Previous studies have shown that the fatigue life distribution of metal materials fabricated with Additive Manufacturing(AM) methods, such as Direct Energy Deposited(DED) Ti-6.5Al-2Zr-1Mo-1V alloys, exhibits two peaks...Previous studies have shown that the fatigue life distribution of metal materials fabricated with Additive Manufacturing(AM) methods, such as Direct Energy Deposited(DED) Ti-6.5Al-2Zr-1Mo-1V alloys, exhibits two peaks. To promote the application of AM in aerospace and other engineering fields, developing a fatigue strength evaluation method suitable for AM materials based on their unique fatigue behaviours and fatigue life distributions is necessary. In this paper, a novel Detail Fatigue Rating(DFR) method was developed to evaluate the fatigue strength of DED Ti-6.5Al-2Zr-1Mo-1V based on a bimodal Weibull distribution and the excessive restriction on the allowable stress of potential was improved. Meanwhile, a Bimodal Weibull distribution model for fatigue life and its parameter estimation method were established based on a twoparameter Weibull distribution. The fatigue life at a specific reliability level and confidence level was calculated by using the bootstrap method. The calculation results showed that fatigue life estimated by using the bimodal Weibull distribution at the high reliability level and high confidence level is higher than that estimated by using the two-parameter Weibull distribution. Furthermore,The S-N curve at the specified confidence level and reliability level was fitted.展开更多
A two-dimensional self-consistent kinetic model was developed to study the influence of the various factors on the electron energy distribution function. These factors include gas pressure the driving frequency, the ...A two-dimensional self-consistent kinetic model was developed to study the influence of the various factors on the electron energy distribution function. These factors include gas pressure the driving frequency, the radius and length of the inductively coupled plasma equipment, the amplitude of the radio-frequency coil current, and the number of turns of rf coils. The spatial profiles of the rf electric field and power density have also been calculated under the same parameters. Numerical results show that the electron energy distribution functions are significantly modified and the spatial profiles of the rf electric field and rf power density are also demonstrated.展开更多
Nowadays high intensity proton accelerators are extensively applied, and this paper gives particular emphasis on CYCIAE-100, a 100 MeV high intensity compact cyclotron being constructed at CIAE. For accelerators of th...Nowadays high intensity proton accelerators are extensively applied, and this paper gives particular emphasis on CYCIAE-100, a 100 MeV high intensity compact cyclotron being constructed at CIAE. For accelerators of this type, the study is focused on how to improve the beam intensity. As for CYCIAE-100, the charge-exchange extraction is used to get protons. So it is crucial to enhance the lifetime of the stripping foil, which is largely determined by the energy deposition on it. For this cyclotron, due to the influence of the magnetic field, the electrons will spin near the foil and lose energy each time when they cross the foil. The energy deposition refers to all the energy deposition of protons and electrons. This paper stresses the stripper study of CYCIAE-100, in which the particle distribution on the foil is simulated and the energy deposition of the protons and electrons stripped from the H- ions are calculated. The temperature distributions are then calculated as a main reference for the foil design.展开更多
In this paper, we simulate γ -ray energy deposition for different incident energies with four different mod-els using the tool GEANT4(Geant4.7.0, 2005)developed by CERN (the Center of European Research of Nucleus). T...In this paper, we simulate γ -ray energy deposition for different incident energies with four different mod-els using the tool GEANT4(Geant4.7.0, 2005)developed by CERN (the Center of European Research of Nucleus). The results we obtained indicate that there are different peak values for different incident energies. That is, we can differentiate the incident energy accurately if the detector can determine the peak value accurately. This is meaningful for the geometrical configuration of the detector to get the most probable distribution (MPD) of energy deposition for different incident energies. According to the simulation, we can insert certain slices with large absorption coefficient to obtain a better MPD of energy deposition which will not alter the shape of the energy deposition.展开更多
基金the support from the National Key Research and Development Program of China(No.2017YFB1104003)National Natural Science Foundation of China(No.11772027)Aeronautical Science Foundation of China(No.201909051002)。
文摘Previous studies have shown that the fatigue life distribution of metal materials fabricated with Additive Manufacturing(AM) methods, such as Direct Energy Deposited(DED) Ti-6.5Al-2Zr-1Mo-1V alloys, exhibits two peaks. To promote the application of AM in aerospace and other engineering fields, developing a fatigue strength evaluation method suitable for AM materials based on their unique fatigue behaviours and fatigue life distributions is necessary. In this paper, a novel Detail Fatigue Rating(DFR) method was developed to evaluate the fatigue strength of DED Ti-6.5Al-2Zr-1Mo-1V based on a bimodal Weibull distribution and the excessive restriction on the allowable stress of potential was improved. Meanwhile, a Bimodal Weibull distribution model for fatigue life and its parameter estimation method were established based on a twoparameter Weibull distribution. The fatigue life at a specific reliability level and confidence level was calculated by using the bootstrap method. The calculation results showed that fatigue life estimated by using the bimodal Weibull distribution at the high reliability level and high confidence level is higher than that estimated by using the two-parameter Weibull distribution. Furthermore,The S-N curve at the specified confidence level and reliability level was fitted.
基金the National Science Foundation of China(Nos.10376003,10572035)
文摘A two-dimensional self-consistent kinetic model was developed to study the influence of the various factors on the electron energy distribution function. These factors include gas pressure the driving frequency, the radius and length of the inductively coupled plasma equipment, the amplitude of the radio-frequency coil current, and the number of turns of rf coils. The spatial profiles of the rf electric field and power density have also been calculated under the same parameters. Numerical results show that the electron energy distribution functions are significantly modified and the spatial profiles of the rf electric field and rf power density are also demonstrated.
文摘Nowadays high intensity proton accelerators are extensively applied, and this paper gives particular emphasis on CYCIAE-100, a 100 MeV high intensity compact cyclotron being constructed at CIAE. For accelerators of this type, the study is focused on how to improve the beam intensity. As for CYCIAE-100, the charge-exchange extraction is used to get protons. So it is crucial to enhance the lifetime of the stripping foil, which is largely determined by the energy deposition on it. For this cyclotron, due to the influence of the magnetic field, the electrons will spin near the foil and lose energy each time when they cross the foil. The energy deposition refers to all the energy deposition of protons and electrons. This paper stresses the stripper study of CYCIAE-100, in which the particle distribution on the foil is simulated and the energy deposition of the protons and electrons stripped from the H- ions are calculated. The temperature distributions are then calculated as a main reference for the foil design.
文摘In this paper, we simulate γ -ray energy deposition for different incident energies with four different mod-els using the tool GEANT4(Geant4.7.0, 2005)developed by CERN (the Center of European Research of Nucleus). The results we obtained indicate that there are different peak values for different incident energies. That is, we can differentiate the incident energy accurately if the detector can determine the peak value accurately. This is meaningful for the geometrical configuration of the detector to get the most probable distribution (MPD) of energy deposition for different incident energies. According to the simulation, we can insert certain slices with large absorption coefficient to obtain a better MPD of energy deposition which will not alter the shape of the energy deposition.
