Distributions of electromagnetic fields and induced forced flow inside a metal melt are crucial to understand the grain refinement of the metal driven by pulsed magneto-oscillation(PMO).In the present study,PMO-induce...Distributions of electromagnetic fields and induced forced flow inside a metal melt are crucial to understand the grain refinement of the metal driven by pulsed magneto-oscillation(PMO).In the present study,PMO-induced electromagnetic fields and forced flow in Ga-20 wt%In-12 wt%Sn liquid metal have been systematically investigated by performing numerical simulations and corresponding experimental measurements.The numerical simulations have been confirmed by magnetic and melt flow measurements.According to the simulated distribution of electromagnetic fields under the application of PMO,the strongest magnetic field,electric eddy current and Lorentz force with inward radial direction inside the melt are concentrated adjacent the sidewall of cylindrical melt at the cross section of middle height of coil.As a result,a global forced flow throughout the whole cylindrical column filled with Ga-20 wt%In-12 wt%Snmelt is initiated with a flow structure of two pair of symmetric vortexring.The PMO-induced electromagnetic fields and forced flow in Al-7 wt%Si melt have been numerically simulated.The contribution of electromagnetic fields and forced flow to the grain refinement of Al-7 wt%Sialloy under the application of PMO is discussed.It indicates that the forced flow may play a key role in the grain size reduction.展开更多
An experimental investigation is described for the characteristics of convective boiling flow instabilities in horizontally helically coiled tubes using a steam-water two-phase closed circulation test loop at pressure...An experimental investigation is described for the characteristics of convective boiling flow instabilities in horizontally helically coiled tubes using a steam-water two-phase closed circulation test loop at pressure from 0.5 MPa to 3.5 MPa. Three kinds of oscillation are reported: density waves; pressure drop excursions; thermal fluctuations. We describe their dependence on main system parameters such as system pressure, mass flowrate, inlet subcooling, compressible volume and heat flux. Utilizing the experimental data together with conservation constraints, a dimensionless correlation is proposed for the occurrence of density waves.展开更多
Numerical simulation based on phase field method is performed to describe solidification process of pure material in a free or forced flow. The evolution of the interface is showed, and the effects of mesh grid and fl...Numerical simulation based on phase field method is performed to describe solidification process of pure material in a free or forced flow. The evolution of the interface is showed, and the effects of mesh grid and flow velocity on succinonitrite shape are studied. These results indicate that crystal grows into an equiaxial dendrite in a free flow and into an asymmetrical dendritic in a forced flow. With increasing flow velocity, the upstream dendritic arm tip grows faster and the downstream arm grows slower. However, the evolution of the perpendicular tip has no significant change. In addition, mesh grid has no influence on dendritic growth shape when mesh grid is above 300×300.展开更多
Conventional conductivity methods for measuring the void fraction in gas-liquid multiphase systems are typically affected by accuracy problems due to the presence of fluid flow and salinity.This study presents a novel...Conventional conductivity methods for measuring the void fraction in gas-liquid multiphase systems are typically affected by accuracy problems due to the presence of fluid flow and salinity.This study presents a novel approach for determining the void fraction based on a reciprocating dynamic conductivity probe used to measure the liquid film thickness under forced annular-flow conditions.The measurement system comprises a cyclone,a conductivity probe,a probe reciprocating device,and a data acquisition and processing system.This method ensures that the flow pattern is adjusted to a forced annular flow,thereby minimizing the influence of complex and variable gas-liquid flow patterns on the measurement results;Moreover,it determines the liquid film thickness solely according to circuit connectivity rather than specific conductivity values,thereby mitigating the impact of salinity.The reliability of the measurement system is demonstrated through laboratory experiments.The experimental results indicate that,in a range of gas phase superficial velocities 5–20 m/s and liquid phase superficial velocities 0.079–0.48 m/s,the maximum measurement deviation for the void fraction is 4.23%.展开更多
The phase-field model coupled with a flow field was used to simulate the solidification of pure materials by the finite difference method. The effects of initial crystal radius, the space step and the interface thickn...The phase-field model coupled with a flow field was used to simulate the solidification of pure materials by the finite difference method. The effects of initial crystal radius, the space step and the interface thickness on the dendrite growth were studied. Results indicate that the grain grows into an equiaxial dendrite during free flow and into a typical branched structure under forced flow. The radius of an initial crystal can affect the growth of side-branches but not the stability of the dendrite＇s tip when an appropriate value is assigned to it. With an increase in space steps, side-branches appear at the upstream of the longitudinal principal branch and they grow rapidly. With an increase in the interface thickness, the trunk of the longitudinal upstream and lateral principal branches grow longer and become more slender while the number of secondary branches increases.展开更多
