First mirror(FM)cleaning,using radio frequency(RF)plasma,has been proposed to recover FM reflectivity in nuclear fusion reactors such as the International Thermonuclear Experimental Reactor(ITER).To investigate the in...First mirror(FM)cleaning,using radio frequency(RF)plasma,has been proposed to recover FM reflectivity in nuclear fusion reactors such as the International Thermonuclear Experimental Reactor(ITER).To investigate the influence of simultaneous cleaning of two mirrors on mirror cleaning efficiency and uniformity,experiments involving single-mirror cleaning and dual-mirror cleaning were conducted using RF capacitively coupled plasma in the laboratory.For the test and simultaneous cleaning of two mirrors,the FM and second mirror(SM),both measuring 110 mm×80 mm,were placed inside the first mirror unit(FMU).They were composed of 16 mirror samples,each with a dimension of 27.5 mm×20 mm.These mirror samples consist of a titanium-zirconium-molybdenum alloy substrate,a 500 nm Mo intermediate layer and a 30 nm Al_(2)O_(3) surface coating as a proxy for Be impurities.The cleaning of a single first mirror(SFM)and the simultaneous cleaning of the FM and SM(DFM and DSM)lasted for 9 h using Ar plasma at a pressure of 1 Pa.The total reflectivity of mirror samples on the DSM did not fully recover and varied with location,with a self-bias of−140 V.With a self-bias of−300 V,the total reflectivity of mirror samples on the SFM and DFM was fully recovered.The energy dispersive spectrometer results demonstrated that the Al_(2)O_(3) coating had been completely removed from these mirror samples.However,the mass loss of each mirror sample on the SFM and DFM before and after cleaning varied depending on its location,with higher mass loss observed for mirror samples located in the corners and lower loss for those in the center.Compared with SM cleaning,the simultaneous cleaning of two mirrors reduced the difference between the highest and lowest mass loss.Furthermore,this mass loss for the mirror samples of the DFM facing the DSM was increased.This indicated that mirror samples cleaned face to face in the FMU simultaneously could influence each other,highlighting the need for special attention in future studies.展开更多
The analysis of company data useful for economic decisions,if not interpreted in an overall view of the company situation,can lead to wrong conclusions.This is the case when a company has to choose between several sal...The analysis of company data useful for economic decisions,if not interpreted in an overall view of the company situation,can lead to wrong conclusions.This is the case when a company has to choose between several sales options for one or more products in the presence of a limiting factor.The continuation of the investigation often denies the initial analysis.Not everything is as it appears,therefore,at the beginning of the deepening of the data useful for economic decisions.As it is well known,the choices of profitability concerning the planning of the sale of company products take place,at least in the majority of cases,through the determination of the contribution margin,i.e.the profitability margin connected to the individual goods/services sold by the companies(selling price net of variable costs).The contribution margin can be determined with four objectives:(1)Determination of the yield of the single product,net of variable costs only.In this case,the margin defines unitary,from net product yield to unitary contribution margin.(2)Determination of the return on total sales of an individual product,net of variable costs.In this hypothesis,reference is made to the first level(or gross)contribution margin.(3)Determination of the ability of the individual product to contribute to the coverage of fixed costs common to the company.This margin is determined net of special product variable and fixed costs.This aggregate is defined as a Level II(or semi-gross)margin.(4)Determination of the useful value in the planning choices in case of presence of scarce productive factors.In this case,it must identify the so-called unitary margin for low factor.Here we will only deal with the problem of the use of the contribution margin in the presence of rare factors.To complete the analysis,below are some very brief considerations regarding,respectively,the unitary,level I,and level II contribution margin in order to better understand where the problem of the most convenient choice of income is located in the event of the prese展开更多
