Lithium(Li)-O_(2)batteries have triggered worldwide interest due to their ultrahigh theoretical energy density.However,it is a long shot for the grand-scale applications of Li-O_(2)battery at current stage owing to it...Lithium(Li)-O_(2)batteries have triggered worldwide interest due to their ultrahigh theoretical energy density.However,it is a long shot for the grand-scale applications of Li-O_(2)battery at current stage owing to its significant polarization,inferior cycling life,and irreversible decomposition of Li2O_(2).Herein,a facile way of preparing the highly dispersed Co-based nanoparticles encapsulated into porous N-doping carbon polyhedral with the low content of Ru modification(LRu@HDCo-NC)is explored through the pyrolysis of Co/Zn based zeolitic imidazole frameworks(ZIFs)containing Ru-based ligands.Even with the very small amount of Ru introduction(1.8%),LRu@HDCo-NC still exhibits the superior oxygen evolution reaction/oxygen reduction reaction(OER/ORR)performance and also inhibits side reactions in Li-O_(2)battery because of the abundant pores,plentiful surface N heteroatoms,and highly dispersed metal-based sites which are induced by the volatilization of Zn,and conductive/stable carbon skeleton derived from ZIFs.When applied in Li-O_(2)batteries,LRu@HDCo-NC cathode delivers a high discharge capacity of 15,973 mAh·g^(-1)at 200 mA·g^(-1),good capacity retention at higher rate(12,362 mAh·g^(-1)at 500 mA·g^(-1))and outstanding stability for>300 cycles with low voltage polarization of<2.3 V under a cut-off capacity of 1,000 mAh·g^(-1)at 500 mA·g^(-1).More critically,a series of ex situ and in situ characterization technologies disclose that the LRu@HDCo-NC cathodes can effectively promote the reversible reactions in Li-O_(2)batteries.展开更多
A three-dimensional heterogeneous mass transfer model was proposed to investigate the enhancement of dispersed particles on gas absorption. The strategy to calculate local and overall enhancement factors is proposed. ...A three-dimensional heterogeneous mass transfer model was proposed to investigate the enhancement of dispersed particles on gas absorption. The strategy to calculate local and overall enhancement factors is proposed. Instead of a global grid, the composite overlapping grid is adopted, which simplifies the setup and solution of the three-dimensional model equations. It is found that dispersed particle hold-up, particle size, liquid-solid partition coefficient of transported component, characteristic contact time, and the shortest distance between particles and gas-liquid interface have major influence on absorption enhancement factor. The particle-particle interaction on gas absorption and the lateral diffusion of transported component in liquid film were studied with the multi-particle simulation. The proposed model predicted the experimental data from the literature reasonably well.展开更多
Fast ionic conductors are one kind of solid state material with ionic conductivity as high as that of melten salts or liquid electrolytes.Ionic conductivity is one of the important parameters for characterizing a fast...Fast ionic conductors are one kind of solid state material with ionic conductivity as high as that of melten salts or liquid electrolytes.Ionic conductivity is one of the important parameters for characterizing a fast ionic conductor.For a long time materialists and chemists have made great efforts in search of new fast ionic conductors with high ionic conductivity.In view of structure,they have synthesised silver and copper fast ionic conductors with so called open structures.But it is not so successful for searching more applicable alkaline fast ionic conductors.Since polymer has flexibility for making thin film,it concentrates attention on the polymer-alkaline salt complex.Fenton et al.have first reported poly(ethylene oxide) (PEO)-alkaline salt complex.Later on Armard et al.have investigated the electrical property of PEO-NaSCN.展开更多
This paper discusses the utilization of nano-sized fillers in Polyamide 6 to increase the fracture resistance of the composites, which are crucial for various engineering applications. The toughening of the composites...This paper discusses the utilization of nano-sized fillers in Polyamide 6 to increase the fracture resistance of the composites, which are crucial for various engineering applications. The toughening of the composites is achieved by using dispersed nano-scaled rubber particles (Polyether block copolymer) as the inclusion in Polyamide 6 matrix. For a better understanding of the mechanical behavior of the composites, it is indispensable to use analytical and numerical models for evaluating the overall mechanical behavior and damage mechanism of the composite. In this work the toughening mechanism is studied through literature review and by analytical modeling. The mechanical behavior of the composites such as elastic plastic and damage properties are calculated numerically with 3D representative volume element (RVE) models. The numerical results are compared with previously obtained experiments. The influence of volume fraction and aspect ratio of inclusions on the macroscopic stress strain curve as well as the size effect of inclusions and also the failure properties of the composite are studied in detail.展开更多
基金The authors acknowledge funding support from the National Natural Science Foundation of China(Nos.21905151 and 51772162)Youth Innovation and Technology Foundation of Shandong Higher Education Institutions,China(No.2019KJC004)+2 种基金Outstanding Youth Foundation of Shandong Province,China(No.ZR2019JQ14)Taishan Scholar Young Talent Program,Major Scientific and Technological Innovation Project(No.2019JZZY020405)the Postdoctoral Science Foundation of China(No.2019M652499).
