Grinding and flotation processes are often studied independently, despite the well-established grinding influence on flotation performance, which affects not only particle size and thus liberation but also shape and l...Grinding and flotation processes are often studied independently, despite the well-established grinding influence on flotation performance, which affects not only particle size and thus liberation but also shape and leads to complex changes in pulp chemistry affecting the particle surface properties relevant for selective bubble attachment. Yet, no study jointly investigated these possible causes and many are limited to single mineral flotation. We relate grinding conditions to changes in pulp chemistry and particle surface properties and assess their impact on upgrading. We studied three non-sulfide ores with different feed grades and valuables: scheelite, apatite, and fluorite. These were dry-, wet-, and wet conditionedground before flotation in a laboratory mechanical cell. Results were evaluated with bulk-and particle-specific methodologies. The selectivity of the process is higher after dry grinding for the fluorite and apatite ores and irrelevant for the scheelite ore. Variations in flotation kinetics of individual particles associated to their size and shape are not sufficient to explain these results. The higher concentration of Ca2+and Mg2+observed in the pulp after wet grinding, altering particle surface properties, better explains the phenomenon. Additionally, we demonstrate how particle shape impacts are system specific and related to both entrainment and true flotation.展开更多
Nanobubbles play a potential role in the application of the flotation of fine particles.In this work,the identification of nanoentities was performed with a contact mode atomic force microscope(AFM).Moreover,the influ...Nanobubbles play a potential role in the application of the flotation of fine particles.In this work,the identification of nanoentities was performed with a contact mode atomic force microscope(AFM).Moreover,the influences of setpoint ratio and amplitude of the cantilever and the responses of the formed surface nanobubbles to the fluctuation of pH,salt concentration,and surfactant concentration in the slurry were respectively studied.Nanobubbles were reported on the highly oriented pyrolytic graphite(HOPG)surface as the HOPG was immersed in de-ionized water under ambient temperature.The coalescence of nanobubbles occurred under contact mode,which provides strong evidence of the gaseous nature of these nanostructures on HOPG.The measuring height of the surface nanobubbles decreased with the setpoint ratio.The changes in the pH and concentration of methyl isobutyl carbinol(MIBC)show a negligible influence on the lateral size and height of the preex-isting surface nanobubbles.The addition of LiCl results in a negligible change of the lateral size;however,an obvious change is noticed in the height of surface nanobubbles.The results are expected to provide a valuable reference in understanding the properties of surface nanobubbles and in the design of nanobubble-assisted flotation processes.展开更多
基金The Zeitenwende project, financed by the Helmholtz Association, is responsible for funding the work of some of the authors in this study。
文摘Grinding and flotation processes are often studied independently, despite the well-established grinding influence on flotation performance, which affects not only particle size and thus liberation but also shape and leads to complex changes in pulp chemistry affecting the particle surface properties relevant for selective bubble attachment. Yet, no study jointly investigated these possible causes and many are limited to single mineral flotation. We relate grinding conditions to changes in pulp chemistry and particle surface properties and assess their impact on upgrading. We studied three non-sulfide ores with different feed grades and valuables: scheelite, apatite, and fluorite. These were dry-, wet-, and wet conditionedground before flotation in a laboratory mechanical cell. Results were evaluated with bulk-and particle-specific methodologies. The selectivity of the process is higher after dry grinding for the fluorite and apatite ores and irrelevant for the scheelite ore. Variations in flotation kinetics of individual particles associated to their size and shape are not sufficient to explain these results. The higher concentration of Ca2+and Mg2+observed in the pulp after wet grinding, altering particle surface properties, better explains the phenomenon. Additionally, we demonstrate how particle shape impacts are system specific and related to both entrainment and true flotation.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51722405 and 51974310).
文摘Nanobubbles play a potential role in the application of the flotation of fine particles.In this work,the identification of nanoentities was performed with a contact mode atomic force microscope(AFM).Moreover,the influences of setpoint ratio and amplitude of the cantilever and the responses of the formed surface nanobubbles to the fluctuation of pH,salt concentration,and surfactant concentration in the slurry were respectively studied.Nanobubbles were reported on the highly oriented pyrolytic graphite(HOPG)surface as the HOPG was immersed in de-ionized water under ambient temperature.The coalescence of nanobubbles occurred under contact mode,which provides strong evidence of the gaseous nature of these nanostructures on HOPG.The measuring height of the surface nanobubbles decreased with the setpoint ratio.The changes in the pH and concentration of methyl isobutyl carbinol(MIBC)show a negligible influence on the lateral size and height of the preex-isting surface nanobubbles.The addition of LiCl results in a negligible change of the lateral size;however,an obvious change is noticed in the height of surface nanobubbles.The results are expected to provide a valuable reference in understanding the properties of surface nanobubbles and in the design of nanobubble-assisted flotation processes.
