Desulfurization performance with low binary basicity refining slag in 72 grade tire cord steel was calculated using FactSage and it is found that sulfur content in steel decreases with the increase of basicity of slag...Desulfurization performance with low binary basicity refining slag in 72 grade tire cord steel was calculated using FactSage and it is found that sulfur content in steel decreases with the increase of basicity of slag, MgO content in slag and slag/steel ratio while sulfur partition ratio between slag and steel increases gradually with the increase of basicity of slag as well as MgO content. Experiments were carried out and the results are of great agreements with theoretical calculation. Then industrial application tests were performed in a domestic plant and good results were achieved. Sulfur content in steel decreases gradually during refining process, as a result, sulfur content in the billets is controlled in the range of 0.007 1%-0.008 1%. Sulfur content in steel refined with slag basicity of 1.21 is lower than that of 1.02, while the plasticity of oxide compound inclusions is a little better controlled in low basicity heats. Using refining slag with basicity of 1.0-1.2 and MgO content of 5%-10% and reducing the slag takeover of LD are favorable for improving the desulfurization performance and the plasticity of inclusions during the industrial production.展开更多
Cu based composites reinforced by 0%～25% (volume fraction) carbon nanotubes were prepared.The fracture behaviors and the rolling properties of the composites and the effects of the volume fraction of the carbon nanot...Cu based composites reinforced by 0%～25% (volume fraction) carbon nanotubes were prepared.The fracture behaviors and the rolling properties of the composites and the effects of the volume fraction of the carbon nanotubes were studied.The experimental results show that the fracture toughness of the composites is related to the pulling out and bridging of the carbon nanotubes in the fracture process.With the volume fraction of the carbon nanotubes increasing, the Vicker’s hardness and the compactness of the composites increase first and then decrease. The peaks of the hardness and the compactness occur at 12%～15% of volume fraction of carbon nanotubes.Some proper ratio of rolling reduction benefits to the comprehensive mechanical properties of the composites.展开更多
Through the study of the corrosion behavior of Q235 steel in actual Yingtan soil and two simulated acidic soils with different water contents, the calculation of corrosion mass losses, and the analysis of the corrosio...Through the study of the corrosion behavior of Q235 steel in actual Yingtan soil and two simulated acidic soils with different water contents, the calculation of corrosion mass losses, and the analysis of the corrosion mor- phologies and products by means of scanning electron microscope （SEM） and X-ray diffraction （XRD）, the results demonstrated that the diatomite soil could simulate the corrosion in actual soil veritably. In both actual soil and simu- lated soil with 16.4% water content, the corrosion rates of Q235 steel were approximately 0.1 mm/a, the corrosion morphologies were mainly extension and connection of corrosion spots on sample surface, and the corrosion products were composed of a-FeOOH, γ-FeOOH, Fe3 O4 and Fe2O3. When other media conditions remained unchanged, the corrosion area of Q235 steel was larger in simulated soil with 34.5 % water content, and the corrosion rate reached 0.48 mm/a after 360 h of corrosion, which was nearly 5 times as the value in actual soil. Compared with the corro- sion products in actual soil, the proportion of γ-FeOOH in simulated soil with 34.5 % water content was higher, and the wα-FeOOH/wγ-FeOOH ratio was 1. 4, which was only 1/3 of the value in actual soil.展开更多
基金Item Sponsored by National Key Basic Research and Development Program of China(2010CB30806)Central South University Postdoctoral Funded Project of China(120961)
文摘Desulfurization performance with low binary basicity refining slag in 72 grade tire cord steel was calculated using FactSage and it is found that sulfur content in steel decreases with the increase of basicity of slag, MgO content in slag and slag/steel ratio while sulfur partition ratio between slag and steel increases gradually with the increase of basicity of slag as well as MgO content. Experiments were carried out and the results are of great agreements with theoretical calculation. Then industrial application tests were performed in a domestic plant and good results were achieved. Sulfur content in steel decreases gradually during refining process, as a result, sulfur content in the billets is controlled in the range of 0.007 1%-0.008 1%. Sulfur content in steel refined with slag basicity of 1.21 is lower than that of 1.02, while the plasticity of oxide compound inclusions is a little better controlled in low basicity heats. Using refining slag with basicity of 1.0-1.2 and MgO content of 5%-10% and reducing the slag takeover of LD are favorable for improving the desulfurization performance and the plasticity of inclusions during the industrial production.
文摘Cu based composites reinforced by 0%～25% (volume fraction) carbon nanotubes were prepared.The fracture behaviors and the rolling properties of the composites and the effects of the volume fraction of the carbon nanotubes were studied.The experimental results show that the fracture toughness of the composites is related to the pulling out and bridging of the carbon nanotubes in the fracture process.With the volume fraction of the carbon nanotubes increasing, the Vicker’s hardness and the compactness of the composites increase first and then decrease. The peaks of the hardness and the compactness occur at 12%～15% of volume fraction of carbon nanotubes.Some proper ratio of rolling reduction benefits to the comprehensive mechanical properties of the composites.
文摘Through the study of the corrosion behavior of Q235 steel in actual Yingtan soil and two simulated acidic soils with different water contents, the calculation of corrosion mass losses, and the analysis of the corrosion mor- phologies and products by means of scanning electron microscope （SEM） and X-ray diffraction （XRD）, the results demonstrated that the diatomite soil could simulate the corrosion in actual soil veritably. In both actual soil and simu- lated soil with 16.4% water content, the corrosion rates of Q235 steel were approximately 0.1 mm/a, the corrosion morphologies were mainly extension and connection of corrosion spots on sample surface, and the corrosion products were composed of a-FeOOH, γ-FeOOH, Fe3 O4 and Fe2O3. When other media conditions remained unchanged, the corrosion area of Q235 steel was larger in simulated soil with 34.5 % water content, and the corrosion rate reached 0.48 mm/a after 360 h of corrosion, which was nearly 5 times as the value in actual soil. Compared with the corro- sion products in actual soil, the proportion of γ-FeOOH in simulated soil with 34.5 % water content was higher, and the wα-FeOOH/wγ-FeOOH ratio was 1. 4, which was only 1/3 of the value in actual soil.
