Solar photo voltaic array （SPVA） generates a smaller amount of power than the standard rating of the panel due to the partial shading effect. Since the modules of the arrays receive different solar irradiations, the...Solar photo voltaic array （SPVA） generates a smaller amount of power than the standard rating of the panel due to the partial shading effect. Since the modules of the arrays receive different solar irradiations, the P-V characteristics ofphotovoltaic （PV） arrays contain multiple peaks or local peaks. This paper presents an innovative method （magic square） in order to increase the generated power by configuring the modules of a shaded photo- voltaic array. In this approach, the physical location of the modules in the total cross tied （TCT） connected in the solar PV array is rearranged based on the magic square arrangement pattern. This connection is done without altering any electrical configurations of the modules in the PV array. This method can distribute the shading effect over the entire PV array, without concentrating on any row of modules and can achieve global peaks. For different types of shading patterns, the output power of the solar PV array with the proposed magic square configuration is compared with the traditional configurations and the performance is calculated. This paper presents a new reconfiguration technique for solar PV arrays, which increases the PV power under different shading conditions. The proposed technique facilitates the distribution of the effect of shading over the entire array, thereby, reducing the mismatch losses caused by partial shading. The theoretical calculations are tested through simulations in Matlab/ Simulink to validate the results. A comparison of power loss for different types of topologies under different types of shading patterns for a 4 × 4 array is also explained.展开更多
This paper applies the innovative idea of DLCI to PV array reconfiguration under various PSCs to capture the maxi-mum output power of a PV generation system.DLCI is a hybrid algorithm that integrates multiple meta-heu...This paper applies the innovative idea of DLCI to PV array reconfiguration under various PSCs to capture the maxi-mum output power of a PV generation system.DLCI is a hybrid algorithm that integrates multiple meta-heuristic algo-rithms.Through the competition and cooperation of the search mechanisms of different metaheuristic algorithms,the local exploration and global development of the algorithm can be effectively improved to avoid power mismatch of the PV system caused by the algorithm falling into a local optimum.A series of discrete operations are performed on DLCI to solve the discrete optimization problem of PV array reconfiguration.Two structures(DLCI-I and DLCI-II)are designed to verify the effect of increasing the number of sub-optimizers on the optimized performance of DLCI by simulation based on 10 cases of PSCs.The simulation shows that the increase of the number of sub-optimizers only gives a relatively small improvement on the DLCI optimization performance.DLCI has a significant effect on the reduction in the number of power peaks caused by PSC.The PV array-based reconstruction system of DLCI-II is reduced by 4.05%,1.88%,1.68%,0.99%and 3.39%,when compared to the secondary optimization algorithms.展开更多
文摘Solar photo voltaic array （SPVA） generates a smaller amount of power than the standard rating of the panel due to the partial shading effect. Since the modules of the arrays receive different solar irradiations, the P-V characteristics ofphotovoltaic （PV） arrays contain multiple peaks or local peaks. This paper presents an innovative method （magic square） in order to increase the generated power by configuring the modules of a shaded photo- voltaic array. In this approach, the physical location of the modules in the total cross tied （TCT） connected in the solar PV array is rearranged based on the magic square arrangement pattern. This connection is done without altering any electrical configurations of the modules in the PV array. This method can distribute the shading effect over the entire PV array, without concentrating on any row of modules and can achieve global peaks. For different types of shading patterns, the output power of the solar PV array with the proposed magic square configuration is compared with the traditional configurations and the performance is calculated. This paper presents a new reconfiguration technique for solar PV arrays, which increases the PV power under different shading conditions. The proposed technique facilitates the distribution of the effect of shading over the entire array, thereby, reducing the mismatch losses caused by partial shading. The theoretical calculations are tested through simulations in Matlab/ Simulink to validate the results. A comparison of power loss for different types of topologies under different types of shading patterns for a 4 × 4 array is also explained.
基金National Natural Science Foundation of China(61963020,62263014)Yunnan Provincial Basic Research Project(202201AT070857).
文摘This paper applies the innovative idea of DLCI to PV array reconfiguration under various PSCs to capture the maxi-mum output power of a PV generation system.DLCI is a hybrid algorithm that integrates multiple meta-heuristic algo-rithms.Through the competition and cooperation of the search mechanisms of different metaheuristic algorithms,the local exploration and global development of the algorithm can be effectively improved to avoid power mismatch of the PV system caused by the algorithm falling into a local optimum.A series of discrete operations are performed on DLCI to solve the discrete optimization problem of PV array reconfiguration.Two structures(DLCI-I and DLCI-II)are designed to verify the effect of increasing the number of sub-optimizers on the optimized performance of DLCI by simulation based on 10 cases of PSCs.The simulation shows that the increase of the number of sub-optimizers only gives a relatively small improvement on the DLCI optimization performance.DLCI has a significant effect on the reduction in the number of power peaks caused by PSC.The PV array-based reconstruction system of DLCI-II is reduced by 4.05%,1.88%,1.68%,0.99%and 3.39%,when compared to the secondary optimization algorithms.
