It is of great significance for safety reason to obtain the triaxial compressive properties of cemented tailings backfill(CTB).The influence of cement content,curing age and confining pressure on strength and deformat...It is of great significance for safety reason to obtain the triaxial compressive properties of cemented tailings backfill(CTB).The influence of cement content,curing age and confining pressure on strength and deformation properties of CTB was examined and discussed.Results indicate that the triaxial compressive and deformation behavior of CTB is strongly affected by the cement content,curing age and confining pressure.The increase in cement content,curing age and confining pressure leads to a change in stress−strain behavior and an increase in the axial strain at failure and post-peak strength loss.The cohesion of CTB rises as the curing age and cement content increase.However,the enhancement in internal friction angle is trivial and negligible.It should be noted that the failure pattern of CTB samples in triaxial compression is mainly along a shear plane,the confining pressure restrains the lateral expansion and the bulging failure pattern is dominantly detected in CTB samples as curing age length and cement content increase.The results will help to better understand the triaxial mechanical and deformation behavior of CTB.展开更多
The deep surrounding rock is usually in the true triaxial stress state,and previous constitutive models based on the understanding of uniaxial and conventional triaxial test results have difficulty characterizing the ...The deep surrounding rock is usually in the true triaxial stress state,and previous constitutive models based on the understanding of uniaxial and conventional triaxial test results have difficulty characterizing the degradation and fracture process of rock ductile–brittle failure under true triaxial stress state.Therefore,this study conducted a series of true triaxial tests to obtain the understanding of the ductile–brittle behaviour of rock,and then combined the test results and the Mogi–Coulomb strength criterion,and proposed calculation methods for the elastic modulus E,cohesion c and internal friction angle u and the evolution functions of E,c and u of rock under true triaxial stresses.With the decreasing of the minimum principal stress r3 or increasing of the intermediate principal stress r2,the marble post-peak stress drop rate gradually increases,the ductility gradually weakens,and the brittleness significantly strengthens.The calculation method and evolution function of rock E,c and u under true triaxial stress were proposed.E decreased at first and then tended to remain stable with the increasing of equivalent plastic strain increment dep.c and u slowly increased at first and then rapidly decreased.With a method of parameter degradation rate to realize post-peak stress drop rate to reflect the ductile–brittle characteristics,a new three-dimensional ductile–brittle deterioration mechanical model(3DBDM)was established.The proposed model can accurately characterize the influence of r2 and r3 on mechanical parameters,the ductile–brittle behaviour of rock under true triaxial stresses,and the asymmetric failure characteristics of surrounding rock after excavation of deep underground engineering.The proposed model can be reduced to elastic–perfectly plastic,elastic–brittle,cohesion weakening friction strengthening(CWFS),Mohr–Coulomb,and Drucker–Prager models.展开更多
Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock und...Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock under different stress paths,a new cyclic loading and unloading test method for controlled true triaxial loading and unloading and principal stress direction interchange was proposed,and the evolution of mechanical parameters of Shuangjiangkou granite under different stress paths was studied,including the deformation modulus,elastic deformation increment ratios,fracture degree,cohesion and internal friction angle.Additionally,stress path coefficient was defined to characterize different stress paths,and the functional relationships among the stress path coefficient,rock fracture degree difference coefficient,cohesion and internal friction angle were obtained.The results show that during the true triaxial cyclic loading and unloading process,the deformation modulus and cohesion gradually decrease,while the internal friction angle gradually increases with increasing equivalent crack strain.The stress path coefficient is exponentially related to the rock fracture degree difference coefficient.As the stress path coefficient increases,the degrees of cohesion weakening and internal friction angle strengthening decrease linearly.During cyclic loading and unloading under true triaxial principal stress direction interchange,the direction of crack development changes,and the deformation modulus increases,while the cohesion and internal friction angle decrease slightly,indicating that the principal stress direction interchange has a strengthening effect on the surrounding rocks.Finally,the influences of the principal stress interchange direction on the stabilities of deep engineering excavation projects are discussed.展开更多
Mechanical properties of methane hydrate- bearing-sediments （MHBS） are basic parameters for safety analysis of hydrate exploration and exploitation. Young＇s modulus, cohesion, and internal friction angle of hydrate...Mechanical properties of methane hydrate- bearing-sediments （MHBS） are basic parameters for safety analysis of hydrate exploration and exploitation. Young＇s modulus, cohesion, and internal friction angle of hydrate- bearing sediments synthesized in laboratory, are investigated using tri-axial tests. Stress-strain curves and strength parameters are obtained and discussed for different compositions and different hydrate saturation, followed by empirical expressions related to the cohesion, internal friction angle, and modulus of MHBS. Almost all tested MHBS samples exhibit plastic failure. With the increase of total saturation of ice and methane hydrate （MH）, the specimens＇ internal friction angle decreases while the cohesion increases.展开更多
通过三轴固结排水试验,研究掺砂量对水泥砂浆桩邓肯-张模型参数的影响。研究结果表明:水泥砂浆桩应力应变曲线呈双曲线型,计算获得邓肯-张模型8大参数初始弹性模量和初始泊松比。淤泥质土中水泥掺入比为17.1%时,掺砂量从30%增加到50%,...通过三轴固结排水试验,研究掺砂量对水泥砂浆桩邓肯-张模型参数的影响。研究结果表明:水泥砂浆桩应力应变曲线呈双曲线型,计算获得邓肯-张模型8大参数初始弹性模量和初始泊松比。淤泥质土中水泥掺入比为17.1%时,掺砂量从30%增加到50%,水泥砂浆桩内摩擦角从34.6°增加到36.1°,而黏聚力则从46.8 k Pa降低到28.8 k Pa,初始弹性模量在10.0~65.0 MPa之间,初始泊松比在0.2~0.35之间。掺入水泥使淤泥质土由塑性破坏转为脆性破坏,随着掺砂量的增大,试样的脆性进一步增强。展开更多
基金Projects(2018YFC0808403,2018YFE0123000)supported by the National Key Technologies Research&Development Program of ChinaProject(800015Z1185)supported by the Yueqi Young Scholar Project,ChinaProject(2020YJSNY04)supported by the Fundamental Research Funds for the Central Universities,China。
文摘It is of great significance for safety reason to obtain the triaxial compressive properties of cemented tailings backfill(CTB).The influence of cement content,curing age and confining pressure on strength and deformation properties of CTB was examined and discussed.Results indicate that the triaxial compressive and deformation behavior of CTB is strongly affected by the cement content,curing age and confining pressure.The increase in cement content,curing age and confining pressure leads to a change in stress−strain behavior and an increase in the axial strain at failure and post-peak strength loss.The cohesion of CTB rises as the curing age and cement content increase.However,the enhancement in internal friction angle is trivial and negligible.It should be noted that the failure pattern of CTB samples in triaxial compression is mainly along a shear plane,the confining pressure restrains the lateral expansion and the bulging failure pattern is dominantly detected in CTB samples as curing age length and cement content increase.The results will help to better understand the triaxial mechanical and deformation behavior of CTB.