文摘Lithium(Li)-O_(2)batteries have triggered worldwide interest due to their ultrahigh theoretical energy density.However,it is a long shot for the grand-scale applications of Li-O_(2)battery at current stage owing to its significant polarization,inferior cycling life,and irreversible decomposition of Li2O_(2).Herein,a facile way of preparing the highly dispersed Co-based nanoparticles encapsulated into porous N-doping carbon polyhedral with the low content of Ru modification(LRu@HDCo-NC)is explored through the pyrolysis of Co/Zn based zeolitic imidazole frameworks(ZIFs)containing Ru-based ligands.Even with the very small amount of Ru introduction(1.8%),LRu@HDCo-NC still exhibits the superior oxygen evolution reaction/oxygen reduction reaction(OER/ORR)performance and also inhibits side reactions in Li-O_(2)battery because of the abundant pores,plentiful surface N heteroatoms,and highly dispersed metal-based sites which are induced by the volatilization of Zn,and conductive/stable carbon skeleton derived from ZIFs.When applied in Li-O_(2)batteries,LRu@HDCo-NC cathode delivers a high discharge capacity of 15,973 mAh·g^(-1)at 200 mA·g^(-1),good capacity retention at higher rate(12,362 mAh·g^(-1)at 500 mA·g^(-1))and outstanding stability for>300 cycles with low voltage polarization of<2.3 V under a cut-off capacity of 1,000 mAh·g^(-1)at 500 mA·g^(-1).More critically,a series of ex situ and in situ characterization technologies disclose that the LRu@HDCo-NC cathodes can effectively promote the reversible reactions in Li-O_(2)batteries.
基金Supported by the National Natural Science Foundation of China (No. 20136010).
文摘A three-dimensional heterogeneous mass transfer model was proposed to investigate the enhancement of dispersed particles on gas absorption. The strategy to calculate local and overall enhancement factors is proposed. Instead of a global grid, the composite overlapping grid is adopted, which simplifies the setup and solution of the three-dimensional model equations. It is found that dispersed particle hold-up, particle size, liquid-solid partition coefficient of transported component, characteristic contact time, and the shortest distance between particles and gas-liquid interface have major influence on absorption enhancement factor. The particle-particle interaction on gas absorption and the lateral diffusion of transported component in liquid film were studied with the multi-particle simulation. The proposed model predicted the experimental data from the literature reasonably well.
文摘Fast ionic conductors are one kind of solid state material with ionic conductivity as high as that of melten salts or liquid electrolytes.Ionic conductivity is one of the important parameters for characterizing a fast ionic conductor.For a long time materialists and chemists have made great efforts in search of new fast ionic conductors with high ionic conductivity.In view of structure,they have synthesised silver and copper fast ionic conductors with so called open structures.But it is not so successful for searching more applicable alkaline fast ionic conductors.Since polymer has flexibility for making thin film,it concentrates attention on the polymer-alkaline salt complex.Fenton et al.have first reported poly(ethylene oxide) (PEO)-alkaline salt complex.Later on Armard et al.have investigated the electrical property of PEO-NaSCN.
文摘This paper discusses the utilization of nano-sized fillers in Polyamide 6 to increase the fracture resistance of the composites, which are crucial for various engineering applications. The toughening of the composites is achieved by using dispersed nano-scaled rubber particles (Polyether block copolymer) as the inclusion in Polyamide 6 matrix. For a better understanding of the mechanical behavior of the composites, it is indispensable to use analytical and numerical models for evaluating the overall mechanical behavior and damage mechanism of the composite. In this work the toughening mechanism is studied through literature review and by analytical modeling. The mechanical behavior of the composites such as elastic plastic and damage properties are calculated numerically with 3D representative volume element (RVE) models. The numerical results are compared with previously obtained experiments. The influence of volume fraction and aspect ratio of inclusions on the macroscopic stress strain curve as well as the size effect of inclusions and also the failure properties of the composite are studied in detail.
