Concrete is extensively used construction material in the infrastructure development industry.With increase in technical knowhow,the need of research for high performance concretes such as self-compacting concrete(SCC...Concrete is extensively used construction material in the infrastructure development industry.With increase in technical knowhow,the need of research for high performance concretes such as self-compacting concrete(SCC)has increased in the last decade.The adaptability of SCC is due to its fluidic behavior in fresh state.However,to develop SCC using indigenous materials,the lack of standardized mix design procedures is the biggest impediment.Although with the advent of chemical admixtures,it is possible to achieve concrete with high fluidity,but at the same time durability issues require more attention.To have these fresh state properties SCC mixes are typically designed with high powder contents,and chemical admixtures.Proportioning and optimization of these materials is a key issue in the mix design of SCC.This paper focuses mainly on experimental study to optimize dosages of superplasticizer for mortar of SCC and then in concrete mixture itself.展开更多
In the present study,split tensile strength of self-compacting concrete with different amount of CuO nanoparticles has been investigated.CuO nanoparticles with the average particle size of 15 nm were added partially t...In the present study,split tensile strength of self-compacting concrete with different amount of CuO nanoparticles has been investigated.CuO nanoparticles with the average particle size of 15 nm were added partially to self compacting concrete and split tensile strength of the specimens has been measured.The results indicate that CuO nanoparticles are able to improve the split tensile strength of self compacting concrete and recover the negative effects of polycarboxylate superplasticizer on split tensile strength.CuO nanoparticle as a partial replacement of cement up to 4 wt% could accelerate C-S-H gel formation as a result of increased crystalline Ca（OH）2 amount at the early ages of hydration.The increase of the CuO nanoparticles more than 4 wt% causes the decrease of the split tensile strength because of unsuitable dispersion of nanoparticles in the concrete matrix.Accelerated peak appearance in conduction calorimetry tests,more weight loss in thermogravimetric analysis and more rapid appearance of related peaks to hydrated products in X-ray diffraction（XRD） results all also indicate that CuO nanoparticles up to4 wt% could improve the mechanical and physical properties of the specimens.Finally,CuO nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and few-harm pores.展开更多
In the present scenario,computational modeling has gained much importance for the prediction of the properties of concrete.This paper depicts that how computational intelligence can be applied for the prediction of co...In the present scenario,computational modeling has gained much importance for the prediction of the properties of concrete.This paper depicts that how computational intelligence can be applied for the prediction of compressive strength of Self Compacting Concrete(SCC).Three models,namely,Extreme Learning Machine(ELM),Adaptive Neuro Fuzzy Inference System(ANFIS)and Multi Adaptive Regression Spline(MARS)have been employed in the present study for the prediction of compressive strength of self compacting concrete.The contents of cement(c),sand(s),coarse aggregate(a),fly ash(f),water/powder(w/p)ratio and superplasticizer(sp)dosage have been taken as inputs and 28 days compressive strength(fck)as output for ELM,ANFIS and MARS models.A relatively large set of data including 80 normalized data available in the literature has been taken for the study.A comparison is made between the results obtained from all the above-mentioned models and the model which provides best fit is established.The experimental results demonstrate that proposed models are robust for determination of compressive strength of self-compacting concrete.展开更多
Wall cracking and mold expanding due to concrete vibrations can be effectively solved through the application of precast normal-concrete composite shear walls infilled with self-compacting concrete(SCC). However, the ...Wall cracking and mold expanding due to concrete vibrations can be effectively solved through the application of precast normal-concrete composite shear walls infilled with self-compacting concrete(SCC). However, the high liquidity of SCC will induce a higher lateral pressure. Therefore, it is important to obtain a better understanding of the template lateral pressure. In this work, nine composite shear walls were experimentally investigated, focusing on the effects of two parameters, i.e., the casting rate and the section width of the formwork. The time-varying pressure was monitored during the SCC pouring. It is found that the increase of casting rate from 3.2 m/h to 10.3 m/h resulted in a higher maximum lateral pressure. The higher casting rate led to a longer time required for the lateral pressure to drop to a steady value. There was no correlation between the section width and the rate of decrease in the initial formwork pressure and stable value. Based on the test results, a formula considering the effect of casting speed for the calculation of SCC formwork pressure was established to fill the gap in the current standards and for engineering applications.展开更多
With increasing environmental pressure to reduce solid waste and to recycle as much as possible,the concrete industry has adopted a number of methods to achieve this goal by replacement of waste glass with concrete co...With increasing environmental pressure to reduce solid waste and to recycle as much as possible,the concrete industry has adopted a number of methods to achieve this goal by replacement of waste glass with concrete composition materials.Due to differences in mixture design,placement and consolidation techniques,the strength and durability of Self Compacting Concrete(SCC)may be different than those of conventional concrete.Therefore,replacement of waste glass with fine aggregate in SCC should deeply be investigated compared to conventional concretes.The aim of the present study is to investigate the effect of glass replacement with fine aggregate on the SCC properties.In present study,fine aggregate has been replaced with waste glass in six different weight ratios ranging from 0%to 50%.Fresh results indicate that the flow-ability characteristics have been increased as the waste glass incorporated to paste volume.Nevertheless,compressive,flexural and splitting strengths of concrete containing waste glass have been shown to decrease when the content of waste glass is increased.The strength reduction of concrete in different glass replacement ratios is not remarkable,thus it can be produced SCC with waste glass as fine aggregate in a standard manner.展开更多
文摘Concrete is extensively used construction material in the infrastructure development industry.With increase in technical knowhow,the need of research for high performance concretes such as self-compacting concrete(SCC)has increased in the last decade.The adaptability of SCC is due to its fluidic behavior in fresh state.However,to develop SCC using indigenous materials,the lack of standardized mix design procedures is the biggest impediment.Although with the advent of chemical admixtures,it is possible to achieve concrete with high fluidity,but at the same time durability issues require more attention.To have these fresh state properties SCC mixes are typically designed with high powder contents,and chemical admixtures.Proportioning and optimization of these materials is a key issue in the mix design of SCC.This paper focuses mainly on experimental study to optimize dosages of superplasticizer for mortar of SCC and then in concrete mixture itself.
