Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crysta...Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crystalline TiO2 coating was deposited using a composite powder composed of polyethylene glycol (PEG) and 25 nm TiO2 particles by vacuum cold spraying (VCS) process. A commercial N-719 dye was used to adsorb on the surface of TiO2 coating to prepare TiO2 electrode, which was applied to assemble dye-sensitized solar cell (DSC). The cell performance was measured under simulated solar light at an intensity of 100 mW·cm-2. Results show that with an FTO substrate the DSC composed of a VCS TiO2 electrode untreated by TiCl4 gives a short-circuit current density of 13.1 mA·cm-2 and an open circuit voltage of 0.60 V corresponding to an overall conversion efficiency of 4.4%. It is found that after TiCl4 treatment to the VCS TiO2 electrode with an FTO substrate, the short circuit current density of the cell increases by 31%, the open-circuit voltage increases by 60 mV and a higher conversion yield of 6.5% was obtained. However, when an ITO substrate is used to deposit TiO2 coating by VCS, after TiCl4 treatment, the conversion efficiency of the assembled cell reduces slightly due to corrosion of the conducting layer on the ITO glass by TiCl4.展开更多
Poly-crystalline anatase TiO2 layer fabricated by LPCVD using titanium-tetra-iso-propoxide and NbF5 in H2-ambient was treated in conc.-HCl solution after thin layer of IIIb-group metal was deposited on the TiO2 layer....Poly-crystalline anatase TiO2 layer fabricated by LPCVD using titanium-tetra-iso-propoxide and NbF5 in H2-ambient was treated in conc.-HCl solution after thin layer of IIIb-group metal was deposited on the TiO2 layer. Resistivity of the as-deposited layer about 1 × 10-1 Ω·cm was drastically reduced to 3 × 10-3 Ω·cm by the wet-treatment using indium. Temperature dependence of the resistivity increased with temperature above 100 K for the wet-treated layer was quite different from that decreased above 100 K for the as-deposited layer, whereas the resistivity was saturated at lower temperatures. The resistivity at room-temperature was decreased with the thickness before the wet-treatment but independent on the thickness above 100 nm for the wet-treated layer. Indium was more effective for the resistivity reduction than gallium but aluminum was not useful for the treatment. As the results that the wet-treatment using indium was examined for the TiO2 layers deposited by various conditions, the optimum deposition condition to reduce the resistivity of the layer after the wet-treatment was clearly different from that for the as-deposited layer.展开更多
TiO_2 visible light catalysts with different crystalline phases and morphologies were synthesized from titanium-bearing electric arc furnace molten slag（Ti-bearing EAF slag）by using a simple acidolysis process.The e...TiO_2 visible light catalysts with different crystalline phases and morphologies were synthesized from titanium-bearing electric arc furnace molten slag（Ti-bearing EAF slag）by using a simple acidolysis process.The effects of the p H of the HCl solution,liquid to solid ratio（RL/S,HCl solution to the residue ratio,m L/g） and acidolysis time on the micro-morphology and crystalline phase of as-prepared TiO_2 photocatalysts were systematically investigated.The results indicated that with decreasing p H in the HCl solution and increasing RL/S,the crystalline phase and micro-morphology of the obtained TiO_2 nanostructures tended to transform from anatase type TiO_2 with spherical nanoparticle structures to rutile type TiO_2 with needle-like nanorod structures.The acidolysis time had little influence on the crystalline phase but great impact on the size of the obtained TiO_2.The growth mechanism of TiO_2 from Ti-bearing EAF slag during the acidolysis process was also discussed.In addition,the influence of RL/Son the photocatalytic properties of the synthesized nanostructured TiO_2 was studied.The results showed that the photodegradation efficiency for Rhodamine B solution could reach 91.00% in 120 min when the RL/Swas controlled at 50：1.展开更多
文摘Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crystalline TiO2 coating was deposited using a composite powder composed of polyethylene glycol (PEG) and 25 nm TiO2 particles by vacuum cold spraying (VCS) process. A commercial N-719 dye was used to adsorb on the surface of TiO2 coating to prepare TiO2 electrode, which was applied to assemble dye-sensitized solar cell (DSC). The cell performance was measured under simulated solar light at an intensity of 100 mW·cm-2. Results show that with an FTO substrate the DSC composed of a VCS TiO2 electrode untreated by TiCl4 gives a short-circuit current density of 13.1 mA·cm-2 and an open circuit voltage of 0.60 V corresponding to an overall conversion efficiency of 4.4%. It is found that after TiCl4 treatment to the VCS TiO2 electrode with an FTO substrate, the short circuit current density of the cell increases by 31%, the open-circuit voltage increases by 60 mV and a higher conversion yield of 6.5% was obtained. However, when an ITO substrate is used to deposit TiO2 coating by VCS, after TiCl4 treatment, the conversion efficiency of the assembled cell reduces slightly due to corrosion of the conducting layer on the ITO glass by TiCl4.
文摘Poly-crystalline anatase TiO2 layer fabricated by LPCVD using titanium-tetra-iso-propoxide and NbF5 in H2-ambient was treated in conc.-HCl solution after thin layer of IIIb-group metal was deposited on the TiO2 layer. Resistivity of the as-deposited layer about 1 × 10-1 Ω·cm was drastically reduced to 3 × 10-3 Ω·cm by the wet-treatment using indium. Temperature dependence of the resistivity increased with temperature above 100 K for the wet-treated layer was quite different from that decreased above 100 K for the as-deposited layer, whereas the resistivity was saturated at lower temperatures. The resistivity at room-temperature was decreased with the thickness before the wet-treatment but independent on the thickness above 100 nm for the wet-treated layer. Indium was more effective for the resistivity reduction than gallium but aluminum was not useful for the treatment. As the results that the wet-treatment using indium was examined for the TiO2 layers deposited by various conditions, the optimum deposition condition to reduce the resistivity of the layer after the wet-treatment was clearly different from that for the as-deposited layer.
基金supported by the National Basic Research Program of China(Nos.2014CB643401,2013AA032003)the National Nature Science Foundation of China(Nos.51372019,51277025 and 51072022)
文摘TiO_2 visible light catalysts with different crystalline phases and morphologies were synthesized from titanium-bearing electric arc furnace molten slag（Ti-bearing EAF slag）by using a simple acidolysis process.The effects of the p H of the HCl solution,liquid to solid ratio（RL/S,HCl solution to the residue ratio,m L/g） and acidolysis time on the micro-morphology and crystalline phase of as-prepared TiO_2 photocatalysts were systematically investigated.The results indicated that with decreasing p H in the HCl solution and increasing RL/S,the crystalline phase and micro-morphology of the obtained TiO_2 nanostructures tended to transform from anatase type TiO_2 with spherical nanoparticle structures to rutile type TiO_2 with needle-like nanorod structures.The acidolysis time had little influence on the crystalline phase but great impact on the size of the obtained TiO_2.The growth mechanism of TiO_2 from Ti-bearing EAF slag during the acidolysis process was also discussed.In addition,the influence of RL/Son the photocatalytic properties of the synthesized nanostructured TiO_2 was studied.The results showed that the photodegradation efficiency for Rhodamine B solution could reach 91.00% in 120 min when the RL/Swas controlled at 50：1.
