增材制造是融合材料科学、机械自动化及信息技术的先进制造技术,在近30年的发展中,发挥着越来越重要的作用。激光金属沉积(Laser metal deposition,LMD)是基于定向能量沉积(Directed energy deposition,DED)的一种增材制造技术,在近年...增材制造是融合材料科学、机械自动化及信息技术的先进制造技术,在近30年的发展中,发挥着越来越重要的作用。激光金属沉积(Laser metal deposition,LMD)是基于定向能量沉积(Directed energy deposition,DED)的一种增材制造技术,在近年来受到广泛关注和研究。阐述了LMD技术的基本工作原理及系统组成,重点介绍LMD技术国内外研究进展及应用现状,列举了一些基于LMD的工艺技术开发及装备研发制造,指出了LMD技术在成形效率和成形精度、工艺稳定性及性能一致性等方面的不足。最后,总结了LMD技术未来的5个发展趋势:材料体系集约化、工艺参数系统化、成形过程高效化、设备集成智能化和应用领域广泛化。展开更多
This work aims to establish the effect of laser energy area density(EAD) as the laser incident energy on density, microstructures and mechanical properties of direct laser deposition(DLD) 12CrNi2 Y alloy steel.The res...This work aims to establish the effect of laser energy area density(EAD) as the laser incident energy on density, microstructures and mechanical properties of direct laser deposition(DLD) 12CrNi2 Y alloy steel.The results show that the density of DLD 12CrNi2 Y alloy steel increases at initial stage and then decreases with an increase of EAD, the highest density of alloy steel sample is 98.95%. The microstructures of DLD12CrNi2 Y alloy steel samples are composed of bainite, ferrite and carbide. With increase of EAD, the microstructures transform from polygonal ferrite(PF) to granular bainite(GB). The martensite-austenite constituent(M-A) in GB transforms from flake-like paralleling to the bainite ferrite laths to granular morphology. It is also found that the average width of laths in finer GB can be refined from 532 nm to 302 nm, which improves the comprehensive properties of DLD 12 CrNi2 Y alloy steel such as high hardness of 342 ± 9 HV_(0.2), yield strength of 702 ± 16 MPa, tensile strength of 901 ± 14 MPa and large elongation of15.2%±0.6%. The DLD 12CrNi2 Y material with good strength and toughness could meet the demand of alloy steel components manufacturing.展开更多
The present work aims to investigate the fatigue behavior of Direct Laser Deposition(DLD) Ti-6.5 Al-2 Zr-1 Mo-1 V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5 Al-2 Zr-1 Mo-1 V titanium alloy...The present work aims to investigate the fatigue behavior of Direct Laser Deposition(DLD) Ti-6.5 Al-2 Zr-1 Mo-1 V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5 Al-2 Zr-1 Mo-1 V titanium alloy standard cylinder specimens were tested under a stress level of 800 MPa with a stress ratio of 0.06. Fatigue fractography and fatigue life data were obtained.Through the fracture surface analysis, the specimens were divided into two categories in accordance with the location of crack initiation and defect types. Comparison of fatigue life and behavior between two specimen types was given, which was followed by a discussion about the impact of defect type, size and position on the fatigue life of the specimen. The fatigue test results also show a large variation of fatigue life. To illustrate the statistical characteristics of the fatigue life, probabilistic analysis was performed, and a novel bimodal lognormal model was established. The model has a good fit with the experimental data and can reduce the scatter of the fatigue life significantly.展开更多
Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influenc...Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influence of the structural depth of line patterns coated with multi-walled carbon nanotubes(CNTs)and carbon onions(COs)on their respective potential to reduce friction and wear.Direct laser interference patterning(DLIP)with a pulse duration of 12 ps is used to create line patterns with three different structural depths at a periodicity of 3.5μm on AISI 304 steel platelets.Subsequently,electrophoretic deposition(EPD)is applied to form homogeneous carbon nanoparticle coatings on the patterned platelets.Tribological ball-on-disc experiments are conducted on the as-described surfaces with an alumina counter body at a load of 100 mN.The results show that the shallower the coated structure,the lower its coefficient of friction(COF),regardless of the particle type.Thereby,with a minimum of just below 0.20,CNTs reach lower COF values than COs over most of the testing period.The resulting wear tracks are characterized by scanning electron microscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy.During friction testing,the CNTs remain in contact,and the immediate proximity,whereas the CO coating is largely removed.Regardless of structural depth,no oxidation occurs on CNT-coated surfaces,whereas minor oxidation is detected on CO-coated wear tracks.展开更多
As a new direct metal prototyping technology,the hybrid plasma and laser deposition manufacturing (PLDM) is proposed in this paper. In order to figure out the characteristics of plasma arc beam and mould in the PLDM p...As a new direct metal prototyping technology,the hybrid plasma and laser deposition manufacturing (PLDM) is proposed in this paper. In order to figure out the characteristics of plasma arc beam and mould in the PLDM process of high temperature alloy, the high speed CCD camera is used to obtain the picture around the plasma arc. Afterwards the sketch of picture is clearly obtained. And the effect of laser parameter, such as average power, pulse width, pulse repetition frequency and the angle between laser beam and plasma arc beam on the plasma arc appearance, is studied experimentally. The results show that the modality of plasma arc beam is markedly influenced by laser beam. And the improvements of shape precision and surface state of the layer deposited by PLDM are confirmed.展开更多
文摘增材制造是融合材料科学、机械自动化及信息技术的先进制造技术,在近30年的发展中,发挥着越来越重要的作用。激光金属沉积(Laser metal deposition,LMD)是基于定向能量沉积(Directed energy deposition,DED)的一种增材制造技术,在近年来受到广泛关注和研究。阐述了LMD技术的基本工作原理及系统组成,重点介绍LMD技术国内外研究进展及应用现状,列举了一些基于LMD的工艺技术开发及装备研发制造,指出了LMD技术在成形效率和成形精度、工艺稳定性及性能一致性等方面的不足。最后,总结了LMD技术未来的5个发展趋势:材料体系集约化、工艺参数系统化、成形过程高效化、设备集成智能化和应用领域广泛化。
