Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels （HNSS） were investigated by electrochemical and immersion testing methods in chloride solution, respectively. The chemic...Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels （HNSS） were investigated by electrochemical and immersion testing methods in chloride solution, respectively. The chemical constitution and composition in the depth of passive films formed on HNSS were analyzed by X-ray photoelectron spectrum （XPS）. HNSS has excellent pitting and crevice corrosion resistance compared to 316L stainless steel. With increasing the nitrogen content in steels, pitting potentials and critical pitting temperature （CPT） increase, and the maximum, average pit depths and average weight loss decrease. The CPT of HNSS is correlated with the alloying element content through the measure of alloying for resistance to corrosion （MARC）. The MARC can be expressed as an equation of CPT=2.55MARC-29. XPS results show that HNSS exhibiting excellent corrosion resistance is attributed to the enrichment of nitrogen on the surface of passive films, which forms ammonium ions increasing the local pH value and facilitating repassivation, and the synergistic effects of molybdenum and nitrogen.展开更多
The authors presented a mechanistic model describing the chemical reactions within a corroded thin, narrow crevice. In the mathematical model, a two-dimensional steady-state was used to predict the crevice pH profile ...The authors presented a mechanistic model describing the chemical reactions within a corroded thin, narrow crevice. In the mathematical model, a two-dimensional steady-state was used to predict the crevice pH profile by taking into account dissolved oxygen and hydrogen ions within the crevice. It consists of six parallel electrochemical reactions： multi anodic reactions（Fe, Cr, Ni dissolution reactions） and three cathodic reactions（the oxygen reduction, the hydrogen reaction and water dissociation）. Current density distribution and oxygen concentration distribution were determined to be corresponding to the evolution of potential distribution within the crevice. The contribution of each metal reaction to the overall corrosion process was in proportion to the mole fraction, and the simulation pro vided a good agreement with published experimental results for the crevice corrosion of stainless steel in sodium chloride solution.展开更多
Electrochemical techniques were applied to study the crevice corrosion resistance of two types of stainless steel alloys namely, conventional 316L and 6% Mo super austenitic in acidified 3% NaCl solution at room tempe...Electrochemical techniques were applied to study the crevice corrosion resistance of two types of stainless steel alloys namely, conventional 316L and 6% Mo super austenitic in acidified 3% NaCl solution at room temperature.Potentiodynamic results showed that 6% Mo alloy possessed a remarkable resistance to crevice corrosion compared with 316L alloy when they are tested in the same solution. The breakdown potential at which passivity broke down for 316L alloy was 0.00 mV （SCE）. The corresponding value for 6% Mo alloy could not reach up to the potential value of 700 mV （SCE）. 316L alloy suffered extremely from crevice corrosion at room temperature （about 25℃）, which indicates that the critical crevice corrosion temperature, below which crevice corrosion does not occur, was lower than the test temperature. For 6% Mo alloy, the critical crevice corrosion temperature was higher than the testing temperature. Electrochemical parameters indicated that 6% Mo alloy exhibited higher crevice corrosion resistance than 316L alloy.展开更多
基金supported by the National Natural Science Foundation of China and Baosteel Group Corporation (No.50534010)
文摘Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels （HNSS） were investigated by electrochemical and immersion testing methods in chloride solution, respectively. The chemical constitution and composition in the depth of passive films formed on HNSS were analyzed by X-ray photoelectron spectrum （XPS）. HNSS has excellent pitting and crevice corrosion resistance compared to 316L stainless steel. With increasing the nitrogen content in steels, pitting potentials and critical pitting temperature （CPT） increase, and the maximum, average pit depths and average weight loss decrease. The CPT of HNSS is correlated with the alloying element content through the measure of alloying for resistance to corrosion （MARC）. The MARC can be expressed as an equation of CPT=2.55MARC-29. XPS results show that HNSS exhibiting excellent corrosion resistance is attributed to the enrichment of nitrogen on the surface of passive films, which forms ammonium ions increasing the local pH value and facilitating repassivation, and the synergistic effects of molybdenum and nitrogen.
基金Supported by the National Natural Science Foundation of China(No.40776044)the Knowledge Innovation Program ofChinese Acadenry of Sciences(No.KZCX2-YW-210)
文摘The authors presented a mechanistic model describing the chemical reactions within a corroded thin, narrow crevice. In the mathematical model, a two-dimensional steady-state was used to predict the crevice pH profile by taking into account dissolved oxygen and hydrogen ions within the crevice. It consists of six parallel electrochemical reactions： multi anodic reactions（Fe, Cr, Ni dissolution reactions） and three cathodic reactions（the oxygen reduction, the hydrogen reaction and water dissociation）. Current density distribution and oxygen concentration distribution were determined to be corresponding to the evolution of potential distribution within the crevice. The contribution of each metal reaction to the overall corrosion process was in proportion to the mole fraction, and the simulation pro vided a good agreement with published experimental results for the crevice corrosion of stainless steel in sodium chloride solution.
文摘Electrochemical techniques were applied to study the crevice corrosion resistance of two types of stainless steel alloys namely, conventional 316L and 6% Mo super austenitic in acidified 3% NaCl solution at room temperature.Potentiodynamic results showed that 6% Mo alloy possessed a remarkable resistance to crevice corrosion compared with 316L alloy when they are tested in the same solution. The breakdown potential at which passivity broke down for 316L alloy was 0.00 mV （SCE）. The corresponding value for 6% Mo alloy could not reach up to the potential value of 700 mV （SCE）. 316L alloy suffered extremely from crevice corrosion at room temperature （about 25℃）, which indicates that the critical crevice corrosion temperature, below which crevice corrosion does not occur, was lower than the test temperature. For 6% Mo alloy, the critical crevice corrosion temperature was higher than the testing temperature. Electrochemical parameters indicated that 6% Mo alloy exhibited higher crevice corrosion resistance than 316L alloy.
