Rechargeable lithium batteries have been widely regarded as a revolutionary technology to store renewable energy sources and extensively researched in the recent several decades.As an indispensable part of lithium bat...Rechargeable lithium batteries have been widely regarded as a revolutionary technology to store renewable energy sources and extensively researched in the recent several decades.As an indispensable part of lithium batteries,the evolution of anode materials has significantly promoted the development of lithium batteries.However,since conventional lithium batteries with graphite anodes cannot meet the ever-increasing demands in different application scenarios(such as electric vehicles and large-scale power supplies)which require high energy/power density and long cycle life,various improvement strategies and alternative anode materials have been exploited for better electrochemical performance.In this review,we detailedly introduced the characteristics and challenges of four representative anode materials for rechargeable lithium batteries,including graphite,Li_(4)Ti_(5)O_(12),silicon,and lithium metal.And some of the latest advances are summarized,which mainly contain the modification strategies of anode materials and partially involve the optimization of electrode/electrolyte interface.Finally,we make the conclusive comments and perspectives,and draw a development timeline on the four anode materials.This review aims to offer a good primer for newcomers in the lithium battery field and benefit the structure and material design of anodes for advanced rechargeable lithium batteries in the future.展开更多
Sodium-ion batteries （SIBs） have been increasingly attracting attention as a sustainable alternative to lithium-ion batteries for scalable energy storage. The key to advanced SIBs relies heavily upon the development...Sodium-ion batteries （SIBs） have been increasingly attracting attention as a sustainable alternative to lithium-ion batteries for scalable energy storage. The key to advanced SIBs relies heavily upon the development of reliable anodes. In this respect, Bi2S3 has been extensively investigated because of its high capacity, tailorable morpholog, and low cost However, the common practices of incorporating carbon species to enhance the electrical conductivity and accommodate the volume change of Bi2S3 anodes so as to boost their durability for Na storage have met with limited success. Herein, we report a simple method to realize the encapsulation of Bi2S3 nanorods within three-dimensional, nitrogen-doped graphene （3DNG） frameworks, targeting flexible and active composite anodes for SIBs. The Bi2S3/ 3DNG composites displayed outstanding Na storage behavior with a high reversible capacity （649 mAh·g^-1 at 62.5 mA·g^-1） and favorable durability （307 and 200 mAh·g^-1 after 100 cycles at 125 and 312.5 mA·g^-1, respectively）. In-depth characterization by in situ X-ray diffraction revealed that the intriguing Na storage process of Bi2Sa was based upon a reversible reaction. Furthermore, a full, flexible SIB cell with Na0.4MnO2 cathode and as-prepared composite anode was successfully assembled, and holds a great promise for next-generation, wearable energy storage applications.展开更多
A tin film of 320 nm in thickness on Cu foil and its composite film with graphite of-50 nm in thickness on it were fabricated by magnetron sputtering. The surface morphology, composition, surface distributions of allo...A tin film of 320 nm in thickness on Cu foil and its composite film with graphite of-50 nm in thickness on it were fabricated by magnetron sputtering. The surface morphology, composition, surface distributions of alloy elements, and lithium intercalation/de-intercalation behaviors of the fabricated films were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, electron probe microanalyzer （EPMA）, X-ray photoelectron spectroscopy （XPS）, inductively coupled plasma atomic emission spectrometry （ICP）, cyclic voltammetry （CV）, and galvanostatic charge/discharge （GC） measurements. It is found that the lithium intercalation/de-intercalation behavior of the Sn film can be significantly improved by its composite with graphite. With cycling, the discharge capacity of the Sn film without composite changes from 570 mAh/g of the 2nd cycle to 270 mAh/g of the 20th cycle, and its efficiency for the discharge and charge is between 90% and 95%. Nevertheless, the discharge capacity of the composite Sn/C film changes from 575 mAh/g of the 2nd cycle to 515 mAh/g of the 20th cycle, and its efficiency for the discharge and charge is between 95% and 100%. The performance improvement of tin by its composite with graphite is ascribed to the retardation of the bulk tin cracking from volume change during lithium intercalation and de-intercalation, which leads to the pulverization of tin.展开更多
A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were em...A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurements. Compared with the plain graphite anode,the composite anode significantly improves the power density,5.5-fold higher,reaching 187.1 mW/m2 and gives a 27-fold higher exchange current density and a higher kinetic activity. A novel synergistic mechanism between sulfonated polyaniline and vanadate is proposed to explain the excellent electrochemical performance. This composite thus has great potential to be used as an anode material for a high-power BMFC.展开更多