To further improve the ability of pre-hospital and in-hospital collaborative treatment, strengthen emergency multidisciplinary cooperation and construct a scientific, rational and efficient emergency system, under the...To further improve the ability of pre-hospital and in-hospital collaborative treatment, strengthen emergency multidisciplinary cooperation and construct a scientific, rational and efficient emergency system, under the support of former chairman Yu Xue-zhong, Dr. Li Chun-sheng and numerous colleagues in the industry, the Emergency Medicine Society of the Chinese Medical Association appeal to us to draft Construction of Emergency and Pre-hospital Platform. Based on this background, the platform of emergency and pre-hospital first aid helps to build a 'one horizontal and one Longitudinal' treatment model, using the horizontal and longitudinal patterns to integrate emergency medical resources to satisfy the automatic information integration and intelligent analysis sharing, realizing the emergency management visualization and medical information digitization, simplifying the medical process and establishing a perfect standard for the emergent diseases, thereby ultimately achieving efficient diagnosis and scientific treatment.展开更多
Low earth orbit satellites,with unique advantages,are prosperous types of navigation augmentation satellites for the GNSS satellites constellations.The broadcast ephemeris element needs to be designed as an important ...Low earth orbit satellites,with unique advantages,are prosperous types of navigation augmentation satellites for the GNSS satellites constellations.The broadcast ephemeris element needs to be designed as an important index of the augmented LEOs.The GPS ephemerides of 16/18 elements cannot be directly applied to the LEOs because of the poor fitting accuracies in along-track positional component.Besides,the ill-conditioned problem of the normal-matrix exists in fitting algorithm due to the small eccentricity of the LEO orbits.Based on the nonsingular orbital elements,5 sets of ephemerides with element numbers from 16 to 19 were designed respectively by adding or modifying orbital elements magnifying the along-track and radial positional components.The fitting experiments based on the LEO of 300 to 1500 km altitudes show that the fitting UREs of the proposed 16/17/18/18*/19-element ephemerides are better than 10/6/4/5/2.5 cm,respectively.According to the dynamical range of the fitting elements,the interfaces were designed for the 5 sets of ephemerides.The effects of data truncation on fitting UREs are at millimeter level.The total bits are 329/343/376/379/396,respectively.29/15 bits are saved for the 16/17-element ephemerides compared with the GPS16 ephemeris,while 64/61/41 bits can be saved for the 18/18*/19-element ephemerides compared with the GPS18 elements ephemeris.展开更多
基金supported by the National Key R&D Project of China(No.2022YFE03030000)National Natural Science Foundation of China(Nos.11975269,12275306 and 12075279)+3 种基金the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2022452)the Anhui Provincial Natural Science Foundation(No.2208085J40)the CASHIPS Director’s Fund(Nos.YZJJQY202302 and BJPY2023B03)the Comprehensive Research Facility for Fusion Technology Program of China(No.2018-000052-73-01-001228).
文摘First mirror(FM)cleaning,using radio frequency(RF)plasma,has been proposed to recover FM reflectivity in nuclear fusion reactors such as the International Thermonuclear Experimental Reactor(ITER).To investigate the influence of simultaneous cleaning of two mirrors on mirror cleaning efficiency and uniformity,experiments involving single-mirror cleaning and dual-mirror cleaning were conducted using RF capacitively coupled plasma in the laboratory.For the test and simultaneous cleaning of two mirrors,the FM and second mirror(SM),both measuring 110 mm×80 mm,were placed inside the first mirror unit(FMU).They were composed of 16 mirror samples,each with a dimension of 27.5 mm×20 mm.These mirror samples consist of a titanium-zirconium-molybdenum alloy substrate,a 500 nm Mo intermediate layer and a 30 nm Al_(2)O_(3) surface coating as a proxy for Be impurities.The cleaning of a single first mirror(SFM)and the simultaneous cleaning of the FM and SM(DFM and DSM)lasted for 9 h using Ar plasma at a pressure of 1 Pa.The total reflectivity of mirror samples on the DSM did not fully recover and varied with location,with a self-bias of−140 V.With a self-bias of−300 V,the total reflectivity of mirror samples on the SFM and DFM was fully recovered.The energy dispersive spectrometer results demonstrated that the Al_(2)O_(3) coating had been completely removed from these mirror samples.However,the mass loss of each mirror sample on the SFM and DFM before and after cleaning varied depending on its location,with higher mass loss observed for mirror samples located in the corners and lower loss for those in the center.Compared with SM cleaning,the simultaneous cleaning of two mirrors reduced the difference between the highest and lowest mass loss.Furthermore,this mass loss for the mirror samples of the DFM facing the DSM was increased.This indicated that mirror samples cleaned face to face in the FMU simultaneously could influence each other,highlighting the need for special attention in future studies.
