Inter-particle bonding is an important factor affecting the property of cold sprayed metallic deposit.Because the interface bonding between particles in deposit is directly determined by plastic strain of particles du...Inter-particle bonding is an important factor affecting the property of cold sprayed metallic deposit.Because the interface bonding between particles in deposit is directly determined by plastic strain of particles during spraying,Cu deposits were made at series of impact velocities of 578 m s^-1 to 745 m s^-1 and 807 m s^-1 to correlate particle impact condition with microstructure and properties of the deposits.Results show that as the average particle impact velocity increases from 578 m s^-1 to 745 m s^-1 and 807 m s^-1,the deposition efficiency of feedstock powder increases from 58%to 84%and even to 95%.Although all three deposits reveal dense microstructure due to the high ductility of Cu,the deformation degree of the deposited particles remarkably increases with increasing impact velocity.The enhanced plastic deformation of the deposited particles leads to more dispersed oxide scale and thereby stronger interparticle bonding with the strength of the deposit along the deposition direction increasing from 25.8 MPa to 148.5 MPa.The electrical and thermal conductivities at through-thickness direction of the deposit at particle impact velocity of 807 m s^-1 are 78%IACS,295 W m^-1 K^-1,respectively.展开更多
Pinus densiflora var. zhangwuensis grows fast, and its drought and salinity resistance are better than Pinus sylvestris var. mongolica. We compared cold hardiness and mechanisms of cold hardiness between the two speci...Pinus densiflora var. zhangwuensis grows fast, and its drought and salinity resistance are better than Pinus sylvestris var. mongolica. We compared cold hardiness and mechanisms of cold hardiness between the two species, to provide a theoretical basis for promoting and applying P. densiflora var. zhangwuensis in cold regions. A cold stress experiment was carried out on 3-year-old plantlets of P. densiflora var. zhangwuensis and P. sylvestris var. mon- golica after hardening at five temperature regimes, 5, -10, -20, -40, and -60 ℃, respectively. Some indices of needle samples for both species were measured, such as relative conductivity （REL）, maximum photochemical efficiency （Fv/Fm）, malondialdehyde （MDA）, catalase （CAT）, proline （Pro）, soluble sugar （SS）, and stomata density. REL and MDA values of both species after hard- ening had the same trend of increasing, but the trend was opposite in Fv/Fm value with increasing cold stress. Com- pared with P. sylvestris var. mongolica, the P. densiflora var. zhangwuensis had smaller increases in REL and MDA, and a smaller decline in Fv/Fm during cold stress. Com- pared to the control, REL growth of P. densiflora var. zhangwuensis and P. sylvestris var. mongolica at -60 ℃were 0.41 and 0.60, and MDA growth was 29.94 mol g-1 FW and 47.80 mol g-1 FW, and Fv/Fm declines were 0.08 and 0.27. Half-lethal temperatures （LT50） calculated by logistic equation for P. densiflora var. zhangwuensis and P. sylvestris var. mongolica were -58.23 and -50.34 ℃, respectively. These data suggest that cold resistance of P. densiflora var. zhangwuensis is stronger than that of P. sylvestris var. mongolica. Cold-resistance mechanisms of the two species differed. In response to cold stress, P. sylvestris var. mongolica had strong osmotic adjustment ability because of higher Pro and SS content, while P. densiflora var. zhangwuensis had strong antioxidant ability due to stronger CAT activity. Stomata density and diameter of P. densiflora var. zhangwuensis were smalle展开更多