Searching for advanced anode materials with excellent electrochemical properties in sodium-ion battery is essential and imperative for next-generation energy storage system to solve the energy shortage problem.In this...Searching for advanced anode materials with excellent electrochemical properties in sodium-ion battery is essential and imperative for next-generation energy storage system to solve the energy shortage problem.In this work,two-dimensional(2D)ultrathin FePS3 nanosheets,a typical ternary metal phosphosulfide,are first prepared by ultrasonic exfoliation.The novel 2D/2D heterojunction of FePS3 nanosheets@MXene composite is then successfully synthesized by in situ mixing ultrathin MXene nanosheets with FePS3 nanosheets.The resultant FePS3 nanosheets@MXene hybrids can increase the electronic conductivity and specific surface area,assuring excellent surface and interfacial charge transfer abilities.Furthermore,the unique heterojunction endows FePS3 nanosheets@MXene composite to promote the diffusion of Na^+ and alleviate the drastic change in volume in the cyclic process,enhancing the sodium storage capability.Consequently,the few-layered FePS3 nanosheets uniformly coated by ultrathin MXene provide an exceptional reversible capacity of 676.1 mAh g^−1 at the current of 100 mA g^−1 after 90 cycles,which is equivalent to around 90.6% of the second-cycle capacity(746.4 mAh g^−1).This work provides an original protocol for constructing 2D/2D material and demonstrates the FePS3@MXene composite as a potential anode material with excellent property for sodium-ion batteries.展开更多
Lithium(Li)is a promising candidate for nextgeneration battery anode due to its high theoretical specific capacity and low reduction potential.However,safety issues derived from the uncontrolled growth of Li dendrite ...Lithium(Li)is a promising candidate for nextgeneration battery anode due to its high theoretical specific capacity and low reduction potential.However,safety issues derived from the uncontrolled growth of Li dendrite and huge volume change of Li hinder its practical application.C onstructing dendrite-free composite Li anodes can significantly alleviate the above problems.Copper(Cu)-based materials have bee n widely used as substrates of the composite electrodes due to their chemical stability,excellent conductivity,and good mechanical strength.Copper/lithium(Cu/Li)composite anodes significantly regulate the local current density and decrease Li nucleation overp otential,realizing the uniform and dendrite-free Li deposition.In this review,Cu/Li composite methods including electrodeposition,melting infusion,and mechanical rolling are systematically summarized and discussed.Additionally,design strategies of Cu-based current collectors for high performance Cu/Li composite anodes are illustrated.General challenges and future development for Cu/Li composite anodes are presented and postulated.We hope that this review can provide a comprehensive understanding of Cu/Li composite methods of the latest development of Li metal anode and stimulate more research in the future.展开更多
基金supported by grants from the Natural Science Foundation of Jiangsu Province(BK20180098)the Open Research Fund of National Laboratory of Solid State Microstructures of Nanjing University(M32045&M33042)。
文摘Rechargeable lithium batteries have been widely regarded as a revolutionary technology to store renewable energy sources and extensively researched in the recent several decades.As an indispensable part of lithium batteries,the evolution of anode materials has significantly promoted the development of lithium batteries.However,since conventional lithium batteries with graphite anodes cannot meet the ever-increasing demands in different application scenarios(such as electric vehicles and large-scale power supplies)which require high energy/power density and long cycle life,various improvement strategies and alternative anode materials have been exploited for better electrochemical performance.In this review,we detailedly introduced the characteristics and challenges of four representative anode materials for rechargeable lithium batteries,including graphite,Li_(4)Ti_(5)O_(12),silicon,and lithium metal.And some of the latest advances are summarized,which mainly contain the modification strategies of anode materials and partially involve the optimization of electrode/electrolyte interface.Finally,we make the conclusive comments and perspectives,and draw a development timeline on the four anode materials.This review aims to offer a good primer for newcomers in the lithium battery field and benefit the structure and material design of anodes for advanced rechargeable lithium batteries in the future.
文摘Sodium-ion batteries （SIBs） have been increasingly attracting attention as a sustainable alternative to lithium-ion batteries for scalable energy storage. The key to advanced SIBs relies heavily upon the development of reliable anodes. In this respect, Bi2S3 has been extensively investigated because of its high capacity, tailorable morpholog, and low cost However, the common practices of incorporating carbon species to enhance the electrical conductivity and accommodate the volume change of Bi2S3 anodes so as to boost their durability for Na storage have met with limited success. Herein, we report a simple method to realize the encapsulation of Bi2S3 nanorods within three-dimensional, nitrogen-doped graphene （3DNG） frameworks, targeting flexible and active composite anodes for SIBs. The Bi2S3/ 3DNG composites displayed outstanding Na storage behavior with a high reversible capacity （649 mAh·g^-1 at 62.5 mA·g^-1） and favorable durability （307 and 200 mAh·g^-1 after 100 cycles at 125 and 312.5 mA·g^-1, respectively）. In-depth characterization by in situ X-ray diffraction revealed that the intriguing Na storage process of Bi2Sa was based upon a reversible reaction. Furthermore, a full, flexible SIB cell with Na0.4MnO2 cathode and as-prepared composite anode was successfully assembled, and holds a great promise for next-generation, wearable energy storage applications.
