The kinetic characteristics of W grain growth operated by diffusion controlled Oswald ripening （DOR） during liquid phase sintering were studied. A liquid phase sintering of W-15wt%Cu was carried out by pushing compa...The kinetic characteristics of W grain growth operated by diffusion controlled Oswald ripening （DOR） during liquid phase sintering were studied. A liquid phase sintering of W-15wt%Cu was carried out by pushing compacts into a furnace at the moment when the temperature increased to 1340℃ for different sintering times. The results show that liquid phase sintering produces the compacts with considerably low relative density and inversely, rather high homogeneity. On the basis of the data extracted from the SEM images, the kinetic equation of W grain growth, G^n = G0^n ＋ kt, is determined in which the grain growth exponent n is 3 and the grain growth rate constant k is 0.15 μm^3/s. The cumulative normalized grain size distributions produced by different sintering times show self-similar. The cumulative distribution function is extracted from the curves by non-linear fitting. In addition, the sintering kinetic characteristics of W-15wt%Cu compacts were also investigated.展开更多
A new Monte Carlo simulation method for studying three-dimensional microstructures as well as their evolution in polycrystalline materials has been set up. The algorithm is simple and flexible to apply. With the prese...A new Monte Carlo simulation method for studying three-dimensional microstructures as well as their evolution in polycrystalline materials has been set up. The algorithm is simple and flexible to apply. With the present method, kinetics of three-dimensional grain growth is accurately reflected and the simulation efficiency is greatly improved. The simulation can not only be used reliably to analyze quantitatively the microstructures and their evolution, but also be used conveniently to observe microstructures as well as their evolution on the horizontal section and the sections at any angle to the horizontal plane, to measure the characteristic parameters in three dimensions and cross-sections, together with their relationships between the two systems, and to many other aspects.展开更多
In situ observations of austenite grain growth in Fe-C-Mn-Si super bainitic steel were conducted on a high-temperature laser scanning confocal microscope during continuous heating and subsequent isothermal holding at ...In situ observations of austenite grain growth in Fe-C-Mn-Si super bainitic steel were conducted on a high-temperature laser scanning confocal microscope during continuous heating and subsequent isothermal holding at 850, 1000, and 1100℃ for 30 min. A grain growth model was proposed based on experimental results. It is indicated that the austenite grain size increases with austenitizing temperature and holding time. When the austenitizing temperature is above 1100℃, the austenite grains grow rapidly, and abnormal austenite grains occur. In addition, the effect of heating rate on austenite grain growth was investigated, and the relation between austenite grains and bainite morphology after bainitic transformations was also discussed.展开更多
Ultra-fine austenite grains with size of i-3 μm were prepared in a Nb-V-Ti steel through repetitive treatment of rapid heating and quenching. A model for the growth kinetics of these ultra-fine austenite grains was s...Ultra-fine austenite grains with size of i-3 μm were prepared in a Nb-V-Ti steel through repetitive treatment of rapid heating and quenching. A model for the growth kinetics of these ultra-fine austenite grains was successfully created through successive 2 processes, and the activation energy Q for growth was estimated to be about 693.2 kJ/mol, which directly shows the inhibition effect of microalloy elements on the growth of ultra-fine austenite grains.展开更多
The microstructures and their kinetics of normal grain growth are simulated using different Monte Carlo （MC） algorithms. Compared with the relative figures and the theoretical normal grain growth exponents of n =0.5...The microstructures and their kinetics of normal grain growth are simulated using different Monte Carlo （MC） algorithms. Compared with the relative figures and the theoretical normal grain growth exponents of n =0.5, the effects of some factors of MC algorithm, i.e. the lattice types, the methods of selecting lattice sites, and the neighbors selection for energy calculations, on the simulation results of grain growth are studied. Two methods of regression were compared, and the three-parameter nonlinear regression is much more suitable for fitting the grain growth kinetics. A better model with appropriate factors included triangular lattice, the attempted site randomly selected, and the first and second nearest neighbors for energy calculations is obtained.展开更多
基金This work was financially supported by the National Natural Science Foundation of China (No. 50174007).
文摘The kinetic characteristics of W grain growth operated by diffusion controlled Oswald ripening （DOR） during liquid phase sintering were studied. A liquid phase sintering of W-15wt%Cu was carried out by pushing compacts into a furnace at the moment when the temperature increased to 1340℃ for different sintering times. The results show that liquid phase sintering produces the compacts with considerably low relative density and inversely, rather high homogeneity. On the basis of the data extracted from the SEM images, the kinetic equation of W grain growth, G^n = G0^n ＋ kt, is determined in which the grain growth exponent n is 3 and the grain growth rate constant k is 0.15 μm^3/s. The cumulative normalized grain size distributions produced by different sintering times show self-similar. The cumulative distribution function is extracted from the curves by non-linear fitting. In addition, the sintering kinetic characteristics of W-15wt%Cu compacts were also investigated.
文摘A new Monte Carlo simulation method for studying three-dimensional microstructures as well as their evolution in polycrystalline materials has been set up. The algorithm is simple and flexible to apply. With the present method, kinetics of three-dimensional grain growth is accurately reflected and the simulation efficiency is greatly improved. The simulation can not only be used reliably to analyze quantitatively the microstructures and their evolution, but also be used conveniently to observe microstructures as well as their evolution on the horizontal section and the sections at any angle to the horizontal plane, to measure the characteristic parameters in three dimensions and cross-sections, together with their relationships between the two systems, and to many other aspects.
基金the National Natural Science Foundation of China(No.51274154)the National High-Tech Research and Development Program of China(No.2012AA03A504)+1 种基金the State Key Laboratory of Development and Application Technology of Automo-tive Steels(Baosteel Group)the Key Project of Hubei Education Committee(No.D20121101)
文摘In situ observations of austenite grain growth in Fe-C-Mn-Si super bainitic steel were conducted on a high-temperature laser scanning confocal microscope during continuous heating and subsequent isothermal holding at 850, 1000, and 1100℃ for 30 min. A grain growth model was proposed based on experimental results. It is indicated that the austenite grain size increases with austenitizing temperature and holding time. When the austenitizing temperature is above 1100℃, the austenite grains grow rapidly, and abnormal austenite grains occur. In addition, the effect of heating rate on austenite grain growth was investigated, and the relation between austenite grains and bainite morphology after bainitic transformations was also discussed.
基金supported by the National Natural Science Foundation of China(No.50527402)
文摘Ultra-fine austenite grains with size of i-3 μm were prepared in a Nb-V-Ti steel through repetitive treatment of rapid heating and quenching. A model for the growth kinetics of these ultra-fine austenite grains was successfully created through successive 2 processes, and the activation energy Q for growth was estimated to be about 693.2 kJ/mol, which directly shows the inhibition effect of microalloy elements on the growth of ultra-fine austenite grains.
基金the International Science & Technology Cooperation Project of Shandong Province(2006)the Natural Science Foundation of Shandong Province(Y2007F06).
文摘The microstructures and their kinetics of normal grain growth are simulated using different Monte Carlo （MC） algorithms. Compared with the relative figures and the theoretical normal grain growth exponents of n =0.5, the effects of some factors of MC algorithm, i.e. the lattice types, the methods of selecting lattice sites, and the neighbors selection for energy calculations, on the simulation results of grain growth are studied. Two methods of regression were compared, and the three-parameter nonlinear regression is much more suitable for fitting the grain growth kinetics. A better model with appropriate factors included triangular lattice, the attempted site randomly selected, and the first and second nearest neighbors for energy calculations is obtained.
