Microstructure transformation and aging hardening behavior of 15-5 PH stainless steel were studied by optical microscopy （OM）, X-ray diffraction （XRD） and transmission electron microscopy （TEM）. The results show...Microstructure transformation and aging hardening behavior of 15-5 PH stainless steel were studied by optical microscopy （OM）, X-ray diffraction （XRD） and transmission electron microscopy （TEM）. The results showed that the 15-5 PH stainless steel consists of NbC precipitates and lath matensite with a high dislocation density after solution treatment. With increasing aging temperature and aging time, the martensitic laths were resolved gradually. Meanwhile, the nanometric-sized Cu precipitates gradually coarsened and lost their coherency with＇the martensite matrix, which exhibited an elliptical shape finally. Fine Cu precipitates can lead to significant dispersion hardening effect, while the coarsened Cu precipitates have no contribution to strengthening. The reversed austenite was observed in the speci- mens aged at 550 ℃ and above; moreover, the amount of reversed austenite increased as aging temperature in- creased. The precipitation hardening behavior of 15-5 PH stainless steel may depend on the balance between the softening caused by the formation of reversed austenite and the hardening caused by the precipitation of copper.展开更多
Alloying is an effective strategy to tailor microstructure and mechanical properties of metallic materials to overcome the strength-ductility trade-off dilemma.In this work,we combined a novel alloy design principle,i...Alloying is an effective strategy to tailor microstructure and mechanical properties of metallic materials to overcome the strength-ductility trade-off dilemma.In this work,we combined a novel alloy design principle,i.e.harvesting pronounced solid solution hardening(SSH)based on the misfit volumes engineering,and simultaneously,architecting the ductile matrix based on the valence electron concentrations(VEC)criterion,to fulfill an excellent strength-ductility synergy for the newly emerging high/medium-entropy alloys(HEAs/MEAs).Based on this strategy,Al/Ta co-doping within NiCoCr MEA leads to an efficient synthetic approach,that is minor Al/Ta co-doping not only renders significantly enhanced strength with notable SSH effect and ultrahigh strain-hardening capability,but also sharply refines grains and induces abnormal twinning behaviors of(NiCoCr)_(92)Al_(6)Ta_(2) MEA.Compared with the partially twinned NiCoCr MEA,the yield strength(σy)and ultimate tensile strength(σUTS)of fully twinned Al/Ta-containing MEA were increased by~102%to~600 MPa and~35%to~1000 MPa,respectively,along with good ductility beyond 50%.Different from the NiCoCr MEA with deformation twins(DTs)/stacking faults(SFs)dominated plasticity,the extraordinary strain-hardening capability of the solute-hardened(NiCoCr)_(92)Al_(6)Ta_(2) MEA,deactivated deformation twinning,originates from the high density of dislocation walls,microbands and abundance of SFs.The abnormal twinning behaviors,i.e.,prevalence of annealing twins(ATs)but absence of DTs in(NiCoCr)_(92)Al_(6)Ta_(2) MEA,are explained in terms of the relaxation of grain boundaries(for ATs)and the twinning mechanism transition(for DTs),respectively.展开更多
The Ti_(p)/ZX60 composites with different Ti_(p) contents were prepared by semi-solid stirring casting.After extrusion,the microstructure,work hardening and softening behavior of the Ti_(p)/ZX60 composites were analyz...The Ti_(p)/ZX60 composites with different Ti_(p) contents were prepared by semi-solid stirring casting.After extrusion,the microstructure,work hardening and softening behavior of the Ti_(p)/ZX60 composites were analyzed compared with the ZX60(Mg-6Zn-0.2Ca)alloy.The results showed that the addition of Ti_(p) could not only promote the nucleation of dynamic recrystallized(DRXed)grains,but also be propitious to the refinement of DRXed grains.With increasing Ti_(p) content,the size of DRXed grains decreased accompanied with increasing volume fraction of DRXed grains.As the Ti_(p) content increased to 15 vol.%,the average size and volume fraction of DRXed grains reached to~0.32μm and 93.2%,respectively.Besides,both the strength and elongation were improved by the addition of Ti_(p).With increasing content of Ti_(p),a substantial increase in the strength was achieved with little change in the elongation.However,the elongation decreased sharply when the Ti_(p) content further increased to 15 vol.%.The addition of Ti_(p) led to an increase in the work hardening rate,which gradually increased with increasing Ti_(p) content.However,the softening rate did not demonstrate the same tendency with increasing Ti_(p) content.Unlike the conventional ceramic particles,the Ti_(p) can be deformed in coordination with the matrix alloy,which imparted a higher softening rate to the matrix alloy.Even though the softening rate improved as the Ti_(p) content increased from 5 to 10 vol.%,it dropped deeply as the Ti_(p) content increased to 15 vol.%owing to the fracture of Ti_(p) during extrusion.展开更多