基金the National Nature Science Foundation of China (Nos. 50771046 and 20373016) the Natural Science Foundation of Guangdong Province (No. 05200534)the Key Projects of Guangdong Province and Guangzhou City, China (Nos. 2006A10704003 and 2006Z3-D2031)
文摘A tin film of 320 nm in thickness on Cu foil and its composite film with graphite of-50 nm in thickness on it were fabricated by magnetron sputtering. The surface morphology, composition, surface distributions of alloy elements, and lithium intercalation/de-intercalation behaviors of the fabricated films were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, electron probe microanalyzer （EPMA）, X-ray photoelectron spectroscopy （XPS）, inductively coupled plasma atomic emission spectrometry （ICP）, cyclic voltammetry （CV）, and galvanostatic charge/discharge （GC） measurements. It is found that the lithium intercalation/de-intercalation behavior of the Sn film can be significantly improved by its composite with graphite. With cycling, the discharge capacity of the Sn film without composite changes from 570 mAh/g of the 2nd cycle to 270 mAh/g of the 20th cycle, and its efficiency for the discharge and charge is between 90% and 95%. Nevertheless, the discharge capacity of the composite Sn/C film changes from 575 mAh/g of the 2nd cycle to 515 mAh/g of the 20th cycle, and its efficiency for the discharge and charge is between 95% and 100%. The performance improvement of tin by its composite with graphite is ascribed to the retardation of the bulk tin cracking from volume change during lithium intercalation and de-intercalation, which leads to the pulverization of tin.
基金supported by the Scientific and Technological Development Plan Project of Shandong Province, China (2008GG10007003)the Key Laboratory of Marine Environment & Ecology, Ministry of Education (2008010)the Key Laboratory of Submarine Geoscience and Exploring Technology of Ministry of Education, Ocean University of China (2008-01)
文摘A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurements. Compared with the plain graphite anode,the composite anode significantly improves the power density,5.5-fold higher,reaching 187.1 mW/m2 and gives a 27-fold higher exchange current density and a higher kinetic activity. A novel synergistic mechanism between sulfonated polyaniline and vanadate is proposed to explain the excellent electrochemical performance. This composite thus has great potential to be used as an anode material for a high-power BMFC.
基金support funding is from the National Natural Science Foundation of China(51871119 and 51901100)China Jiangsu Specially Appointed Professor,Jiangsu Provincial Founds for Natural Science Foundation(BK20170793 and BK20180015)+2 种基金China Postdoctoral Science Foundation(2018M640481 and 2019T120426)Jiangsu Postdoctoral Research Fund(2019K003 and 2019K201)Jiangsu-Innovate UK Business Competition(BZ2017061)
文摘Searching for advanced anode materials with excellent electrochemical properties in sodium-ion battery is essential and imperative for next-generation energy storage system to solve the energy shortage problem.In this work,two-dimensional(2D)ultrathin FePS3 nanosheets,a typical ternary metal phosphosulfide,are first prepared by ultrasonic exfoliation.The novel 2D/2D heterojunction of FePS3 nanosheets@MXene composite is then successfully synthesized by in situ mixing ultrathin MXene nanosheets with FePS3 nanosheets.The resultant FePS3 nanosheets@MXene hybrids can increase the electronic conductivity and specific surface area,assuring excellent surface and interfacial charge transfer abilities.Furthermore,the unique heterojunction endows FePS3 nanosheets@MXene composite to promote the diffusion of Na^+ and alleviate the drastic change in volume in the cyclic process,enhancing the sodium storage capability.Consequently,the few-layered FePS3 nanosheets uniformly coated by ultrathin MXene provide an exceptional reversible capacity of 676.1 mAh g^−1 at the current of 100 mA g^−1 after 90 cycles,which is equivalent to around 90.6% of the second-cycle capacity(746.4 mAh g^−1).This work provides an original protocol for constructing 2D/2D material and demonstrates the FePS3@MXene composite as a potential anode material with excellent property for sodium-ion batteries.
基金supported by the National Key Research and Development Program of China(No.2021YFB2500200)the National Natural Science Foundation of China(No.52302243)China Postdoctoral Science Foundation(Nos.2022M721029 and 2022M721030)。
文摘Lithium(Li)is a promising candidate for nextgeneration battery anode due to its high theoretical specific capacity and low reduction potential.However,safety issues derived from the uncontrolled growth of Li dendrite and huge volume change of Li hinder its practical application.C onstructing dendrite-free composite Li anodes can significantly alleviate the above problems.Copper(Cu)-based materials have bee n widely used as substrates of the composite electrodes due to their chemical stability,excellent conductivity,and good mechanical strength.Copper/lithium(Cu/Li)composite anodes significantly regulate the local current density and decrease Li nucleation overp otential,realizing the uniform and dendrite-free Li deposition.In this review,Cu/Li composite methods including electrodeposition,melting infusion,and mechanical rolling are systematically summarized and discussed.Additionally,design strategies of Cu-based current collectors for high performance Cu/Li composite anodes are illustrated.General challenges and future development for Cu/Li composite anodes are presented and postulated.We hope that this review can provide a comprehensive understanding of Cu/Li composite methods of the latest development of Li metal anode and stimulate more research in the future.
