To improve mining production capacity, a stage subsequent filling mining(SSFM) method is employed for Sijiaying iron mine. The height of the stage stope is approximately 100 m. As there are farmlands and villages on t...To improve mining production capacity, a stage subsequent filling mining(SSFM) method is employed for Sijiaying iron mine. The height of the stage stope is approximately 100 m. As there are farmlands and villages on the surface of the mine, the surface deformation should be controlled when the ore is mined out for the purpose of stope stability and minimizing surface subsidence. In this paper, according to the site-specificgeological conditions, the self-stability of the stagefi lling body was analyzed, and the failure mechanism of back filling body was defined. Thus the relationship between the exposed height of filling body and the required strength was obtained. Next, the stability of back filling body and the characteristics of surface subsidence due to mining of 450 m level were analyzed using physical modeling.Finally, a three-dimensional numerical model was established using FLAC3 D, with which the surface subsidence and the stability of stope were achieved. The results show that the stope basically remains stable during the two-step recovery process. The maximum magnitude of the incline is 10.99 mm/m, a little larger than the permissible value of 10 mm/m, and the horizontal deformation is 5.9 mm/m,approaching the critical value of 6.0 mm/m, suggesting that the mine design is feasible for safety mining.展开更多
Xinli district of Sanshandao Gold Mine is the first subsea metal mine in China.To achieve 6 kt/d production capacity under the premise of safe mining,high-intensity mining might destroy the in-situ stress filed and th...Xinli district of Sanshandao Gold Mine is the first subsea metal mine in China.To achieve 6 kt/d production capacity under the premise of safe mining,high-intensity mining might destroy the in-situ stress filed and the stability of rockmass.According to sampling and testing of ore-rock and backfill and in-situ stress field measurement,safety factor method calculation model based on stress-strain strength reduction at arbitrary points and Mohr-Coulomb yield criterion was established and limit displacement subsidence values under the safety factor of different limit stoping steps were calculated.The results from three years in-situ mining and strata movement monitoring using multi-point displacements meter showed that the lower settlement frame stope hierarchical level filling mining method,mining sequence are reasonable and rockmass stability evaluation using safety factor method,in-situ real-time monitoring can provide the technical foundation for the safety of seabed mining.展开更多
基金support by the National Basic Research Program of China (973 Program) (Grant No.2010CB731500)
文摘To improve mining production capacity, a stage subsequent filling mining(SSFM) method is employed for Sijiaying iron mine. The height of the stage stope is approximately 100 m. As there are farmlands and villages on the surface of the mine, the surface deformation should be controlled when the ore is mined out for the purpose of stope stability and minimizing surface subsidence. In this paper, according to the site-specificgeological conditions, the self-stability of the stagefi lling body was analyzed, and the failure mechanism of back filling body was defined. Thus the relationship between the exposed height of filling body and the required strength was obtained. Next, the stability of back filling body and the characteristics of surface subsidence due to mining of 450 m level were analyzed using physical modeling.Finally, a three-dimensional numerical model was established using FLAC3 D, with which the surface subsidence and the stability of stope were achieved. The results show that the stope basically remains stable during the two-step recovery process. The maximum magnitude of the incline is 10.99 mm/m, a little larger than the permissible value of 10 mm/m, and the horizontal deformation is 5.9 mm/m,approaching the critical value of 6.0 mm/m, suggesting that the mine design is feasible for safety mining.
基金Project(10872218) supported by the National Natural Science Foundation of ChinaProject(2010CB732004) supported by the National Key Basic Research Program of China+1 种基金Project(20090461022) supported by the National Postdoctoral Foundation of ChinaProject (11MX21) supported by the Students' Innovation Project Aubsidize Award of Arcelor Mittal
文摘Xinli district of Sanshandao Gold Mine is the first subsea metal mine in China.To achieve 6 kt/d production capacity under the premise of safe mining,high-intensity mining might destroy the in-situ stress filed and the stability of rockmass.According to sampling and testing of ore-rock and backfill and in-situ stress field measurement,safety factor method calculation model based on stress-strain strength reduction at arbitrary points and Mohr-Coulomb yield criterion was established and limit displacement subsidence values under the safety factor of different limit stoping steps were calculated.The results from three years in-situ mining and strata movement monitoring using multi-point displacements meter showed that the lower settlement frame stope hierarchical level filling mining method,mining sequence are reasonable and rockmass stability evaluation using safety factor method,in-situ real-time monitoring can provide the technical foundation for the safety of seabed mining.
