temperature has been a longstanding challenge for the de-velopment of next-generation aerospace engines.By adopting the nacre-like architecture design strategy,we have obtained a novel heterogeneous lamellar Ti_(2)AlC/TiAl composite with superior strength-plasticity synergy,i.e.,compressive strength of∼2065 MPa and fracture strain of∼27%.A combination of micropil-lar compression and large-scale atomistic simulation has revealed that the superior strength-plasticity synergy is attributed to the collaboration of Ti_(2)AlC reinforcement,lamellar architecture and heteroge-neous interface.More specifically,multiple deformation modes in Ti_(2)AlC,i.e.,basal-plane dislocations,atomic-scale ripples and kink bands,could be activated during the compression,thus promoting the plas-tic deformation capability of composite.Meanwhile,the lamellar architecture could not only induce sig-nificant stress redistribution and crack deflection between Ti_(2)AlC and TiAl,but also generate high-density SFs and DTs interactions in TiAl,leading to an improved strength and strain hardening ability.In addi-tion,profuse unique Ti_(2)AlC(1¯10¯3)/TiAl(111)interfaces in the composite could dramatically contribute to the strength and plasticity due to the interface-mediated dislocation nucleation and obstruction mecha-nisms.These findings offer a promising paradigm for tailoring microstructure of TiAl matrix composites with extraordinary strength and plasticity at ambient temperature.
基金financial support provided by Youth Innovation Promotion Association,CAS(No.Y201732)LiaoNing Revitalization Talents Program(No.XLYC1807022)the Project to Strengthen Industrial Development at the Grass-roots level。
文摘The heterogeneous deformation behavior of austenite and ferrite in the 2205 duplex stainless steel was subjected to multiscale analysis based on the in situ synchrotron-based high energy X-ray diffraction,microscopic digital image correlation,electron backscatter diffraction,and transmission electron microscopy.It is found that the heterogeneous deformation triggers from the yielding of austenite.During this deformation stage,austenite experiences greater strain in the area near the phase boundaries because of the impeded function of the phase boundaries to dislocations.Owing to the relatively small difference in hardness between the constituent phases,the strain in austenite grains extends into the adjacent ferrite grains when entering into the ferrite yielding stage.In addition,the strain distribution of the austenite grains is more homogeneous than that of the ferrite grains because of the lower stacking fault energy of austenite,which results in a planar slip,and higher stacking fault energy in case of ferrite,causing cross slip.The interaction between austenite and ferrite becomes considerably obvious when the strain further increases after both constituent phases yielding because of the back stress and forward stress in austenite and ferrite,respectively,which are generated by the pile-up of the geometrically necessary dislocations.
基金financially supported by the National Key Research and Development Program of China(Nos.2018YFB1106302 and 2016YFB1100104)the National Natural Science Foundation of China(No.52005411)。
文摘Laser powder bed fusion(L-PBF)of Sc/Zr-modified Al-based alloys has recently become a promising method for developing a new generation of high-performance Al alloys.To clarify the modification roles of Sc/Zr elements,an Al–4.66Mg–0.48Mn–0.72Sc–0.33Zr(wt.%)alloy was processed using L-PBF.The effect of the local solidification condition of the molten pool on the precipitation behavior of primary Al_(3)(Sc,Zr)was analyzed based on time-dependent nucleation theory.It was found that primary Al_(3)(Sc,Zr)inevitably precipitated at the fusion boundary,while its precipitation could be effectively suppressed in the inner region of the molten pool.This subsequently induced the formation of a heterogeneousα-Al matrix.After direct aging,the heredity of solidification microstructure introduced heterogeneous secondary Al_(3)(Sc,Zr)precipitates withinα-Al matrix.Owing to the inverse relationship between grain boundary strengthening and precipitation strengthening,the direct-aged sample with dual heterogeneous structures exhibited reduced mechanical heterogeneity,resulting in lowered hetero-deformation-induced hardening.The low strain-hardening capability in the direct-aged sample promoted necking instability while inducing a large Lüders elongation,which effectively improved the tensile ductility.
基金financially supported by the Natural Science Foundation of Chongqing,China(No.cstc2021jcyj-msxm X0433)the Chongqing Foundation of Science and Technology,China(Nos.cstc2020jxjl X0001,cstc2021jxjl50004)the National Natural Science Foundation of China(No.51601154)。
基金financially supported by the Guangdong Major Project of Basic and Applied Basic Research(No.2020B0301030006)the National Natural Science Foundation of China(Nos.52171133 and 52171103)the“111 Project”(B16007)by the Ministry of Education and Fundamental Research Fund of Central Universities in China(No.2018CDJDCL0019)。
文摘In this study,the deformable titanium(Ti)particles reinforced AZ91 composite was successfully prepared by powder metallurgy and subsequent extrusion.The mechanical properties and microstructural evolution of pure AZ91 and 5 Ti/AZ91 composite were studied.The yield strength,ultimate tensile strength,and elongation of 5 Ti/AZ91 composite are measured to be 212 MPa,323 MPa,and 10.1%,respectively.Microstructure analysis revealed that Ti particles are elongated along the extrusion direction,forming a discontinuous strip Ti particles,fine precipitated Mg_(17)Al_(12) phase inhibits dynamic recrystallization(DRX)behavior through Zener pinning effect and hinders the growth of matrix grains,resulting in refiner grains of 5 Ti/AZ91 composite.Heterogeneous deformed Ti particles and magnesium(Mg)matrix to generate additional heterogeneous deformation-induced(HDI)strengthening.Heterogeneous deformation-induced strengthening mainly contributed to the increment of yield strength for 5 Ti/AZ91 composite.
基金The authors acknowledge the funding support from National Natural Science Foundation of China via grant 51775135.
文摘Slip transfer is influential in determining damage nucleation of polycrystalline material.The interactions between dislocations and grain boundaries(GBs)was investigated using in-situ tension test in a multi-directionally forged Mg-5.4Gd-1.8Y-1.5Zn(wt%)alloy.It was found that strain accommodation of individual grains by means of slip occurred more easily than slip transfer when several slip systems were operable.The basal-basal slip transfer occurred when the GB misorientation was smaller than 34.2°,whereas basal-pyramidal type took place when the crystallographic misorientation was larger than 48.8°.The product of Luster-Morris m factor and the sum of the Schmid factors of the two correlated slip systems indicated that the threshold for basal-basal slip transfer may exist,however,basal-pyramidal slip transfer shows no such threshold and is more complicated.These results presented here demonstrated that besides the geometrical alignment,the deformation details(such as the number of operable slip systems)and stress state in each individual grain must be considered.