基金financially supported by the National Key R&D Program of China (No. 2016YFB1100201)the Green Manufacturing System Integration Project of the Industry and Information Ministry of China (2017)the Research and development plan for the future emerging industries in Shenyang (18-004-2-26)
文摘This work aims to establish the effect of laser energy area density(EAD) as the laser incident energy on density, microstructures and mechanical properties of direct laser deposition(DLD) 12CrNi2 Y alloy steel.The results show that the density of DLD 12CrNi2 Y alloy steel increases at initial stage and then decreases with an increase of EAD, the highest density of alloy steel sample is 98.95%. The microstructures of DLD12CrNi2 Y alloy steel samples are composed of bainite, ferrite and carbide. With increase of EAD, the microstructures transform from polygonal ferrite(PF) to granular bainite(GB). The martensite-austenite constituent(M-A) in GB transforms from flake-like paralleling to the bainite ferrite laths to granular morphology. It is also found that the average width of laths in finer GB can be refined from 532 nm to 302 nm, which improves the comprehensive properties of DLD 12 CrNi2 Y alloy steel such as high hardness of 342 ± 9 HV_(0.2), yield strength of 702 ± 16 MPa, tensile strength of 901 ± 14 MPa and large elongation of15.2%±0.6%. The DLD 12CrNi2 Y material with good strength and toughness could meet the demand of alloy steel components manufacturing.
基金the support from the National Key Research and Development Program of China (No. 2017YFB1104003)the National Natural Science Foundation of China (No. 11772027)Aeronautical Science Foundation of China (No. 28163701002)
文摘The present work aims to investigate the fatigue behavior of Direct Laser Deposition(DLD) Ti-6.5 Al-2 Zr-1 Mo-1 V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5 Al-2 Zr-1 Mo-1 V titanium alloy standard cylinder specimens were tested under a stress level of 800 MPa with a stress ratio of 0.06. Fatigue fractography and fatigue life data were obtained.Through the fracture surface analysis, the specimens were divided into two categories in accordance with the location of crack initiation and defect types. Comparison of fatigue life and behavior between two specimen types was given, which was followed by a discussion about the impact of defect type, size and position on the fatigue life of the specimen. The fatigue test results also show a large variation of fatigue life. To illustrate the statistical characteristics of the fatigue life, probabilistic analysis was performed, and a novel bimodal lognormal model was established. The model has a good fit with the experimental data and can reduce the scatter of the fatigue life significantly.
基金financial support by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)within the project MU 959/47-1Furthermore,the authors gratefully acknowledge funding in the ZuMat projectsupported by the State of Saarland from the European Regional Development Fund(Europäischer Fonds für Regionale Entwicklung,EFRE).P.Grützmacher and C.Gachot would like to thank the Government of Lower Austria(WST3)for financially supporting the endowed professorship tribology at the TU Wien.V.Presser thanks Eduard Arzt(INM)for his continuing support.
文摘Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influence of the structural depth of line patterns coated with multi-walled carbon nanotubes(CNTs)and carbon onions(COs)on their respective potential to reduce friction and wear.Direct laser interference patterning(DLIP)with a pulse duration of 12 ps is used to create line patterns with three different structural depths at a periodicity of 3.5μm on AISI 304 steel platelets.Subsequently,electrophoretic deposition(EPD)is applied to form homogeneous carbon nanoparticle coatings on the patterned platelets.Tribological ball-on-disc experiments are conducted on the as-described surfaces with an alumina counter body at a load of 100 mN.The results show that the shallower the coated structure,the lower its coefficient of friction(COF),regardless of the particle type.Thereby,with a minimum of just below 0.20,CNTs reach lower COF values than COs over most of the testing period.The resulting wear tracks are characterized by scanning electron microscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy.During friction testing,the CNTs remain in contact,and the immediate proximity,whereas the CO coating is largely removed.Regardless of structural depth,no oxidation occurs on CNT-coated surfaces,whereas minor oxidation is detected on CO-coated wear tracks.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 50474053)the State High-Technology Development Program of China (Grant No. 2003AA421150).
文摘As a new direct metal prototyping technology,the hybrid plasma and laser deposition manufacturing (PLDM) is proposed in this paper. In order to figure out the characteristics of plasma arc beam and mould in the PLDM process of high temperature alloy, the high speed CCD camera is used to obtain the picture around the plasma arc. Afterwards the sketch of picture is clearly obtained. And the effect of laser parameter, such as average power, pulse width, pulse repetition frequency and the angle between laser beam and plasma arc beam on the plasma arc appearance, is studied experimentally. The results show that the modality of plasma arc beam is markedly influenced by laser beam. And the improvements of shape precision and surface state of the layer deposited by PLDM are confirmed.
