The 1.6GeV synchrotron of China Spallation Neutron Source(CSNS)project is a Rapid Cycling Synchrotron (RCS),which accelerates a high-intensity proton beam from 80MeV to 1.6GeV at a repetition rate of 25Hz.The RCS magn...The 1.6GeV synchrotron of China Spallation Neutron Source(CSNS)project is a Rapid Cycling Synchrotron (RCS),which accelerates a high-intensity proton beam from 80MeV to 1.6GeV at a repetition rate of 25Hz.The RCS magnet system consists of 24 dipole magnets(main dipoles),48 quadrupole magnets(main quadrupoles),16 sextupole magnets,some tune shift quadrupoles and corrector magnets.All the magnets are of large aperture for a high beam power of 0.1MW,one design issue is the fringe field at pole end.And the main dipoles and main quadrupoles work at 25Hz repetition rate,the eddy current is an additional issue.In this paper the magnet design of the two kinds of main magnets will be described.展开更多
The conventional magnetic resonance imaging(MRI)equipment cannot measure large volume samples nondestructively in the engineering site for its heavy weight and closed structure.In order to realize the mobile MRI,this ...The conventional magnetic resonance imaging(MRI)equipment cannot measure large volume samples nondestructively in the engineering site for its heavy weight and closed structure.In order to realize the mobile MRI,this study focuses on the design of gradient coil of unilateral magnet.The unilateral MRI system is used to image the local area above the magnet.The current density distribution of the gradient coil cannot be used as a series of superconducting nuclear magnetic resonance gradient coils,because the region of interest(ROI)and the wiring area of the unilateral magnet are both cylindrical side arc surfaces.Therefore,the equivalent magnetic dipole method is used to design the gradient coil,and the algorithm is improved for the special case of the wiring area and the ROI,so the X and Y gradient coils are designed.Finally,a flexible printed circuit board(PCB)is used to fabricate the gradient coil,and the magnetic field distribution of the ROI is measured by a Gauss meter,and the measured results match with the simulation results.The gradient linearities of x and y coils are 2.82%and 3.56%,respectively,less than 5%of the commercial gradient coil requirement.展开更多
The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research （FAIR） is an international cooperation project. The collaborative simulation and testing of the deve...The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research （FAIR） is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional （3D） electromagnetic （EM） model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278 A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite （G10） spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta173 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.展开更多
文摘The 1.6GeV synchrotron of China Spallation Neutron Source(CSNS)project is a Rapid Cycling Synchrotron (RCS),which accelerates a high-intensity proton beam from 80MeV to 1.6GeV at a repetition rate of 25Hz.The RCS magnet system consists of 24 dipole magnets(main dipoles),48 quadrupole magnets(main quadrupoles),16 sextupole magnets,some tune shift quadrupoles and corrector magnets.All the magnets are of large aperture for a high beam power of 0.1MW,one design issue is the fringe field at pole end.And the main dipoles and main quadrupoles work at 25Hz repetition rate,the eddy current is an additional issue.In this paper the magnet design of the two kinds of main magnets will be described.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51677008,51377182,51707028,and 11647098)the Fundamental Research Funds of the Central Universities,China(Grant No.106112017CDJQJ158834)the State Key Development Program for Basic Research of China(Grant No.2014CB541602)
文摘The conventional magnetic resonance imaging(MRI)equipment cannot measure large volume samples nondestructively in the engineering site for its heavy weight and closed structure.In order to realize the mobile MRI,this study focuses on the design of gradient coil of unilateral magnet.The unilateral MRI system is used to image the local area above the magnet.The current density distribution of the gradient coil cannot be used as a series of superconducting nuclear magnetic resonance gradient coils,because the region of interest(ROI)and the wiring area of the unilateral magnet are both cylindrical side arc surfaces.Therefore,the equivalent magnetic dipole method is used to design the gradient coil,and the algorithm is improved for the special case of the wiring area and the ROI,so the X and Y gradient coils are designed.Finally,a flexible printed circuit board(PCB)is used to fabricate the gradient coil,and the magnetic field distribution of the ROI is measured by a Gauss meter,and the measured results match with the simulation results.The gradient linearities of x and y coils are 2.82%and 3.56%,respectively,less than 5%of the commercial gradient coil requirement.
基金supported by ASIPP under contract MOU-GSI-ACC-2005-01the Special Fund of Talent Development of Anhui Province(No.2009Z056)+1 种基金the Research Fund for the Doctoral Program of Anhui University of Architecture(No.K02425)the Fund of Anhui Educational Committee(No.KJ2010B036)
文摘The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research （FAIR） is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional （3D） electromagnetic （EM） model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278 A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite （G10） spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta173 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.
