In order to ensure the safety of long-distance oil and natural gas transmission pipeline installed in seismic and/or permafrost region, high strength pipeline steel with excellent deformability has been developed. The...In order to ensure the safety of long-distance oil and natural gas transmission pipeline installed in seismic and/or permafrost region, high strength pipeline steel with excellent deformability has been developed. The ferrite and bainite dual phase pipeline steel is a very important kind of high deformability pipeline steel. Polygonal ferrite is a key microstructure in ferrite and bainite dual phase deformability pipeline steel. Ferrite evolution during isothermal process at 700 ℃ after 50% deformation at 800 ℃ was conducted by using a Gleeble-3800 thermal simulator, and microstructure was characterized by using an optical microscope, a scanning electron microscope and a transmission electron microscope. There are two types of ferrite, ferrite with high density dislocation and ferrite with a little dis location. There is about 7% （volume percent） deformation induced ferrite （DIF） for compression of 50% at 800 ℃ and strain rate of 1 s-1. During the isothermal process at 700 ℃, with the holding time increasing, ferrite volume percent, ferrite grain number and average ferrite grain size increase. As the holding time is prolonged, dislocation re-covery occurs in DIF. There are secondary phases in ferrite when the holding time is too long, and secondary phases and dislocation formation in dislocation pinning.展开更多
A cellular automaton（CA） modeling of discontinuous dynamic recrystallization（DDRX） of a near-α Ti-6Al-2Zr-1Mo-1V（TA15） isothermally compressed in the β single phase field was presented.In the CA model,nucleati...A cellular automaton（CA） modeling of discontinuous dynamic recrystallization（DDRX） of a near-α Ti-6Al-2Zr-1Mo-1V（TA15） isothermally compressed in the β single phase field was presented.In the CA model,nucleation of the β-DDRX and the growth of recrystallized grains（re-grains） were considered and visibly simulated by the CA model.The driving force of re-grain growth was provided by dislocation density accumulating around the grain boundaries.To verify the CA model,the predicted flow stress by the CA model was compared with the experimental data.The comparison showed that the average relative errors were10.2%,10.1%and 6%,respectively,at 1.0,0.1 and 0.01 s^-1 of 1020 ℃,and were 10.2%,11.35%and 7.5%,respectively,at 1.0,0.1and 0.01 s^-1 of 1050 ℃.The CA model was further applied to predicting the average growth rate,average re-grain size and recrystallization kinetics.The simulated results showed that the average growth rate increases with the increasing strain rate or temperature,while the re-grain size increases with the decreasing strain rate;the volume fraction of recrystallization decreases with the increasing strain rate or decreasing temperature.展开更多
The precipitation kinetics of 2519 A aluminum alloy after different cold rolling reductions before aging was investigated by hardness test and differential scanning calorimetry（DSC）. The activation energy was calcul...The precipitation kinetics of 2519 A aluminum alloy after different cold rolling reductions before aging was investigated by hardness test and differential scanning calorimetry（DSC）. The activation energy was calculated according to DSC curves using single heating rate method. The microstructures of as-rolled and peak-aged alloys were observed by transmission electron microscopy（TEM）. The result shows that the age hardenability reduces and the activation energy rises with increasing the reduction from 7% to 40%. Nonuniform dislocations are found in as-rolled alloy and inhomogeneous distribution of θ′ phase is revealed in peak-aged alloy when the reduction is 15%. The inhomogeneous distribution of θ′ phase may be related to the age hardenability reducing and activation energy rising.展开更多
文摘In order to ensure the safety of long-distance oil and natural gas transmission pipeline installed in seismic and/or permafrost region, high strength pipeline steel with excellent deformability has been developed. The ferrite and bainite dual phase pipeline steel is a very important kind of high deformability pipeline steel. Polygonal ferrite is a key microstructure in ferrite and bainite dual phase deformability pipeline steel. Ferrite evolution during isothermal process at 700 ℃ after 50% deformation at 800 ℃ was conducted by using a Gleeble-3800 thermal simulator, and microstructure was characterized by using an optical microscope, a scanning electron microscope and a transmission electron microscope. There are two types of ferrite, ferrite with high density dislocation and ferrite with a little dis location. There is about 7% （volume percent） deformation induced ferrite （DIF） for compression of 50% at 800 ℃ and strain rate of 1 s-1. During the isothermal process at 700 ℃, with the holding time increasing, ferrite volume percent, ferrite grain number and average ferrite grain size increase. As the holding time is prolonged, dislocation re-covery occurs in DIF. There are secondary phases in ferrite when the holding time is too long, and secondary phases and dislocation formation in dislocation pinning.
基金Projects (50935007,51175428) supported by the National Natural Science Foundation of ChinaProject (2010CB731701) supported by the National Basic Research Program of China+2 种基金Project (NPU-FFR-JC20100229) supported by the Foundation for Fundamental Research of Northwestern Polytechnical University in ChinaProject (27-TZ-2010) supported by the Research Fund of the State Key Laboratory of Solidification Processing,ChinaProject (B08040) supported by the Program of Introducing Talents of Discipline to University,China
文摘A cellular automaton（CA） modeling of discontinuous dynamic recrystallization（DDRX） of a near-α Ti-6Al-2Zr-1Mo-1V（TA15） isothermally compressed in the β single phase field was presented.In the CA model,nucleation of the β-DDRX and the growth of recrystallized grains（re-grains） were considered and visibly simulated by the CA model.The driving force of re-grain growth was provided by dislocation density accumulating around the grain boundaries.To verify the CA model,the predicted flow stress by the CA model was compared with the experimental data.The comparison showed that the average relative errors were10.2%,10.1%and 6%,respectively,at 1.0,0.1 and 0.01 s^-1 of 1020 ℃,and were 10.2%,11.35%and 7.5%,respectively,at 1.0,0.1and 0.01 s^-1 of 1050 ℃.The CA model was further applied to predicting the average growth rate,average re-grain size and recrystallization kinetics.The simulated results showed that the average growth rate increases with the increasing strain rate or temperature,while the re-grain size increases with the decreasing strain rate;the volume fraction of recrystallization decreases with the increasing strain rate or decreasing temperature.
基金Project(2012CB619500)supported by the National Basic Research Program of China
文摘The precipitation kinetics of 2519 A aluminum alloy after different cold rolling reductions before aging was investigated by hardness test and differential scanning calorimetry（DSC）. The activation energy was calculated according to DSC curves using single heating rate method. The microstructures of as-rolled and peak-aged alloys were observed by transmission electron microscopy（TEM）. The result shows that the age hardenability reduces and the activation energy rises with increasing the reduction from 7% to 40%. Nonuniform dislocations are found in as-rolled alloy and inhomogeneous distribution of θ′ phase is revealed in peak-aged alloy when the reduction is 15%. The inhomogeneous distribution of θ′ phase may be related to the age hardenability reducing and activation energy rising.