Accurate prediction of stress-strain behavior of metals as a function of arbitrary temperature and strain rate paths has remained a challenge. The Mechanical Threshold Stress constitutive model is one formalism that h...Accurate prediction of stress-strain behavior of metals as a function of arbitrary temperature and strain rate paths has remained a challenge. The Mechanical Threshold Stress constitutive model is one formalism that has emerged following several decades of research. Vast experience has accumulated with the application of the Mechanical Threshold Stress model over a wide variety of pure metals and alloys. Out of this has arisen common trends across metal systems. The magnitude of activation energies presents one example of this, where these variables consistently increase in magnitude as the obstacle to dislocation motion transitions from short range to long range. Trends in strain hardening are also observed. In Face-Centered Cubic metals the magnitude of strain hardening scales with the stacking fault energy;trends in Body-Centered Cubic metals are less clear. Model parameters derived for over twenty metals and alloys are tabulated. Common trends should guide future application of the MTS model and further model development.展开更多
Herein,the evolution of long-period stacking ordered(LPSO)phases in the as-cast Mg-6Gd-1Zn-0.6Zr(wt.%)alloy are investigated via transmission electron microscopy(TEM)and atom probe tomography(APT).The TEM results reve...Herein,the evolution of long-period stacking ordered(LPSO)phases in the as-cast Mg-6Gd-1Zn-0.6Zr(wt.%)alloy are investigated via transmission electron microscopy(TEM)and atom probe tomography(APT).The TEM results reveal that two types of LPSO phase(a bulky interdendritic phase and a plate-like matrix LPSO phase)are formed in the as-cast sample.Most of the LPSO phases are confirmed to be of the 14H type,with a smaller proportion being of the 18R LPSO.Further,the APT results reveal that the composition of the interdendritic LPSO phase is closer to that of the ideal 14H phase compared to the matrix LPSO phase,and both the interdendritic and matrix LPSO phases exhibit a Gd/Zn ratio of 2.5,thereby indicating a deficient Zn content compared to the ideal 14H phase(i.e.,1.3).In addition,the influence of the LPSO phases on the deformation behavior is investigated at different compressive plastic strains using electron backscatter diffraction(EBSD)analysis to reveal twinning and slip behavior during deformation.The results indicate that the LPSO phase induces additional work hardening in the late stage of deformation via the suppression of{1011}compressive twinning and the activation of non-basal slip systems.展开更多
The size effect of impact abrasive particles on wear and surface hardening behavior of high-manganese steel was studied.Impact wear tests were carried out on MLD-10 tester with abrasive particle sizes of 6.0–0.75 mm,...The size effect of impact abrasive particles on wear and surface hardening behavior of high-manganese steel was studied.Impact wear tests were carried out on MLD-10 tester with abrasive particle sizes of 6.0–0.75 mm,respectively.The results showed that the impact wear behavior and surface hardening mechanism of high-manganese steel were affected by the size of abrasive particles.A critical size of abrasive particle might exhibit to distinguish the impact wear behavior.When the abrasive particle size was larger than 0.75 mm,the wear mass loss generally showed a decreasing trend with the decrease of the abrasive particle size.Dislocation strengthening and mechanical twinning contributed to the good work hardening behavior.However,effective surface hardening layer could not be formed for sample tested with particle size of 0.75 mm and the wear mass loss was the highest among all the conditions.The weak hardening effect led to the sharp increase of the wear mass loss.Press-in abrasives could be observed on the wear surface when the abrasive particle size was larger than 0.75 mm.The press-in abrasives were peeled off from the wear surface and broken,leaving deep grooves and peeling pits.Material exchange with the sample would occur with the flow of abrasives.A large area of furrow was formed on the wear surface.For particle size of 0.75 mm,aggregated abrasives formed a dynamic buffer layer on the surface and the stress distribution was more even.The formation of buffer layer would lower the effect of the impact load and the work hardening effect could not be fully activated.The mutual extrusion among the abrasives,friction wheel and sample caused plastic deformation of the worn surface during impact test.The present study would help guiding to select the application field of high-manganese steel more precisely.展开更多
