The fluorine-free MXene was prepared by Lewis acid salt etching of ternary layered ceramic MAX phase material.The structure of fluorine-free MXene was characterized by scanning electron microscopy(SEM)and X-ray diffra...The fluorine-free MXene was prepared by Lewis acid salt etching of ternary layered ceramic MAX phase material.The structure of fluorine-free MXene was characterized by scanning electron microscopy(SEM)and X-ray diffractometry(XRD).The study finds that the layer spacing of fluorine-free MXene is approximately twice that of MXene etched by the liquid-phase method,compared to the conventional liquidphase method.It also has greater capacitive properties.Therefore,the MXene prepared by this method shows a great potential for application in the field of capacitors.展开更多
Fluorinated salts and/or high salt concentrations are usually necessary to produce protective films on the electrodes for high-voltage aqueous batteries,yet these approaches increase the cost,toxicity and reaction res...Fluorinated salts and/or high salt concentrations are usually necessary to produce protective films on the electrodes for high-voltage aqueous batteries,yet these approaches increase the cost,toxicity and reaction resistances of battery.Herein,we report a dilute fluorine-free electrolyte design to overcome this dilemma.By using the LiClO_(4) salt and polyethylene glycol dimethyl ether(PED)solvent and optimizing the LiClO_(4)/PED/H_(2)O molar ratio,we formulate a 1 mol kg^(-1)3 V-class hybrid aqueous electrolyte that enables reversible charge/discharge of 2.5 V LiMn_(2)O_(4)|Li_(4)Ti_(5)O_(12) full cell at both low(0.5C,92.4%capacity retention in 300 cycles)and high(5C,80.4%capacity retention in 2000 cycles)rates.This excellent performance is reached even without the generation of protective film on either anode or cathode as identified by in/ex situ characterizations.The selection of appropriate ingredients that have both high stability and strong interactions with water is critical to widen the potential window of electrolyte while suppressing parasitic reactions on the electrodes.This work suggests that expensive and toxic fluorinate salts are no longer necessary for 3 V-class aqueous electrolytes,boosting the development of low-cost,environmentally-friendly,high-power and high-energy-density aqueous batteries.展开更多
Mold flux serves the crucial metallurgical function of absorbing inclusions, directly impacting the smoothness of the casting process as well as the cast slab quality. In this study, the dissolution behavior and mecha...Mold flux serves the crucial metallurgical function of absorbing inclusions, directly impacting the smoothness of the casting process as well as the cast slab quality. In this study, the dissolution behavior and mechanism of Ti O_(2)and Ti N inclusions in molten Ca O–Si O_(2)–B_(2)O_(3)-based fluorine-free mold flux were explored by in situ single hot thermocouple technology combined with X-ray photoelectron spectroscopy.The results showed that Ti O_(2) inclusions are effectively dissolved by the molten slag within 76 s, during which the original octahedral [Ti O_(6)]^(8-)structures are destroyed and convert to the networker tetrahedral [Ti O_(4)]^(4-)structures. However, the dissolution rate is much lower for Ti N inclusions than for Ti O_(2)inclusions. This can be attributed to the fact that the Ti N particles need to be oxidized and then dissolved in the molten slag to form tetrahedral [Ti O4]4-and octahedral [Ti O_(6)]^(8-)structures during the Ti N inclusion dissolution process, which is accompanied by the generation of a large amount of N_(2)gas. Moreover, Ca Ti O_(3)crystals tend to nucleate and grow on bubble surfaces with sufficient octahedral [Ti O_(6)]^(8-)structures and Ca^(2+)ions, eventually resulting in the molten slag being in a solid–liquid mixed state.展开更多
基金Funded by the National Natural Science Foundation of China Youth Program (51302073)the Green Light Materials Hubei Key Laboratory Open Fund (202027B11)。
文摘The fluorine-free MXene was prepared by Lewis acid salt etching of ternary layered ceramic MAX phase material.The structure of fluorine-free MXene was characterized by scanning electron microscopy(SEM)and X-ray diffractometry(XRD).The study finds that the layer spacing of fluorine-free MXene is approximately twice that of MXene etched by the liquid-phase method,compared to the conventional liquidphase method.It also has greater capacitive properties.Therefore,the MXene prepared by this method shows a great potential for application in the field of capacitors.
基金supported by the Westlake Education Foundation and National Natural Science Foundation of China(21975207)。
文摘Fluorinated salts and/or high salt concentrations are usually necessary to produce protective films on the electrodes for high-voltage aqueous batteries,yet these approaches increase the cost,toxicity and reaction resistances of battery.Herein,we report a dilute fluorine-free electrolyte design to overcome this dilemma.By using the LiClO_(4) salt and polyethylene glycol dimethyl ether(PED)solvent and optimizing the LiClO_(4)/PED/H_(2)O molar ratio,we formulate a 1 mol kg^(-1)3 V-class hybrid aqueous electrolyte that enables reversible charge/discharge of 2.5 V LiMn_(2)O_(4)|Li_(4)Ti_(5)O_(12) full cell at both low(0.5C,92.4%capacity retention in 300 cycles)and high(5C,80.4%capacity retention in 2000 cycles)rates.This excellent performance is reached even without the generation of protective film on either anode or cathode as identified by in/ex situ characterizations.The selection of appropriate ingredients that have both high stability and strong interactions with water is critical to widen the potential window of electrolyte while suppressing parasitic reactions on the electrodes.This work suggests that expensive and toxic fluorinate salts are no longer necessary for 3 V-class aqueous electrolytes,boosting the development of low-cost,environmentally-friendly,high-power and high-energy-density aqueous batteries.
基金financially supported by the Fellowship of China National Postdoctoral Program for Innovative Talents(No.BX20220357)the National Science Foundation of China (No.52130408)。
文摘Mold flux serves the crucial metallurgical function of absorbing inclusions, directly impacting the smoothness of the casting process as well as the cast slab quality. In this study, the dissolution behavior and mechanism of Ti O_(2)and Ti N inclusions in molten Ca O–Si O_(2)–B_(2)O_(3)-based fluorine-free mold flux were explored by in situ single hot thermocouple technology combined with X-ray photoelectron spectroscopy.The results showed that Ti O_(2) inclusions are effectively dissolved by the molten slag within 76 s, during which the original octahedral [Ti O_(6)]^(8-)structures are destroyed and convert to the networker tetrahedral [Ti O_(4)]^(4-)structures. However, the dissolution rate is much lower for Ti N inclusions than for Ti O_(2)inclusions. This can be attributed to the fact that the Ti N particles need to be oxidized and then dissolved in the molten slag to form tetrahedral [Ti O4]4-and octahedral [Ti O_(6)]^(8-)structures during the Ti N inclusion dissolution process, which is accompanied by the generation of a large amount of N_(2)gas. Moreover, Ca Ti O_(3)crystals tend to nucleate and grow on bubble surfaces with sufficient octahedral [Ti O_(6)]^(8-)structures and Ca^(2+)ions, eventually resulting in the molten slag being in a solid–liquid mixed state.