For obtaining the finer grains of magnesium alloy,a novel combined pulsed magnetic field with different initial phases,also called out-ofphase pulsed magnetic field(OPPMF),was applied to study the solidification struc...For obtaining the finer grains of magnesium alloy,a novel combined pulsed magnetic field with different initial phases,also called out-ofphase pulsed magnetic field(OPPMF),was applied to study the solidification structure of AZ80 magnesium alloy.The numerical simulation was simultaneously conducted to investigate the refinement mechanisms.The experimental results showed that the macrostructure could be effectively refined by applying external magnetic field.Meanwhile,finer grains were obtained with the higher current intensity.However,the increase of current intensity could only refine the grains to about 0.5 mm.Furthermore,compared to a single pulsed magnetic field(PMF)and alternating series of OPPMF(Connection II),a finer structure was observed when the consecutive series of OPPMF(Connection I)was imposed.In contrast with a single PMF and Connection II,the numerical results showed that the greater axial Lorentz force was obtained under the Connection I,generating the stronger forced flow in the melt.It is believed that abundant nuclei could detach from the mold wall and move faster into the interior melt due to the stronger forced flow;besides,the lower superheat and greater temperature uniformity in bulk melt were realized,accounting for the finest structures under the Connection I.展开更多
The effects of forced flows at different velocities on microstructure and solute distribution during the directional solidification of Sn-10 wt% Bi alloys under a simultaneous imposition of a transverse static magneti...The effects of forced flows at different velocities on microstructure and solute distribution during the directional solidification of Sn-10 wt% Bi alloys under a simultaneous imposition of a transverse static magnetic field(TSMF) and an external direct current(DC) have been investigated experimentally and numerically. The experimental results show that the solid-liquid interface will gradually become sloping with the increase of the forced flow velocity when the thermoelectric magnetic convection(TEMC)dominates the forced flow at solidification front. However, the interface will gradually become planar as the flow velocity further increases when the electromagnetic convection(EMC) dominates the forced flow. Moreover, when the flow velocity gradually increases, the primary dendrite spacing decreases from384 to 105 μm accordingly. The simulation results show that the solute distribution at the two sides of the sample can be significantly changed by the forced flow at solidification front. The rejected solute will be unidirectionally transported to one side of the sample along the TEMC(a low-velocity forced flow),thereby causing the formation of a sloping interface. However, the rejected solute will be returned back along the EMC(a higher-velocity force flow), which results in a planar interface. Furthermore, the solute content at the two sides of the sample under the forced flows at different velocities was measured. The results are in good agreement with the simulation results, which shows that the solute content difference between the two sides of the sample reaches the maximum when a 0.5 T TSMF is applied, while the solute content difference decreases to zero with a simultaneous application of a 0.5 T TSMF and a 1.6 × 10~5 A/m^2 external DC.展开更多
基金the National Key Research and Development Program of China(Grant No.2017YFB0304205)the National Natural Science Foundation of China(Grant Nos.U1760204,51704210)。
文摘Distributions of electromagnetic fields and induced forced flow inside a metal melt are crucial to understand the grain refinement of the metal driven by pulsed magneto-oscillation(PMO).In the present study,PMO-induced electromagnetic fields and forced flow in Ga-20 wt%In-12 wt%Sn liquid metal have been systematically investigated by performing numerical simulations and corresponding experimental measurements.The numerical simulations have been confirmed by magnetic and melt flow measurements.According to the simulated distribution of electromagnetic fields under the application of PMO,the strongest magnetic field,electric eddy current and Lorentz force with inward radial direction inside the melt are concentrated adjacent the sidewall of cylindrical melt at the cross section of middle height of coil.As a result,a global forced flow throughout the whole cylindrical column filled with Ga-20 wt%In-12 wt%Snmelt is initiated with a flow structure of two pair of symmetric vortexring.The PMO-induced electromagnetic fields and forced flow in Al-7 wt%Si melt have been numerically simulated.The contribution of electromagnetic fields and forced flow to the grain refinement of Al-7 wt%Sialloy under the application of PMO is discussed.It indicates that the forced flow may play a key role in the grain size reduction.
文摘An experimental investigation is described for the characteristics of convective boiling flow instabilities in horizontally helically coiled tubes using a steam-water two-phase closed circulation test loop at pressure from 0.5 MPa to 3.5 MPa. Three kinds of oscillation are reported: density waves; pressure drop excursions; thermal fluctuations. We describe their dependence on main system parameters such as system pressure, mass flowrate, inlet subcooling, compressible volume and heat flux. Utilizing the experimental data together with conservation constraints, a dimensionless correlation is proposed for the occurrence of density waves.
基金supported by the Major Program of the National Natural Science Foundation of China (Nos.50331040 and 60171034).
文摘Numerical simulation based on phase field method is performed to describe solidification process of pure material in a free or forced flow. The evolution of the interface is showed, and the effects of mesh grid and flow velocity on succinonitrite shape are studied. These results indicate that crystal grows into an equiaxial dendrite in a free flow and into an asymmetrical dendritic in a forced flow. With increasing flow velocity, the upstream dendritic arm tip grows faster and the downstream arm grows slower. However, the evolution of the perpendicular tip has no significant change. In addition, mesh grid has no influence on dendritic growth shape when mesh grid is above 300×300.