The microstructure,mechanical properties and fracture behavior of an as-received QE22 alloy have been investigated under different thermal conditions,including solution treated(ST),under aged(UA),peak aged(PA)and over...The microstructure,mechanical properties and fracture behavior of an as-received QE22 alloy have been investigated under different thermal conditions,including solution treated(ST),under aged(UA),peak aged(PA)and over aged(OA)conditions.A significant increase in hardness of 27%,yield strength of 60%and ultimate tensile strength of 19%was observed in peak aged sample as compared to solution treated sample.The improvements of mechanical strength properties are mainly associated with the metastable λ and β′precipitates.Grain growth was not observed in the ST samples after subjecting to UA and PA treatments due to the presence of eutectic Mg_(12)Nd particles along the grain boundaries.In over aged sample,significant grain growth occurred because of dissolution of eutectic phase particles.Different natures of crack initiation and propagation were observed under different thermal conditions during tensile testing at room temperature.The mode of failure of solution treated sample is transgranular,cleavage and twin boundary fractures.A mixed mode of transgranular,intergranular,cleavage and twin boundary failure is observed in both peak aged and over aged samples.展开更多
Microstructure,texture evolution and strain hardening behaviour of the Mg-1Y and Mg-1Zn(wt%)alloys were investigated under room temperature compression.Microstructural characterization was performed by optical microsc...Microstructure,texture evolution and strain hardening behaviour of the Mg-1Y and Mg-1Zn(wt%)alloys were investigated under room temperature compression.Microstructural characterization was performed by optical microscopy,scanning electron microscopy,electron back scattered diffraction and transmission electron microscopy.The experimental results show that Mg-1Zn alloy exhibits conventional three-stage strain hardening curves,while Mg-1Y alloy exhibits novel six-stage strain hardening curves.For Mg-1Y alloy,rare earth texture leads to weak tensile twinning activity in compression and consequently results in a moderate evolution to<0001>texture.Moreover,inefficient tensile twinning activity and weak slip-twinning interaction give rise to excellent ductility and high hardening capacity but low strain hardening rate.For Mg-1Zn alloy,basal texture leads to pronounced tensile twinning activity in compression and consequently results in rapid evolution to<0001>texture.The intense tensile twinning activity and strong slip-twinning interaction lead to high strain hardening rate but poor ductility and low hardening capacity.展开更多
基金Item Sponsored by National High Technology Research and Development Program of China(2012AA03A507)Key Laboratory Foundation of Metal Material Microstructure Control of Jiangxi Province of China(JW201223001)Foundation of Jiangxi Educational Committee of China(GJJ14534)
文摘Microstructure transformation and aging hardening behavior of 15-5 PH stainless steel were studied by optical microscopy （OM）, X-ray diffraction （XRD） and transmission electron microscopy （TEM）. The results showed that the 15-5 PH stainless steel consists of NbC precipitates and lath matensite with a high dislocation density after solution treatment. With increasing aging temperature and aging time, the martensitic laths were resolved gradually. Meanwhile, the nanometric-sized Cu precipitates gradually coarsened and lost their coherency with＇the martensite matrix, which exhibited an elliptical shape finally. Fine Cu precipitates can lead to significant dispersion hardening effect, while the coarsened Cu precipitates have no contribution to strengthening. The reversed austenite was observed in the speci- mens aged at 550 ℃ and above; moreover, the amount of reversed austenite increased as aging temperature in- creased. The precipitation hardening behavior of 15-5 PH stainless steel may depend on the balance between the softening caused by the formation of reversed austenite and the hardening caused by the precipitation of copper.