文摘In the present study,split tensile strength of self-compacting concrete with different amount of CuO nanoparticles has been investigated.CuO nanoparticles with the average particle size of 15 nm were added partially to self compacting concrete and split tensile strength of the specimens has been measured.The results indicate that CuO nanoparticles are able to improve the split tensile strength of self compacting concrete and recover the negative effects of polycarboxylate superplasticizer on split tensile strength.CuO nanoparticle as a partial replacement of cement up to 4 wt% could accelerate C-S-H gel formation as a result of increased crystalline Ca（OH）2 amount at the early ages of hydration.The increase of the CuO nanoparticles more than 4 wt% causes the decrease of the split tensile strength because of unsuitable dispersion of nanoparticles in the concrete matrix.Accelerated peak appearance in conduction calorimetry tests,more weight loss in thermogravimetric analysis and more rapid appearance of related peaks to hydrated products in X-ray diffraction（XRD） results all also indicate that CuO nanoparticles up to4 wt% could improve the mechanical and physical properties of the specimens.Finally,CuO nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and few-harm pores.
文摘In the present scenario,computational modeling has gained much importance for the prediction of the properties of concrete.This paper depicts that how computational intelligence can be applied for the prediction of compressive strength of Self Compacting Concrete(SCC).Three models,namely,Extreme Learning Machine(ELM),Adaptive Neuro Fuzzy Inference System(ANFIS)and Multi Adaptive Regression Spline(MARS)have been employed in the present study for the prediction of compressive strength of self compacting concrete.The contents of cement(c),sand(s),coarse aggregate(a),fly ash(f),water/powder(w/p)ratio and superplasticizer(sp)dosage have been taken as inputs and 28 days compressive strength(fck)as output for ELM,ANFIS and MARS models.A relatively large set of data including 80 normalized data available in the literature has been taken for the study.A comparison is made between the results obtained from all the above-mentioned models and the model which provides best fit is established.The experimental results demonstrate that proposed models are robust for determination of compressive strength of self-compacting concrete.
基金Funded by the National Natural Science Foundation of China(No.51178218)the Cooperation Project of Yangzhou Science and Technology Bureau(YZ2016267)
文摘Wall cracking and mold expanding due to concrete vibrations can be effectively solved through the application of precast normal-concrete composite shear walls infilled with self-compacting concrete(SCC). However, the high liquidity of SCC will induce a higher lateral pressure. Therefore, it is important to obtain a better understanding of the template lateral pressure. In this work, nine composite shear walls were experimentally investigated, focusing on the effects of two parameters, i.e., the casting rate and the section width of the formwork. The time-varying pressure was monitored during the SCC pouring. It is found that the increase of casting rate from 3.2 m/h to 10.3 m/h resulted in a higher maximum lateral pressure. The higher casting rate led to a longer time required for the lateral pressure to drop to a steady value. There was no correlation between the section width and the rate of decrease in the initial formwork pressure and stable value. Based on the test results, a formula considering the effect of casting speed for the calculation of SCC formwork pressure was established to fill the gap in the current standards and for engineering applications.
基金The experimental work of the present study was undertaken at the Concrete Laboratory of Rafsanjan University,IranThe authors are pleased to acknowledge the Vali-e-Asr University of Rafsanjan support.
文摘With increasing environmental pressure to reduce solid waste and to recycle as much as possible,the concrete industry has adopted a number of methods to achieve this goal by replacement of waste glass with concrete composition materials.Due to differences in mixture design,placement and consolidation techniques,the strength and durability of Self Compacting Concrete(SCC)may be different than those of conventional concrete.Therefore,replacement of waste glass with fine aggregate in SCC should deeply be investigated compared to conventional concretes.The aim of the present study is to investigate the effect of glass replacement with fine aggregate on the SCC properties.In present study,fine aggregate has been replaced with waste glass in six different weight ratios ranging from 0%to 50%.Fresh results indicate that the flow-ability characteristics have been increased as the waste glass incorporated to paste volume.Nevertheless,compressive,flexural and splitting strengths of concrete containing waste glass have been shown to decrease when the content of waste glass is increased.The strength reduction of concrete in different glass replacement ratios is not remarkable,thus it can be produced SCC with waste glass as fine aggregate in a standard manner.
