Fluidic oscillators(FOs)can be used as an efficient fluidic vibration tool to solve high friction problems in extended-reach wells.However,the complex mechanism of FOs makes the design challenging,and the dynamic eros...Fluidic oscillators(FOs)can be used as an efficient fluidic vibration tool to solve high friction problems in extended-reach wells.However,the complex mechanism of FOs makes the design challenging,and the dynamic erosion behavior inside FOs is still unclear.In this paper,new FOs are proposed and the working characteristics under the influence of periodic particle-laden jets are investigated.Firstly,the results reveal the working mechanism of new FOs,showing that the generation of pressure pulses is closely connected with periodic jet switching and the development of vortices.Secondly,the important performance parameters,i.e.,pressure pulse and oscillation frequency,are extensively studied through numerical simulation and experimental verification.It is found that the performance can be optimized by adjusting the tool structure according to different engineering requirements.Finally,the oscillating solid-liquid two-phase flow inside FO is studied.It is demonstrated that the accumulation of particles leads to a significant reduction in performance.The results also reveal five locations that are susceptible to erosion and the erosion behavior of these locations are studied.It has been shown that the periodic jet causes fluctuations in the amount of erosion at the outlet and splitter.This research can provide valuable references for the design and optimization of vibration friction-reduction tools.展开更多
Enhanced gas-liquid mass transfer is significant for the desulfurization and denitration of ship exhaust gases.As a fluid device,the special structure of the fluidic oscillator generates self-excited oscillations that...Enhanced gas-liquid mass transfer is significant for the desulfurization and denitration of ship exhaust gases.As a fluid device,the special structure of the fluidic oscillator generates self-excited oscillations that can effectively enhance the mass transfer process of gas-liquid.But there are few studies on the internal gas-liquid flow.The transportation of individual bubbles in the fluidic oscillator was investigated by a high-speed camera and digital image analysis.The results show that the bubble experienced a significant deceleration process in the chamber region of the fluidic oscillator.In addition,the maximum bubble offset increased with the diameter of the initial bubble.The trajectory of the bubble showed zigzag movement due to the deflecting oscillation of the fluidic oscillator.At the same time,the deformation of the bubble was intensified by the deflecting oscillation.The deformation ratio of the bubble increased with the increase of Reynolds number.By studying the transport process of a single bubble in the fluid oscillator,it is considered that the fluid oscillator has the potential to be a new bubble generator.展开更多
The efficiency of a novel microalgal culture system (an airlift loop bioreactor [ALB] engaged with a fluidic oscillator to produce microbubbles) is compared with both a conventional ALB (producing fine bubbles without...The efficiency of a novel microalgal culture system (an airlift loop bioreactor [ALB] engaged with a fluidic oscillator to produce microbubbles) is compared with both a conventional ALB (producing fine bubbles without the fluidic oscillator) and non-aerated flask culture. The impact of CO2 mass transfer on Dunaliella salina growth is assessed, through varying the gas (5% CO2, 95% N2) dosing flow rate. The results showed that approximately 6 - 8 times higher chlorophyll content was achieved in the aerated ALB cultures than in the non-aerated flasks, and there was a 20% - 40% increase in specific growth rate of D. salina in the novel ALB with microbubbles when compared with the conventional ALB cultures. The increase in chlorophyll content was found to be proportional to the total amount of CO2 mass transfer. For the same dosing time and flow rate, higher CO2 mass transfer rate (microbubble dosing) resulted in a greater growth rate.展开更多