文摘选取HC700/980DHD+Z、 HC780/980CPD+Z和HC700/980DPD+Z进行分析,对比了3种材料力学性能和极限冷弯性能的差异;基于5种硬化模型对材料性能曲线进行拟合,选取两类拟合度较高的模型构建了组合硬化模型,并采用R5缺口拉伸试验进行了验证;基于前防撞梁静态三点弯曲测试和仿真对标分析,对组合硬化模型进行验证,并对3种材料的承载性能进行对比分析。结果表明:HC700/980DHD+Z和HC780/980CPD+Z的极限冷弯角分别为109.8°和109.6°,优于HC700/980DPD+Z;前纵梁静态三点弯曲试验测试与仿真分析中关键参数的最大误差在6%左右,表明材料本构模型的精度较高;HC780/980CPD+Z的承载力峰值最大,达到15.1 k N;HC700/980DHD+Z达到承载力峰值的位移最大,达到52 mm;屈强比对静态承载过程的峰值力产生重要影响,而断后伸长率的增加提升了材料的强塑积和塑性应变变形,使得承载力峰值的位移增大。
基金supported by the National Natural Science Foundation of China(Grant Nos.51722104,51790482,51621063 and 51625103)the 111 Project 2.0 of China(PB2018008)+1 种基金the National Key Research and Development Program of China(2017YFA0700701)the Fundamental Research Funds for the Central Universities for part of financial support(xtr022019004)。
文摘Alloying is an effective strategy to tailor microstructure and mechanical properties of metallic materials to overcome the strength-ductility trade-off dilemma.In this work,we combined a novel alloy design principle,i.e.harvesting pronounced solid solution hardening(SSH)based on the misfit volumes engineering,and simultaneously,architecting the ductile matrix based on the valence electron concentrations(VEC)criterion,to fulfill an excellent strength-ductility synergy for the newly emerging high/medium-entropy alloys(HEAs/MEAs).Based on this strategy,Al/Ta co-doping within NiCoCr MEA leads to an efficient synthetic approach,that is minor Al/Ta co-doping not only renders significantly enhanced strength with notable SSH effect and ultrahigh strain-hardening capability,but also sharply refines grains and induces abnormal twinning behaviors of(NiCoCr)_(92)Al_(6)Ta_(2) MEA.Compared with the partially twinned NiCoCr MEA,the yield strength(σy)and ultimate tensile strength(σUTS)of fully twinned Al/Ta-containing MEA were increased by~102%to~600 MPa and~35%to~1000 MPa,respectively,along with good ductility beyond 50%.Different from the NiCoCr MEA with deformation twins(DTs)/stacking faults(SFs)dominated plasticity,the extraordinary strain-hardening capability of the solute-hardened(NiCoCr)_(92)Al_(6)Ta_(2) MEA,deactivated deformation twinning,originates from the high density of dislocation walls,microbands and abundance of SFs.The abnormal twinning behaviors,i.e.,prevalence of annealing twins(ATs)but absence of DTs in(NiCoCr)_(92)Al_(6)Ta_(2) MEA,are explained in terms of the relaxation of grain boundaries(for ATs)and the twinning mechanism transition(for DTs),respectively.