基金financial support received from the National Natural Science Foundation of China(Grant No.52109119)the Changjiang River Scientific Research Institute Open Research Program(Grant No.CKWV20221014/KY)+3 种基金the Guangxi Natural Science Foundation(Grant No.2021GXNSFBA075030)the Open Research Fund of State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin(China Institute of Water Resources and Hydropower Research)(Grant No.IWHR-SKL-202202)the Guangxi Science and Technology Project(Grant No.GuikeAD20325002)the Systematic Project of Guangxi Key Laboratory of Disaster Prevention and Engineering Safety(Grant No.2020ZDK007)。
文摘The deep surrounding rock is usually in the true triaxial stress state,and previous constitutive models based on the understanding of uniaxial and conventional triaxial test results have difficulty characterizing the degradation and fracture process of rock ductile–brittle failure under true triaxial stress state.Therefore,this study conducted a series of true triaxial tests to obtain the understanding of the ductile–brittle behaviour of rock,and then combined the test results and the Mogi–Coulomb strength criterion,and proposed calculation methods for the elastic modulus E,cohesion c and internal friction angle u and the evolution functions of E,c and u of rock under true triaxial stresses.With the decreasing of the minimum principal stress r3 or increasing of the intermediate principal stress r2,the marble post-peak stress drop rate gradually increases,the ductility gradually weakens,and the brittleness significantly strengthens.The calculation method and evolution function of rock E,c and u under true triaxial stress were proposed.E decreased at first and then tended to remain stable with the increasing of equivalent plastic strain increment dep.c and u slowly increased at first and then rapidly decreased.With a method of parameter degradation rate to realize post-peak stress drop rate to reflect the ductile–brittle characteristics,a new three-dimensional ductile–brittle deterioration mechanical model(3DBDM)was established.The proposed model can accurately characterize the influence of r2 and r3 on mechanical parameters,the ductile–brittle behaviour of rock under true triaxial stresses,and the asymmetric failure characteristics of surrounding rock after excavation of deep underground engineering.The proposed model can be reduced to elastic–perfectly plastic,elastic–brittle,cohesion weakening friction strengthening(CWFS),Mohr–Coulomb,and Drucker–Prager models.
基金the financial support from the National Natural Science Foundation of China(Grant Nos.51839003 and 42207221).
文摘Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock under different stress paths,a new cyclic loading and unloading test method for controlled true triaxial loading and unloading and principal stress direction interchange was proposed,and the evolution of mechanical parameters of Shuangjiangkou granite under different stress paths was studied,including the deformation modulus,elastic deformation increment ratios,fracture degree,cohesion and internal friction angle.Additionally,stress path coefficient was defined to characterize different stress paths,and the functional relationships among the stress path coefficient,rock fracture degree difference coefficient,cohesion and internal friction angle were obtained.The results show that during the true triaxial cyclic loading and unloading process,the deformation modulus and cohesion gradually decrease,while the internal friction angle gradually increases with increasing equivalent crack strain.The stress path coefficient is exponentially related to the rock fracture degree difference coefficient.As the stress path coefficient increases,the degrees of cohesion weakening and internal friction angle strengthening decrease linearly.During cyclic loading and unloading under true triaxial principal stress direction interchange,the direction of crack development changes,and the deformation modulus increases,while the cohesion and internal friction angle decrease slightly,indicating that the principal stress direction interchange has a strengthening effect on the surrounding rocks.Finally,the influences of the principal stress interchange direction on the stabilities of deep engineering excavation projects are discussed.
基金supported by the National Natural Science Foundation of China (11102209 and 11072245)the National High Technology Research and Development Program of China (863)the Key Program of Chinese Academy of Sciences (KJCX2-YW-L02)
文摘Mechanical properties of methane hydrate- bearing-sediments （MHBS） are basic parameters for safety analysis of hydrate exploration and exploitation. Young＇s modulus, cohesion, and internal friction angle of hydrate- bearing sediments synthesized in laboratory, are investigated using tri-axial tests. Stress-strain curves and strength parameters are obtained and discussed for different compositions and different hydrate saturation, followed by empirical expressions related to the cohesion, internal friction angle, and modulus of MHBS. Almost all tested MHBS samples exhibit plastic failure. With the increase of total saturation of ice and methane hydrate （MH）, the specimens＇ internal friction angle decreases while the cohesion increases.
文摘通过三轴固结排水试验,研究掺砂量对水泥砂浆桩邓肯-张模型参数的影响。研究结果表明:水泥砂浆桩应力应变曲线呈双曲线型,计算获得邓肯-张模型8大参数初始弹性模量和初始泊松比。淤泥质土中水泥掺入比为17.1%时,掺砂量从30%增加到50%,水泥砂浆桩内摩擦角从34.6°增加到36.1°,而黏聚力则从46.8 k Pa降低到28.8 k Pa,初始弹性模量在10.0~65.0 MPa之间,初始泊松比在0.2~0.35之间。掺入水泥使淤泥质土由塑性破坏转为脆性破坏,随着掺砂量的增大,试样的脆性进一步增强。
