A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composi- tion of 22Cr-8.0Mn-xNi-1.0Mo-0.7Cu-0.7W-0.3N （x = 0.5 -- 2.0） have been developed by examining the micro- stru...A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composi- tion of 22Cr-8.0Mn-xNi-1.0Mo-0.7Cu-0.7W-0.3N （x = 0.5 -- 2.0） have been developed by examining the micro- structure, mechanical and corrosion properties of these alloys. The results show that these alloys have a balanced ferrite-austenite relation. In addition, the alloys are free of precipitation of sigma phase and Cr-nitride when solution- treated at 750 to 1300℃ for 30 min. The yield strength, tensile strength and fracture elongation values of experi- mental alloys solution-treated at 1050 ℃ for 30 min are about 500, 750 MPa and 40.0%, respectively. Low-temper- ature impact properties can be improved distinctly with the increase of nickel content. Among the designed DSS al- loys, the alloy with Ni of 2.0% is found to be an optimum alloy with proper phase proportion, better low-tempera- ture impact properties and higher pitting corrosion resistance compared with those o~ other alloys. The mechanical and corrosion properties and lower production cost of the designed DSSs are better than those of AISI 304.展开更多
A new series of economical Mo-free duplex stainless steels 21.5Cr-3.5Ni-xW-0. 2N （x = 1.8 -- 3. 0, mass%） have been developed. The effects of W on mechanical properties and corrosion resistance were investigated, an...A new series of economical Mo-free duplex stainless steels 21.5Cr-3.5Ni-xW-0. 2N （x = 1.8 -- 3. 0, mass%） have been developed. The effects of W on mechanical properties and corrosion resistance were investigated, and the microstructures were analyzed by optical microscopy, X-ray diffraction, transmission electron microscopy and electron backscatter diffraction. The designed steels have a balanced ferrite-austenite relation and are free of sigma phase after solution treatment at 750--1 300 ~C for 30 min followed by water-quenching, whereas a small number of Cr23 C~ precipitates were found after solution treatment at 750 ~C. After solution treatment at 1050 ℃, the steel with 1.8~ （mass percent） W exhibits the highest room temperature tensile strength due to the strongest work hardening effect, while the steel with 3.0% （mass percent） W exhibits the highest fracture elongation owing to the transformation-in- duced plasticity （TRIP） effect. The ductile-brittle transition （DBT） and martensite transformation are respectively found in the ferrite and austenite, which deteriorates the impact properties of the steels with the increase of W con- tent. The corrosion resistance of the designed steels is improved with the increase of W content. The pitting resistance of austenite is obviously better than that of ferrite for the designed alloys. Among the designed steels, the steel with 1.8% （mass percent） W is found to be an optimum steel with excellent comprehensive properties and lowest production cost.展开更多
基金Sponsored by Innovation Fund of Education Commission of Shanghai Municipality of China (09yz20)
文摘A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composi- tion of 22Cr-8.0Mn-xNi-1.0Mo-0.7Cu-0.7W-0.3N （x = 0.5 -- 2.0） have been developed by examining the micro- structure, mechanical and corrosion properties of these alloys. The results show that these alloys have a balanced ferrite-austenite relation. In addition, the alloys are free of precipitation of sigma phase and Cr-nitride when solution- treated at 750 to 1300℃ for 30 min. The yield strength, tensile strength and fracture elongation values of experi- mental alloys solution-treated at 1050 ℃ for 30 min are about 500, 750 MPa and 40.0%, respectively. Low-temper- ature impact properties can be improved distinctly with the increase of nickel content. Among the designed DSS al- loys, the alloy with Ni of 2.0% is found to be an optimum alloy with proper phase proportion, better low-tempera- ture impact properties and higher pitting corrosion resistance compared with those o~ other alloys. The mechanical and corrosion properties and lower production cost of the designed DSSs are better than those of AISI 304.
基金Item Sponsored by National Key Technology Research and Development Program in 12th Five-Year Plan of China(2012BAE04B02)Innovation Fund of Education Commission of Shanghai Municipality of China(12CXY10)
文摘A new series of economical Mo-free duplex stainless steels 21.5Cr-3.5Ni-xW-0. 2N （x = 1.8 -- 3. 0, mass%） have been developed. The effects of W on mechanical properties and corrosion resistance were investigated, and the microstructures were analyzed by optical microscopy, X-ray diffraction, transmission electron microscopy and electron backscatter diffraction. The designed steels have a balanced ferrite-austenite relation and are free of sigma phase after solution treatment at 750--1 300 ~C for 30 min followed by water-quenching, whereas a small number of Cr23 C~ precipitates were found after solution treatment at 750 ~C. After solution treatment at 1050 ℃, the steel with 1.8~ （mass percent） W exhibits the highest room temperature tensile strength due to the strongest work hardening effect, while the steel with 3.0% （mass percent） W exhibits the highest fracture elongation owing to the transformation-in- duced plasticity （TRIP） effect. The ductile-brittle transition （DBT） and martensite transformation are respectively found in the ferrite and austenite, which deteriorates the impact properties of the steels with the increase of W con- tent. The corrosion resistance of the designed steels is improved with the increase of W content. The pitting resistance of austenite is obviously better than that of ferrite for the designed alloys. Among the designed steels, the steel with 1.8% （mass percent） W is found to be an optimum steel with excellent comprehensive properties and lowest production cost.