首先,将9,9-二(3,5-二甲基-4-羟基苯基)芴(DMBHF)、9,9-双(4-羟苯基)芴(BHF)和4,4’-二氟二苯甲酮(DFB)在高温下缩聚,得到聚芴醚酮(PFEK-x)(x=30、40、50,x为DMBHF含量,以DFB的物质的量计,下同);接着,利用溴代反应将PFEK-x的甲基功能化...首先,将9,9-二(3,5-二甲基-4-羟基苯基)芴(DMBHF)、9,9-双(4-羟苯基)芴(BHF)和4,4’-二氟二苯甲酮(DFB)在高温下缩聚,得到聚芴醚酮(PFEK-x)(x=30、40、50,x为DMBHF含量,以DFB的物质的量计,下同);接着,利用溴代反应将PFEK-x的甲基功能化为溴甲基;然后,通过4-羟基苯磺酸钠的SN2亲核取代制得具有不同离子交换容量的磺化聚芴醚酮(SPFEK-x);最后,通过溶液浇铸法成膜并酸化,制得新型低成本质子交换膜(PEMs)。采用^(1)HNMR、FTIR、TGA对其进行了表征,并对其性能进行了测试。结果表明,SPFEK-40膜具有较高的质子传导率及离子选择性、较低的钒离子渗透率及面电阻,综合性能优异。以SPFEK-40膜组装的全钒液流电池(VRFB)在电流密度为80 m A/cm^(2)时的能量效率为88.2%,高于以Nafion 212膜组装的VRFB的84.8%。此外,以SPFEK-40膜组装的VRFB在30次循环后放电容量保持率为84.3%,远高于以Nafion 212膜组装的VRFB(66.1%)。该合成路线的原料来源广泛,价格低廉,不涉及危险的磺化反应,易于工业放大。制得的SPFEK-x均具有良好的机械性能和氧化稳定性。展开更多
Developing water-saving irrigation regimes has important practical significance not only in alleviating the crucial water shortage,but also in controlling soil salinization for the protected cultivation in eastern Chi...Developing water-saving irrigation regimes has important practical significance not only in alleviating the crucial water shortage,but also in controlling soil salinization for the protected cultivation in eastern China.A field study with six treatments was conducted to evaluate the effects of different irrigation regimes with subdrainage systems on the soil nitrate nitrogen,salinity and moisture,also evaluate the effects on tomato growth,fruit yield and irrigation water use efficiency(IWUE).The treatments were distinguished by three different irrigation amounts of 310 mm,360 mm and 410 mm,and two irrigation frequencies of 7 and 11 times.Results showed that the irrigation amount had significant effects on the soil NO_(3)^(-)-N and electric conductivity(EC).A positive correlation was detected between soil NO_(3)^(-)-N(x)and EC(y)at 0-20 m depth after harvest,with a linear equation of y=0.063x-0.670.Soil volumetric moisture at 0.10 m and 0.20 m depth was increased as the irrigation amount increased.Moreover,a higher amount of irrigation increased the fruit yield but reduced the IWUE of tomato.It was also found that smaller irrigation amounts combined with frequent intervals could increase fruit yield and IWUE.However,the fruit quality of tomato had a significant(p<0.05)negative correlation with irrigation amount.Therefore,the parameters of irrigation regime including the irrigation amount and intervals should be considered comprehensively in order to find a compromise between salinity control and irrigation water use efficiency improvement.展开更多
基金financially supported by the National Nature Science Foundation of China(Grant Nos.51875443 and 51401158)the Shaanxi Co-Innovation Projects(Grant No.2015KTTSGY03-03)the Fund from The Key Lab of Guangdong for Modern Surface Engineering Technology and the Shaanxi Natural Science Foundation(Grant No.2015JQ5200).
文摘Inter-particle bonding is an important factor affecting the property of cold sprayed metallic deposit.Because the interface bonding between particles in deposit is directly determined by plastic strain of particles during spraying,Cu deposits were made at series of impact velocities of 578 m s^-1 to 745 m s^-1 and 807 m s^-1 to correlate particle impact condition with microstructure and properties of the deposits.Results show that as the average particle impact velocity increases from 578 m s^-1 to 745 m s^-1 and 807 m s^-1,the deposition efficiency of feedstock powder increases from 58%to 84%and even to 95%.Although all three deposits reveal dense microstructure due to the high ductility of Cu,the deformation degree of the deposited particles remarkably increases with increasing impact velocity.The enhanced plastic deformation of the deposited particles leads to more dispersed oxide scale and thereby stronger interparticle bonding with the strength of the deposit along the deposition direction increasing from 25.8 MPa to 148.5 MPa.The electrical and thermal conductivities at through-thickness direction of the deposit at particle impact velocity of 807 m s^-1 are 78%IACS,295 W m^-1 K^-1,respectively.