基金the National Natural Science Foundation of China(No.62173049)the Open Fund of the Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering(Yangtze University),YQZC202309.
文摘Conventional conductivity methods for measuring the void fraction in gas-liquid multiphase systems are typically affected by accuracy problems due to the presence of fluid flow and salinity.This study presents a novel approach for determining the void fraction based on a reciprocating dynamic conductivity probe used to measure the liquid film thickness under forced annular-flow conditions.The measurement system comprises a cyclone,a conductivity probe,a probe reciprocating device,and a data acquisition and processing system.This method ensures that the flow pattern is adjusted to a forced annular flow,thereby minimizing the influence of complex and variable gas-liquid flow patterns on the measurement results;Moreover,it determines the liquid film thickness solely according to circuit connectivity rather than specific conductivity values,thereby mitigating the impact of salinity.The reliability of the measurement system is demonstrated through laboratory experiments.The experimental results indicate that,in a range of gas phase superficial velocities 5–20 m/s and liquid phase superficial velocities 0.079–0.48 m/s,the maximum measurement deviation for the void fraction is 4.23%.
基金supported by a Program of the Lanzhou Science and Technology Bureau (No.2009-1-9)the Doctoral Fund of Lanzhou University of Technology(No.SB01200606)
文摘The phase-field model coupled with a flow field was used to simulate the solidification of pure materials by the finite difference method. The effects of initial crystal radius, the space step and the interface thickness on the dendrite growth were studied. Results indicate that the grain grows into an equiaxial dendrite during free flow and into a typical branched structure under forced flow. The radius of an initial crystal can affect the growth of side-branches but not the stability of the dendrite＇s tip when an appropriate value is assigned to it. With an increase in space steps, side-branches appear at the upstream of the longitudinal principal branch and they grow rapidly. With an increase in the interface thickness, the trunk of the longitudinal upstream and lateral principal branches grow longer and become more slender while the number of secondary branches increases.
基金This work was supported by the National Key Re-search and Development Program of China(Grant No.2016YFB0301101)the National Natural Science Foundation of China(Grant No.51971054)the Fundamental Research Funds for the Central Universities(Grant No.N180904006 and N2009006).
文摘For obtaining the finer grains of magnesium alloy,a novel combined pulsed magnetic field with different initial phases,also called out-ofphase pulsed magnetic field(OPPMF),was applied to study the solidification structure of AZ80 magnesium alloy.The numerical simulation was simultaneously conducted to investigate the refinement mechanisms.The experimental results showed that the macrostructure could be effectively refined by applying external magnetic field.Meanwhile,finer grains were obtained with the higher current intensity.However,the increase of current intensity could only refine the grains to about 0.5 mm.Furthermore,compared to a single pulsed magnetic field(PMF)and alternating series of OPPMF(Connection II),a finer structure was observed when the consecutive series of OPPMF(Connection I)was imposed.In contrast with a single PMF and Connection II,the numerical results showed that the greater axial Lorentz force was obtained under the Connection I,generating the stronger forced flow in the melt.It is believed that abundant nuclei could detach from the mold wall and move faster into the interior melt due to the stronger forced flow;besides,the lower superheat and greater temperature uniformity in bulk melt were realized,accounting for the finest structures under the Connection I.
基金financially supported by the National Key Research and Development Program of China (No.2016YFB0301401)the National Natural Science Foundation of China (No.U1732276)+1 种基金the Science and Technology Commission of Shanghai Municipality (Key Project Nos.13JC1402500 and 15520711000)the Independent Research and Development Project of State Key of Advanced Special Steel,Shanghai University (Nos.SKLASS2015-Z021 and SELF-2014-02)
文摘The effects of forced flows at different velocities on microstructure and solute distribution during the directional solidification of Sn-10 wt% Bi alloys under a simultaneous imposition of a transverse static magnetic field(TSMF) and an external direct current(DC) have been investigated experimentally and numerically. The experimental results show that the solid-liquid interface will gradually become sloping with the increase of the forced flow velocity when the thermoelectric magnetic convection(TEMC)dominates the forced flow at solidification front. However, the interface will gradually become planar as the flow velocity further increases when the electromagnetic convection(EMC) dominates the forced flow. Moreover, when the flow velocity gradually increases, the primary dendrite spacing decreases from384 to 105 μm accordingly. The simulation results show that the solute distribution at the two sides of the sample can be significantly changed by the forced flow at solidification front. The rejected solute will be unidirectionally transported to one side of the sample along the TEMC(a low-velocity forced flow),thereby causing the formation of a sloping interface. However, the rejected solute will be returned back along the EMC(a higher-velocity force flow), which results in a planar interface. Furthermore, the solute content at the two sides of the sample under the forced flows at different velocities was measured. The results are in good agreement with the simulation results, which shows that the solute content difference between the two sides of the sample reaches the maximum when a 0.5 T TSMF is applied, while the solute content difference decreases to zero with a simultaneous application of a 0.5 T TSMF and a 1.6 × 10~5 A/m^2 external DC.