基金supported financially by the National Natural Science Foundation of China (Nos.52271109 and 52001223)the authors also thank the Support from the"the National Key Research and Development Program for Young Scientists" (No.2021YFB3703300)the Special Fund Project for Guiding Local Science and Technology Development by the Central Government (No.YDZJSX2021B019).
文摘The Ti_(p)/ZX60 composites with different Ti_(p) contents were prepared by semi-solid stirring casting.After extrusion,the microstructure,work hardening and softening behavior of the Ti_(p)/ZX60 composites were analyzed compared with the ZX60(Mg-6Zn-0.2Ca)alloy.The results showed that the addition of Ti_(p) could not only promote the nucleation of dynamic recrystallized(DRXed)grains,but also be propitious to the refinement of DRXed grains.With increasing Ti_(p) content,the size of DRXed grains decreased accompanied with increasing volume fraction of DRXed grains.As the Ti_(p) content increased to 15 vol.%,the average size and volume fraction of DRXed grains reached to~0.32μm and 93.2%,respectively.Besides,both the strength and elongation were improved by the addition of Ti_(p).With increasing content of Ti_(p),a substantial increase in the strength was achieved with little change in the elongation.However,the elongation decreased sharply when the Ti_(p) content further increased to 15 vol.%.The addition of Ti_(p) led to an increase in the work hardening rate,which gradually increased with increasing Ti_(p) content.However,the softening rate did not demonstrate the same tendency with increasing Ti_(p) content.Unlike the conventional ceramic particles,the Ti_(p) can be deformed in coordination with the matrix alloy,which imparted a higher softening rate to the matrix alloy.Even though the softening rate improved as the Ti_(p) content increased from 5 to 10 vol.%,it dropped deeply as the Ti_(p) content increased to 15 vol.%owing to the fracture of Ti_(p) during extrusion.
文摘Accurate prediction of stress-strain behavior of metals as a function of arbitrary temperature and strain rate paths has remained a challenge. The Mechanical Threshold Stress constitutive model is one formalism that has emerged following several decades of research. Vast experience has accumulated with the application of the Mechanical Threshold Stress model over a wide variety of pure metals and alloys. Out of this has arisen common trends across metal systems. The magnitude of activation energies presents one example of this, where these variables consistently increase in magnitude as the obstacle to dislocation motion transitions from short range to long range. Trends in strain hardening are also observed. In Face-Centered Cubic metals the magnitude of strain hardening scales with the stacking fault energy;trends in Body-Centered Cubic metals are less clear. Model parameters derived for over twenty metals and alloys are tabulated. Common trends should guide future application of the MTS model and further model development.
基金This work was supported by the National Research Foundation of Korea(Grant number:NRF-2019K1A3A1A18116059 and NRF-2023R1A2C200529811)Austrian Science Fund(FWF)(P 32378-N37)Federal Ministry of Austria Education,Science and Research(BMBWF)(KR 06/2020).
文摘Herein,the evolution of long-period stacking ordered(LPSO)phases in the as-cast Mg-6Gd-1Zn-0.6Zr(wt.%)alloy are investigated via transmission electron microscopy(TEM)and atom probe tomography(APT).The TEM results reveal that two types of LPSO phase(a bulky interdendritic phase and a plate-like matrix LPSO phase)are formed in the as-cast sample.Most of the LPSO phases are confirmed to be of the 14H type,with a smaller proportion being of the 18R LPSO.Further,the APT results reveal that the composition of the interdendritic LPSO phase is closer to that of the ideal 14H phase compared to the matrix LPSO phase,and both the interdendritic and matrix LPSO phases exhibit a Gd/Zn ratio of 2.5,thereby indicating a deficient Zn content compared to the ideal 14H phase(i.e.,1.3).In addition,the influence of the LPSO phases on the deformation behavior is investigated at different compressive plastic strains using electron backscatter diffraction(EBSD)analysis to reveal twinning and slip behavior during deformation.The results indicate that the LPSO phase induces additional work hardening in the late stage of deformation via the suppression of{1011}compressive twinning and the activation of non-basal slip systems.