The fluidic oscillator is an instrument that can continuously generate a spatially sweeping jet entirely based on its internal geometry without any moving parts.However,the traditional fluidic oscillator has an inhere...The fluidic oscillator is an instrument that can continuously generate a spatially sweeping jet entirely based on its internal geometry without any moving parts.However,the traditional fluidic oscillator has an inherent limitation,that is,the spreading angle cannot be controlled independently,rather by the jet volume flow rate and internal geometry.Accordingly,two types of fluidic oscillators based on the master-slave design are developed in current study to decouple this correlation.In both designs,the master layer inherits the similar oscillation mechanisms of a sweeping jet,and the slave layer resembles a steady jet channel.The difference between the two designs is that Design A has a short diverging exit in the slave layer,but Design B adds a long interaction chamber in the exit channel to intensify flow instability.The external flow fields and governing oscillation properties of these two designs are experimentally explored with time-resolved Particle Image Velocimetry(PIV),while the internal flow dynamics and driving oscillation mechanisms are numerically investigated.By fixing the total volume flow rate,the jet spreading angle of Design A can be increased smoothly from 0°to above 100°by increasing the proportion of master layer’s flow rate from 0 to 100%.For Design B,the control authority of the master layer is significantly enhanced by adding the interaction chamber in the slave layer.In addition,the added chamber causes notable jet oscillation even when the master layer has none input.展开更多
A type of supersonic fluidic oscillator is proposed and its ability to generate pulsating supersonic jet is proved in this paper.Unsteady two-dimensional numerical simulations reveal that the fluid transforms from sub...A type of supersonic fluidic oscillator is proposed and its ability to generate pulsating supersonic jet is proved in this paper.Unsteady two-dimensional numerical simulations reveal that the fluid transforms from subsonic to supersonic condition in the mixing chamber of oscillator after the supplied flow pressure increases from 1.1×105 Pa to 5.0×105 Pa.When the supersonic flow is formed inside the oscillator,the wall-attached flow represents expansion wave and compression wave alternately.The oscillating frequency will saturate to a certain value with the increase of supplied pressure.Examination of the internal fluid dynamics indicates that the flow direction inside the FeedBack Channel(FBC)is related to the change of the local pressure at the inlet and the outlet of the feedback channel.The vortices produced in the mixing chamber present different distribution characteristics with the change of the fluid’s direction in the FBC.The sweeping jet is divided into two jets with varying flow rate over time by the splitter.In the end of two channels,two jets are accelerated above sound speed by convergent-divergent nozzle.Therefore,pulsating supersonic jets are produced at two outlets for this type of fluidic oscillator.展开更多
基金funded by the National Key Research and Development Program of China under grant number 2020YFC1807200the National Natural Science Foundation of China under grant number 41872186the National Natural Science Foundation of China(Grant number 51978674)。
文摘Fluidic oscillators(FOs)can be used as an efficient fluidic vibration tool to solve high friction problems in extended-reach wells.However,the complex mechanism of FOs makes the design challenging,and the dynamic erosion behavior inside FOs is still unclear.In this paper,new FOs are proposed and the working characteristics under the influence of periodic particle-laden jets are investigated.Firstly,the results reveal the working mechanism of new FOs,showing that the generation of pressure pulses is closely connected with periodic jet switching and the development of vortices.Secondly,the important performance parameters,i.e.,pressure pulse and oscillation frequency,are extensively studied through numerical simulation and experimental verification.It is found that the performance can be optimized by adjusting the tool structure according to different engineering requirements.Finally,the oscillating solid-liquid two-phase flow inside FO is studied.It is demonstrated that the accumulation of particles leads to a significant reduction in performance.The results also reveal five locations that are susceptible to erosion and the erosion behavior of these locations are studied.It has been shown that the periodic jet causes fluctuations in the amount of erosion at the outlet and splitter.This research can provide valuable references for the design and optimization of vibration friction-reduction tools.
基金This work was supported by the National Natural Science Foundation of China(No.22178329)the Taishan Scholars Program,the Shandong Provincial Natural Science Foundation(Nos.ZR2020ME175,ZR2020QE192)the Fundamental Research Funds for the Central Universities(No.202165002).
