The effect of a pulsed electric current on the residual stress evolution of metal materials has been investigated.It was found that the surface and internal residual stresses in the as-quenched samples were reduced dr...The effect of a pulsed electric current on the residual stress evolution of metal materials has been investigated.It was found that the surface and internal residual stresses in the as-quenched samples were reduced dramatically by electropulsing.A large number of experimental data show that the residual stress reduction is proportional to the initial residual stress and related to the material properties and electropulsing parameters.Under the combined actions of drift electrons,Joule heating,and residual stress,the dislocation mobility was enhanced,resulting in plastic strain and the decrease in residual stress.Drift electrons played a unique role in the electropulsing treatment,acting as an additional force pushing dislocations forward.The dislocations ultimately accumulated at a grain boundary,forming a parallel arrangement.Finally,the phenomenological equation of the residual stress evolution under electropulsing was derived from the experimental data.展开更多
Hydrogen embrittlement(HE)poses a significant challenge for the development of high-strength metallic materials.However,explanations for the observed HE phenomena are still under debate.To shed light on this issue,her...Hydrogen embrittlement(HE)poses a significant challenge for the development of high-strength metallic materials.However,explanations for the observed HE phenomena are still under debate.To shed light on this issue,here we investigated the hydrogen-defect interaction by comparing the dislocation structure evolution after hydrogen adsorption and desorption in a Fe-28Mn-0.3C(wt%)twinning-induced plasticity steel with an austenitic structure using in situ electron channeling contrast imaging.The results indicate that hydrogen can strongly affect dislocation activities.In detail,hydrogen can promote the formation of stacking faults with a long dissociation distance.Besides,dislocation movements are frequently observed during hydrogen desorption.The required resolved shear stress is considered to be the residual stresses rendered by hydrogen segregation.Furthermore,the microstructural heterogeneity could lead to the discrepancy of dislocation activities even within the same materials.展开更多
High- and medium-Mn (H/M-Mn) base lightweight steels are a class of ultrastrong structural materials with high ductility compared to their low-Mn counterparts with low strength and poor ductility.However, producing th...High- and medium-Mn (H/M-Mn) base lightweight steels are a class of ultrastrong structural materials with high ductility compared to their low-Mn counterparts with low strength and poor ductility.However, producing these H/M-Mn materials requires the advanced or high-tech manufacturing techniques, which can unavoidably provoke labor and cost concerns. Herein, we have developed a facilestrategy that circumvents the strength–ductility trade-off in low-Mn ferritic lightweight steels, by employing low-temperature tempering-induced partitioning (LTP). This LTP treatment affords a typical Fe-2.8Mn-5.7Al-0.3C (wt.%) steel with a heterogeneous size-distribution of metastable austenite embeddedin a ferrite matrix for partitioning more carbon into smaller austenite grains than into the larger austenite ones. This size-dependent partitioning results in slip plane spacing modification and lattice strain,which act through dislocation engineering. We ascribe the simultaneous improvement in strength andtotal elongation to both the size-dependent dislocation movement in austenite grains and the controlleddeformation-induced martensitic transformation. The low-carbon-partitioned large austenite grains increase the strength and ductility as a consequence of the combined martensitic transformation andhigh dislocation density-induced hardening and by interface strengthening. Additionally, high-carbonpartitioned small austenite grains enhance the strength and ductility by planar dislocation glide (inthe low strain regime) and by cross-slipping and delayed martensitic transformation (in the high strainregime). The concept of size-dependent dislocation engineering may provide different pathways for developing a wide range of heterogeneous-structured low-Mn lightweight steels, suggesting that LTP maybe desirable for broad industrial applications at an economic cost.展开更多
To determine the locked and slip parts on a fault,we simulated the movement pattern of the fault with a combined model consisting of a negative dislocation in the locked area superimposed on a relative movement betwee...To determine the locked and slip parts on a fault,we simulated the movement pattern of the fault with a combined model consisting of a negative dislocation in the locked area superimposed on a relative movement between two sides of the fault.In this way,we determined the locked parts of faults by inversion with multiple epochs of geodetic data.In this paper,we have determined the movement patterns of four main faults in western Yunnan by inversion with two epochs of geodetic surveys and some crossing-fault observations.From the inversion result,we have identified the areas around Dali and Xiangyun to be the locked area,which is regarded as a sign of potential earthquake sources.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 51874023, 51601011 and U1860206)the Fundamental Research Funds for the Central Universities, Recruitment Program of Global Experts.