基金supported by the National Forestry Public Welfare Industry Research Project(201004023)Liaoning Agricultural Science and Technology Key Project(2011207002 and2011207004)
文摘Pinus densiflora var. zhangwuensis grows fast, and its drought and salinity resistance are better than Pinus sylvestris var. mongolica. We compared cold hardiness and mechanisms of cold hardiness between the two species, to provide a theoretical basis for promoting and applying P. densiflora var. zhangwuensis in cold regions. A cold stress experiment was carried out on 3-year-old plantlets of P. densiflora var. zhangwuensis and P. sylvestris var. mon- golica after hardening at five temperature regimes, 5, -10, -20, -40, and -60 ℃, respectively. Some indices of needle samples for both species were measured, such as relative conductivity （REL）, maximum photochemical efficiency （Fv/Fm）, malondialdehyde （MDA）, catalase （CAT）, proline （Pro）, soluble sugar （SS）, and stomata density. REL and MDA values of both species after hard- ening had the same trend of increasing, but the trend was opposite in Fv/Fm value with increasing cold stress. Com- pared with P. sylvestris var. mongolica, the P. densiflora var. zhangwuensis had smaller increases in REL and MDA, and a smaller decline in Fv/Fm during cold stress. Com- pared to the control, REL growth of P. densiflora var. zhangwuensis and P. sylvestris var. mongolica at -60 ℃were 0.41 and 0.60, and MDA growth was 29.94 mol g-1 FW and 47.80 mol g-1 FW, and Fv/Fm declines were 0.08 and 0.27. Half-lethal temperatures （LT50） calculated by logistic equation for P. densiflora var. zhangwuensis and P. sylvestris var. mongolica were -58.23 and -50.34 ℃, respectively. These data suggest that cold resistance of P. densiflora var. zhangwuensis is stronger than that of P. sylvestris var. mongolica. Cold-resistance mechanisms of the two species differed. In response to cold stress, P. sylvestris var. mongolica had strong osmotic adjustment ability because of higher Pro and SS content, while P. densiflora var. zhangwuensis had strong antioxidant ability due to stronger CAT activity. Stomata density and diameter of P. densiflora var. zhangwuensis were smalle
文摘首先,将9,9-二(3,5-二甲基-4-羟基苯基)芴(DMBHF)、9,9-双(4-羟苯基)芴(BHF)和4,4’-二氟二苯甲酮(DFB)在高温下缩聚,得到聚芴醚酮(PFEK-x)(x=30、40、50,x为DMBHF含量,以DFB的物质的量计,下同);接着,利用溴代反应将PFEK-x的甲基功能化为溴甲基;然后,通过4-羟基苯磺酸钠的SN2亲核取代制得具有不同离子交换容量的磺化聚芴醚酮(SPFEK-x);最后,通过溶液浇铸法成膜并酸化,制得新型低成本质子交换膜(PEMs)。采用^(1)HNMR、FTIR、TGA对其进行了表征,并对其性能进行了测试。结果表明,SPFEK-40膜具有较高的质子传导率及离子选择性、较低的钒离子渗透率及面电阻,综合性能优异。以SPFEK-40膜组装的全钒液流电池(VRFB)在电流密度为80 m A/cm^(2)时的能量效率为88.2%,高于以Nafion 212膜组装的VRFB的84.8%。此外,以SPFEK-40膜组装的VRFB在30次循环后放电容量保持率为84.3%,远高于以Nafion 212膜组装的VRFB(66.1%)。该合成路线的原料来源广泛,价格低廉,不涉及危险的磺化反应,易于工业放大。制得的SPFEK-x均具有良好的机械性能和氧化稳定性。
基金This work was financially supported by the National Natural Science Foundation of China(51509068)the China Postdoctoral Science Foundation(2015M581716)the Fundamental Research Funds for the Central Universities(2018B00314).
文摘Developing water-saving irrigation regimes has important practical significance not only in alleviating the crucial water shortage,but also in controlling soil salinization for the protected cultivation in eastern China.A field study with six treatments was conducted to evaluate the effects of different irrigation regimes with subdrainage systems on the soil nitrate nitrogen,salinity and moisture,also evaluate the effects on tomato growth,fruit yield and irrigation water use efficiency(IWUE).The treatments were distinguished by three different irrigation amounts of 310 mm,360 mm and 410 mm,and two irrigation frequencies of 7 and 11 times.Results showed that the irrigation amount had significant effects on the soil NO_(3)^(-)-N and electric conductivity(EC).A positive correlation was detected between soil NO_(3)^(-)-N(x)and EC(y)at 0-20 m depth after harvest,with a linear equation of y=0.063x-0.670.Soil volumetric moisture at 0.10 m and 0.20 m depth was increased as the irrigation amount increased.Moreover,a higher amount of irrigation increased the fruit yield but reduced the IWUE of tomato.It was also found that smaller irrigation amounts combined with frequent intervals could increase fruit yield and IWUE.However,the fruit quality of tomato had a significant(p<0.05)negative correlation with irrigation amount.Therefore,the parameters of irrigation regime including the irrigation amount and intervals should be considered comprehensively in order to find a compromise between salinity control and irrigation water use efficiency improvement.