文摘Enhanced gas-liquid mass transfer is significant for the desulfurization and denitration of ship exhaust gases.As a fluid device,the special structure of the fluidic oscillator generates self-excited oscillations that can effectively enhance the mass transfer process of gas-liquid.But there are few studies on the internal gas-liquid flow.The transportation of individual bubbles in the fluidic oscillator was investigated by a high-speed camera and digital image analysis.The results show that the bubble experienced a significant deceleration process in the chamber region of the fluidic oscillator.In addition,the maximum bubble offset increased with the diameter of the initial bubble.The trajectory of the bubble showed zigzag movement due to the deflecting oscillation of the fluidic oscillator.At the same time,the deformation of the bubble was intensified by the deflecting oscillation.The deformation ratio of the bubble increased with the increase of Reynolds number.By studying the transport process of a single bubble in the fluid oscillator,it is considered that the fluid oscillator has the potential to be a new bubble generator.
文摘The efficiency of a novel microalgal culture system (an airlift loop bioreactor [ALB] engaged with a fluidic oscillator to produce microbubbles) is compared with both a conventional ALB (producing fine bubbles without the fluidic oscillator) and non-aerated flask culture. The impact of CO2 mass transfer on Dunaliella salina growth is assessed, through varying the gas (5% CO2, 95% N2) dosing flow rate. The results showed that approximately 6 - 8 times higher chlorophyll content was achieved in the aerated ALB cultures than in the non-aerated flasks, and there was a 20% - 40% increase in specific growth rate of D. salina in the novel ALB with microbubbles when compared with the conventional ALB cultures. The increase in chlorophyll content was found to be proportional to the total amount of CO2 mass transfer. For the same dosing time and flow rate, higher CO2 mass transfer rate (microbubble dosing) resulted in a greater growth rate.
基金financial support from the National Natural Science Foundation of China(Nos.12072196 and 11702172)Science and Technology Commission of Shanghai Municipality(No.19JC1412900)+1 种基金Aeronautics Power Foundation(No.6141B09050393)Key Laboratory of Aerodynamic Noise Control(No.ANCL20190106)extended to this study。
文摘The fluidic oscillator is an instrument that can continuously generate a spatially sweeping jet entirely based on its internal geometry without any moving parts.However,the traditional fluidic oscillator has an inherent limitation,that is,the spreading angle cannot be controlled independently,rather by the jet volume flow rate and internal geometry.Accordingly,two types of fluidic oscillators based on the master-slave design are developed in current study to decouple this correlation.In both designs,the master layer inherits the similar oscillation mechanisms of a sweeping jet,and the slave layer resembles a steady jet channel.The difference between the two designs is that Design A has a short diverging exit in the slave layer,but Design B adds a long interaction chamber in the exit channel to intensify flow instability.The external flow fields and governing oscillation properties of these two designs are experimentally explored with time-resolved Particle Image Velocimetry(PIV),while the internal flow dynamics and driving oscillation mechanisms are numerically investigated.By fixing the total volume flow rate,the jet spreading angle of Design A can be increased smoothly from 0°to above 100°by increasing the proportion of master layer’s flow rate from 0 to 100%.For Design B,the control authority of the master layer is significantly enhanced by adding the interaction chamber in the slave layer.In addition,the added chamber causes notable jet oscillation even when the master layer has none input.
基金supported by the National Science and Technology Major Project(No.2017-III-0011-0037)。
文摘A type of supersonic fluidic oscillator is proposed and its ability to generate pulsating supersonic jet is proved in this paper.Unsteady two-dimensional numerical simulations reveal that the fluid transforms from subsonic to supersonic condition in the mixing chamber of oscillator after the supplied flow pressure increases from 1.1×105 Pa to 5.0×105 Pa.When the supersonic flow is formed inside the oscillator,the wall-attached flow represents expansion wave and compression wave alternately.The oscillating frequency will saturate to a certain value with the increase of supplied pressure.Examination of the internal fluid dynamics indicates that the flow direction inside the FeedBack Channel(FBC)is related to the change of the local pressure at the inlet and the outlet of the feedback channel.The vortices produced in the mixing chamber present different distribution characteristics with the change of the fluid’s direction in the FBC.The sweeping jet is divided into two jets with varying flow rate over time by the splitter.In the end of two channels,two jets are accelerated above sound speed by convergent-divergent nozzle.Therefore,pulsating supersonic jets are produced at two outlets for this type of fluidic oscillator.