文摘The analysis of company data useful for economic decisions,if not interpreted in an overall view of the company situation,can lead to wrong conclusions.This is the case when a company has to choose between several sales options for one or more products in the presence of a limiting factor.The continuation of the investigation often denies the initial analysis.Not everything is as it appears,therefore,at the beginning of the deepening of the data useful for economic decisions.As it is well known,the choices of profitability concerning the planning of the sale of company products take place,at least in the majority of cases,through the determination of the contribution margin,i.e.the profitability margin connected to the individual goods/services sold by the companies(selling price net of variable costs).The contribution margin can be determined with four objectives:(1)Determination of the yield of the single product,net of variable costs only.In this case,the margin defines unitary,from net product yield to unitary contribution margin.(2)Determination of the return on total sales of an individual product,net of variable costs.In this hypothesis,reference is made to the first level(or gross)contribution margin.(3)Determination of the ability of the individual product to contribute to the coverage of fixed costs common to the company.This margin is determined net of special product variable and fixed costs.This aggregate is defined as a Level II(or semi-gross)margin.(4)Determination of the useful value in the planning choices in case of presence of scarce productive factors.In this case,it must identify the so-called unitary margin for low factor.Here we will only deal with the problem of the use of the contribution margin in the presence of rare factors.To complete the analysis,below are some very brief considerations regarding,respectively,the unitary,level I,and level II contribution margin in order to better understand where the problem of the most convenient choice of income is located in the event of the prese
文摘To further improve the ability of pre-hospital and in-hospital collaborative treatment, strengthen emergency multidisciplinary cooperation and construct a scientific, rational and efficient emergency system, under the support of former chairman Yu Xue-zhong, Dr. Li Chun-sheng and numerous colleagues in the industry, the Emergency Medicine Society of the Chinese Medical Association appeal to us to draft Construction of Emergency and Pre-hospital Platform. Based on this background, the platform of emergency and pre-hospital first aid helps to build a 'one horizontal and one Longitudinal' treatment model, using the horizontal and longitudinal patterns to integrate emergency medical resources to satisfy the automatic information integration and intelligent analysis sharing, realizing the emergency management visualization and medical information digitization, simplifying the medical process and establishing a perfect standard for the emergent diseases, thereby ultimately achieving efficient diagnosis and scientific treatment.
文摘Low earth orbit satellites,with unique advantages,are prosperous types of navigation augmentation satellites for the GNSS satellites constellations.The broadcast ephemeris element needs to be designed as an important index of the augmented LEOs.The GPS ephemerides of 16/18 elements cannot be directly applied to the LEOs because of the poor fitting accuracies in along-track positional component.Besides,the ill-conditioned problem of the normal-matrix exists in fitting algorithm due to the small eccentricity of the LEO orbits.Based on the nonsingular orbital elements,5 sets of ephemerides with element numbers from 16 to 19 were designed respectively by adding or modifying orbital elements magnifying the along-track and radial positional components.The fitting experiments based on the LEO of 300 to 1500 km altitudes show that the fitting UREs of the proposed 16/17/18/18*/19-element ephemerides are better than 10/6/4/5/2.5 cm,respectively.According to the dynamical range of the fitting elements,the interfaces were designed for the 5 sets of ephemerides.The effects of data truncation on fitting UREs are at millimeter level.The total bits are 329/343/376/379/396,respectively.29/15 bits are saved for the 16/17-element ephemerides compared with the GPS16 ephemeris,while 64/61/41 bits can be saved for the 18/18*/19-element ephemerides compared with the GPS18 elements ephemeris.