文摘The effect of a pulsed electric current on the residual stress evolution of metal materials has been investigated.It was found that the surface and internal residual stresses in the as-quenched samples were reduced dramatically by electropulsing.A large number of experimental data show that the residual stress reduction is proportional to the initial residual stress and related to the material properties and electropulsing parameters.Under the combined actions of drift electrons,Joule heating,and residual stress,the dislocation mobility was enhanced,resulting in plastic strain and the decrease in residual stress.Drift electrons played a unique role in the electropulsing treatment,acting as an additional force pushing dislocations forward.The dislocations ultimately accumulated at a grain boundary,forming a parallel arrangement.Finally,the phenomenological equation of the residual stress evolution under electropulsing was derived from the experimental data.
基金This work was financially supported by the National Natural Science Foundation of China(No.52101022)the Shaanxi Province Natural Science Foundation(No.2021JQ-080).
文摘Hydrogen embrittlement(HE)poses a significant challenge for the development of high-strength metallic materials.However,explanations for the observed HE phenomena are still under debate.To shed light on this issue,here we investigated the hydrogen-defect interaction by comparing the dislocation structure evolution after hydrogen adsorption and desorption in a Fe-28Mn-0.3C(wt%)twinning-induced plasticity steel with an austenitic structure using in situ electron channeling contrast imaging.The results indicate that hydrogen can strongly affect dislocation activities.In detail,hydrogen can promote the formation of stacking faults with a long dissociation distance.Besides,dislocation movements are frequently observed during hydrogen desorption.The required resolved shear stress is considered to be the residual stresses rendered by hydrogen segregation.Furthermore,the microstructural heterogeneity could lead to the discrepancy of dislocation activities even within the same materials.
基金The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.Patent application(Korean Patent application number 10-2020-0172118)has been filed based on the results of this study。
文摘High- and medium-Mn (H/M-Mn) base lightweight steels are a class of ultrastrong structural materials with high ductility compared to their low-Mn counterparts with low strength and poor ductility.However, producing these H/M-Mn materials requires the advanced or high-tech manufacturing techniques, which can unavoidably provoke labor and cost concerns. Herein, we have developed a facilestrategy that circumvents the strength–ductility trade-off in low-Mn ferritic lightweight steels, by employing low-temperature tempering-induced partitioning (LTP). This LTP treatment affords a typical Fe-2.8Mn-5.7Al-0.3C (wt.%) steel with a heterogeneous size-distribution of metastable austenite embeddedin a ferrite matrix for partitioning more carbon into smaller austenite grains than into the larger austenite ones. This size-dependent partitioning results in slip plane spacing modification and lattice strain,which act through dislocation engineering. We ascribe the simultaneous improvement in strength andtotal elongation to both the size-dependent dislocation movement in austenite grains and the controlleddeformation-induced martensitic transformation. The low-carbon-partitioned large austenite grains increase the strength and ductility as a consequence of the combined martensitic transformation andhigh dislocation density-induced hardening and by interface strengthening. Additionally, high-carbonpartitioned small austenite grains enhance the strength and ductility by planar dislocation glide (inthe low strain regime) and by cross-slipping and delayed martensitic transformation (in the high strainregime). The concept of size-dependent dislocation engineering may provide different pathways for developing a wide range of heterogeneous-structured low-Mn lightweight steels, suggesting that LTP maybe desirable for broad industrial applications at an economic cost.
文摘To determine the locked and slip parts on a fault,we simulated the movement pattern of the fault with a combined model consisting of a negative dislocation in the locked area superimposed on a relative movement between two sides of the fault.In this way,we determined the locked parts of faults by inversion with multiple epochs of geodetic data.In this paper,we have determined the movement patterns of four main faults in western Yunnan by inversion with two epochs of geodetic surveys and some crossing-fault observations.From the inversion result,we have identified the areas around Dali and Xiangyun to be the locked area,which is regarded as a sign of potential earthquake sources.