基金The authors are grateful to the support from the Youth Teacher International Exchange&Growth Program(No.QNXM20220024)and the Jianlong Steel Corporation.
文摘The size effect of impact abrasive particles on wear and surface hardening behavior of high-manganese steel was studied.Impact wear tests were carried out on MLD-10 tester with abrasive particle sizes of 6.0–0.75 mm,respectively.The results showed that the impact wear behavior and surface hardening mechanism of high-manganese steel were affected by the size of abrasive particles.A critical size of abrasive particle might exhibit to distinguish the impact wear behavior.When the abrasive particle size was larger than 0.75 mm,the wear mass loss generally showed a decreasing trend with the decrease of the abrasive particle size.Dislocation strengthening and mechanical twinning contributed to the good work hardening behavior.However,effective surface hardening layer could not be formed for sample tested with particle size of 0.75 mm and the wear mass loss was the highest among all the conditions.The weak hardening effect led to the sharp increase of the wear mass loss.Press-in abrasives could be observed on the wear surface when the abrasive particle size was larger than 0.75 mm.The press-in abrasives were peeled off from the wear surface and broken,leaving deep grooves and peeling pits.Material exchange with the sample would occur with the flow of abrasives.A large area of furrow was formed on the wear surface.For particle size of 0.75 mm,aggregated abrasives formed a dynamic buffer layer on the surface and the stress distribution was more even.The formation of buffer layer would lower the effect of the impact load and the work hardening effect could not be fully activated.The mutual extrusion among the abrasives,friction wheel and sample caused plastic deformation of the worn surface during impact test.The present study would help guiding to select the application field of high-manganese steel more precisely.
文摘The microstructure,mechanical properties and fracture behavior of an as-received QE22 alloy have been investigated under different thermal conditions,including solution treated(ST),under aged(UA),peak aged(PA)and over aged(OA)conditions.A significant increase in hardness of 27%,yield strength of 60%and ultimate tensile strength of 19%was observed in peak aged sample as compared to solution treated sample.The improvements of mechanical strength properties are mainly associated with the metastable λ and β′precipitates.Grain growth was not observed in the ST samples after subjecting to UA and PA treatments due to the presence of eutectic Mg_(12)Nd particles along the grain boundaries.In over aged sample,significant grain growth occurred because of dissolution of eutectic phase particles.Different natures of crack initiation and propagation were observed under different thermal conditions during tensile testing at room temperature.The mode of failure of solution treated sample is transgranular,cleavage and twin boundary fractures.A mixed mode of transgranular,intergranular,cleavage and twin boundary failure is observed in both peak aged and over aged samples.
基金Funded by the Beijing Municipal Natural Science Foundation (No.2202004)the National Natural Science Foundation of China (No.51801048)the Basic Research Fund for Newly Enrolled Teachers and the Fund for Distinguished Young Scholars of China Academy of Space Technology。
文摘Microstructure,texture evolution and strain hardening behaviour of the Mg-1Y and Mg-1Zn(wt%)alloys were investigated under room temperature compression.Microstructural characterization was performed by optical microscopy,scanning electron microscopy,electron back scattered diffraction and transmission electron microscopy.The experimental results show that Mg-1Zn alloy exhibits conventional three-stage strain hardening curves,while Mg-1Y alloy exhibits novel six-stage strain hardening curves.For Mg-1Y alloy,rare earth texture leads to weak tensile twinning activity in compression and consequently results in a moderate evolution to<0001>texture.Moreover,inefficient tensile twinning activity and weak slip-twinning interaction give rise to excellent ductility and high hardening capacity but low strain hardening rate.For Mg-1Zn alloy,basal texture leads to pronounced tensile twinning activity in compression and consequently results in rapid evolution to<0001>texture.The intense tensile twinning activity and strong slip-twinning interaction lead to high strain hardening rate but poor ductility and low hardening capacity.
