Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Ther...Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.展开更多
The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO sof...The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO software were conducted to obtain the composition dependence of the MCSRO undercooling in Zr Ni Cu, Zr Si Cu and Pd Si Cu ternary systems. By the MCSRO undercooling principle, the composition range of Zr Ni Cu system with optimum GFA is determined to be 62.5 ～ 75 Zr, 5～ 20 Cu, 12.5 ～ 25 Ni ( n (Ni)/ n (Cu)=1～5). The TTT curves of Zr Ni Cu system were also calculated based on the MCSRO model. The critical cooling rates for Zr based alloy with deep MSCRO undercooling are estimated to be as low as 100?K/s, which is consistent with the practical cooling rate in the preparation of Zr based bulk metallic glass (BMG). The calculation also illustrates that the easy glass forming systems such as Pd based alloys exhibit an extraordinary deep MCSRO undercooling. It is shown that the thermodynamic model of MCSRO provides an effective method for the alloy designing of BMG.展开更多
Cu47Ti34Zr11Ni8 and (Cu47Ti34Zr11Ni8)_ 99Al bulk metallic glass with size of 1mm×10mm×50mm were prepared by copper mold casting, and the influence of minor aluminium addition upon the alloy thermal sta...Cu47Ti34Zr11Ni8 and (Cu47Ti34Zr11Ni8)_ 99Al bulk metallic glass with size of 1mm×10mm×50mm were prepared by copper mold casting, and the influence of minor aluminium addition upon the alloy thermal stability and mechanical properties was studied. The results indicate that with the aluminium addition, the crystallizing behavior of the melt changes at the same cooling rate, and the crystallizing behavior of the glass changes at the same heating rate. The glass transition temperature(T_g), crystallization temperature(T_ x1), temperature interval of supercooled liquid region ΔT_x (=T_ x1-T_g) and reduced glass transition temperature (T_ rg) are proved to be changed from 672K, 734K, 62K and 0.578 to 681K, 729K, 48K and 0.590, respectively. Because of the addition of aluminium, three point-bending flexural strength and flexural modulus of the bulk glass are increased from 2350MPa and 102GPa to 2970MPa and 108GPa, respectively.展开更多
A new microstructure model is developed for amorphous alloys,so called Cluster medel, in which the amorphous phase is thought of composing of randomly distributed ordered clusters of different sizes.Thermodynamic calc...A new microstructure model is developed for amorphous alloys,so called Cluster medel, in which the amorphous phase is thought of composing of randomly distributed ordered clusters of different sizes.Thermodynamic calculation on this model deduces a parameter describing the glass forming ability of metallic alloys:α_c=(1-2.08/Φ_m)T_g/T_m,where T_g is gass transition temperature,T_m is the melting temperature,and Φ_m is entralpy change of melting.It is believed that easy glass forming alloy systems have larger values of a_c.This new criterion of GFA not only provides the theoretical background for several GFA criteria in the literature cited,but also can predict the GFA of many alloy systems more reasonably and accurately.展开更多
基金Project supported by the National Science Foundation for 0utstanding Young Scientists of China （Grant No 50125101）.
文摘Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.
文摘The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO software were conducted to obtain the composition dependence of the MCSRO undercooling in Zr Ni Cu, Zr Si Cu and Pd Si Cu ternary systems. By the MCSRO undercooling principle, the composition range of Zr Ni Cu system with optimum GFA is determined to be 62.5 ～ 75 Zr, 5～ 20 Cu, 12.5 ～ 25 Ni ( n (Ni)/ n (Cu)=1～5). The TTT curves of Zr Ni Cu system were also calculated based on the MCSRO model. The critical cooling rates for Zr based alloy with deep MSCRO undercooling are estimated to be as low as 100?K/s, which is consistent with the practical cooling rate in the preparation of Zr based bulk metallic glass (BMG). The calculation also illustrates that the easy glass forming systems such as Pd based alloys exhibit an extraordinary deep MCSRO undercooling. It is shown that the thermodynamic model of MCSRO provides an effective method for the alloy designing of BMG.
文摘Cu47Ti34Zr11Ni8 and (Cu47Ti34Zr11Ni8)_ 99Al bulk metallic glass with size of 1mm×10mm×50mm were prepared by copper mold casting, and the influence of minor aluminium addition upon the alloy thermal stability and mechanical properties was studied. The results indicate that with the aluminium addition, the crystallizing behavior of the melt changes at the same cooling rate, and the crystallizing behavior of the glass changes at the same heating rate. The glass transition temperature(T_g), crystallization temperature(T_ x1), temperature interval of supercooled liquid region ΔT_x (=T_ x1-T_g) and reduced glass transition temperature (T_ rg) are proved to be changed from 672K, 734K, 62K and 0.578 to 681K, 729K, 48K and 0.590, respectively. Because of the addition of aluminium, three point-bending flexural strength and flexural modulus of the bulk glass are increased from 2350MPa and 102GPa to 2970MPa and 108GPa, respectively.
文摘A new microstructure model is developed for amorphous alloys,so called Cluster medel, in which the amorphous phase is thought of composing of randomly distributed ordered clusters of different sizes.Thermodynamic calculation on this model deduces a parameter describing the glass forming ability of metallic alloys:α_c=(1-2.08/Φ_m)T_g/T_m,where T_g is gass transition temperature,T_m is the melting temperature,and Φ_m is entralpy change of melting.It is believed that easy glass forming alloy systems have larger values of a_c.This new criterion of GFA not only provides the theoretical background for several GFA criteria in the literature cited,but also can predict the GFA of many alloy systems more reasonably and accurately.
